Watts Utility Hose Reels User Manual

For Commercial & Residential Applications

ES-UtilityHose-200

Job Name

Job Location

Engineer

Approval

–––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––

Contractor

Approval

Contractor’s P.O. No.

Representative

Utility Hose

Utility hose is manufactured with lightweight EPDM rubber reinforced with synthetic cord.

Applications

• Agricultural spray and construction site application where strength and versatility are a must.

• General air and water applications.

WARNING: Not intended for use with

potable water.

Resistant to

Excellent heat, ozone and weather resistance, with limited oil resistance.

Operating Temperature Range . . . . . -40°F (-40°C) to 180°F (82°C)

Material . . . . . . . . . . . . . . . . EPDM Rubber

Color . . . . . . . . . . . . . . . . . . Red

Hardness . . . . . . . . . . . . . . . . Durometer 75+/-3

––––––––––––––––––––––––––––––––––––––––––––

–––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––

Packaging

Dispenser spools

Pressure Range

O.D. I.D. WALL WORKING PRESSURE INch INch (PSI @ 70°F)

3/4 1/2 1/8 200 1 5/8 3/16 200 1-1/8 3/4 3/16 200 1-1/2 1 3/16 200 1-3/4 1-1/4 1/4 200 2 1-1/2 1/4 200

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca

A Watt s Water Technolo gies Company