Thank you for choosing Waves! In order to get the most out of your Waves
processor, please take the time to read through this manual.
In conjunction, we also suggest that you become familiar with
www.wavesupport.net. There you will find an extensive
Tech Specs
information on
By signing up at www.wavesupport.net, you will receive personalized information
on your registered products, reminders when updates are available, and
information on your authorization status.
, detailed
Registration
Installation
and
guides, new
Authorization
Software Updates
.
Answer Base
, and current
, the latest
1.1 Product Overview
Waves GTR Solo is a guitar tone processor featuring virtual guitar amps, cabs,
and effects. It can run as a DAW plug-in or as a standalone application for
processing live input. This means you can connect your guitar to a laptop
computer and use it live on stage, using a MIDI foot controller for real-time preset
selection and sound manipulation.
GTR Solo can run up to 4 Stomps and 1 Amp at any given time, as well as the
Tuner.
• The Stomp page allows editing of the Stomps chain and the placement of
the Amp within the processing chain.
• The Amp page allows editing of the Amp settings as well as the cabinets
and microphones used in the setup.
• The Tuner offers chromatic, standard, custom, and alternate guitar
tunings.
• The Presets page displays the list of presets in the current preset file and
allows auditioning and editing of presets and their order.
Waves GTR Solo User Guide
4
1.2 Automation
Automation for the GTR Solo consists of discrete automatable controls for the
Amp, and Tuner, as well as dynamic automation for the Stomps through an
assignable set of 9 continuous parameters and 1 toggle for each Stomp slot.
MIDI A
GTR Solo is automatable using MIDI controllers and MIDI notes.
MIDI controller mapping includes a “Learn” function which is accessed by right-
clicking the designated control, and all mapping is saved with the preset.
UTOMATION
Waves GTR Solo User Guide
5
Chapter 2 – Controls and Interface
The GTR Solo interface is divided into 3 sections:
WaveSystem Toolbar, specialized for GTR operation.
Main Editor Window, which displays the current page according to the page
selected in the bottom page selectors.
Bottom Section, with page selectors, input and output gain knobs and meters as
well as other global settings.
2.1 WaveSystem Toolbar
Undo Button offers up to 20 levels of undo/redo.
Preset Name Bar and Setup A/B Switcher is used to switch between the A and
B presets, changing the settings for all loaded processors (but not the processors
themselves or their order within the chain.)
Copy A -> B is used to copy the settings of the current setup to the other
setup. It displays A -> B when setup A is active and copy B -> A when setup B is
active.
Previous /Next Preset Arrows are used to scroll through presets.
Load is used to load Presets files or Presets from the currently selected
preset file.
Save is used to save current parameters to the current preset, a new
empty preset, or in place of an existing preset.
Help launches the GTR Solo Manual in PDF format.
Waves GTR Solo User Guide
6
2.2 Bottom Section
The bottom section of the GTR Solo interface includes page buttons as well as
controls and displays for tempo, input, and output settings.
P
AGE BUTTONS
• The Stomp page allows editing of the Stomps chain and the placement of
the Amp within the processing chain.
• The Amp page allows editing of the Amp settings as well as the cabinets
and microphones used in the setup.
• The Tuner page offers chromatic, standard, custom, and alternate guitar
tunings.
• The Presets page displays the list of presets in the current preset file and
allows auditioning and editing of presets and their order.
I
NPUT SECTION
.
I
NPUT GAIN
Range: -18dB to +18dB
Default: 0dB
I
NPUT METER
Range: -42dB to 0dBfs
Default: -42dB
is used to boost or attenuate input gain.
displays input level.
Waves GTR Solo User Guide
7
T
EMPO SECTION
T
EMPO
sets the reference tempo for effects synchronized to the host, in beats-
per-minute.
Range: 40 to 1200
Default: 120
T
AP
is used to calculate tempo when not in Sync mode. (Averages last 4 taps).
Range: 50 to 400 BPM (approximately)
S
YNC
controls synchronization to host tempo.
Range: On/Off
Default: Off
Output Section
O
UTPUT GAIN
is used to boost or attenuate output gain.
Range: -18dB to +18dB
Default: 0dB
O
UTPUT METER
displays output level.
Range: -42dB to 0dBfs
Default: -42dB
M
UTE OUTPUT
mutes the GTR Solo output.
B
YPASS OUTPUT
bypasses all GTR Solo processing.
A
MPS BYPASS
bypasses the GTR Solo Amps.
S
TOMPS BYPASS
bypasses the GTR Solo Stomps.
Waves GTR Solo User Guide
8
2.3 Stomps Page
The Stomps page provides control over the Stomps, their controls, and their
order in the effects chain, as well as Amp position within the chain.
GTR Solo includes 13 Stomp effects:
• OverDrive
• Distortion
• Phaser
• Flanger
• Chorus
• Delay
• WahWah
• Spring
• Pitcher
• Vibrolo
• GateComp
• EQ
• Volume
See Appendix A for more information on individual stomps.
Waves GTR Solo User Guide
9
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.