Watlow Control Consoles Data sheet

Your Authorized Watlow Distributor Is:

Self-Contained
Units Combine
Superior Products
And Innovative
Mechanical Designs

Watlow combines superior products and innovative
mechanical designs in its series of control consoles. Watlow
designed these units using many of its temperature and
process controls, making them an excellent choice for point­of-use applications.

The standard Watlow control consoles are available in one,
two or four control loop configurations. Each unit is supplied
with a heavy-duty fused line cord, fused output receptacle, a
solid state relay and ON/OFF rocker switch. The powder­coated metal case has vent openings on the top and bottom
for heat dissipation, keeping internal case temperatures
lower. On some models, serial communication options are
available through Watlow’s ANAWIN

®

Windows®95-based software or EIA/TIA-232 or EIA/TIA-422.

Custom-made systems are also available. Please consult a
Watlow sales representative for details.

Watlow provides total system development from concept to
design... through quality controlled manufacturing to on-site
installation and start-up.

CONTROL CONSOLES

1241 Bundy Boulevard
Winona, Minnesota 55987-5580 USA
Phone: [phone]
Fax: [phone]
Internet: www.watlow.com
e-mail: [e-mail]

WIN-CC-0205

Registered Company

Winona, Minnesota USA

ISO 9001ISO 9001

Applications

• Plastics

• Packaging

• Food processing

• Semiconductor

• Laboratory

• Process

Features and Benefits

Compact size

• Fits easily into confined areas

Control options including on-off, proportional or
PID control

• Provides simple, reliable operation

Self-contained units

• Require no external components

Pre-wired

• Fast start-up and installation time

Thermocouple and RTD input

• Allows use of a low cost sensor of your choice

Serial communications

• Support for one-on-one, as well as remote networking of

controllers

© 2005 Watlow Electric Manufacturing Company Printed in the USA on Recycled Paper, 15 Percent Postconsumer Waste

Window®is a registered trademark of Microsoft.

To be automatically connected to the nearest North American Technical and Sales Office call:

1-800-WATLOW2

International Technical and Sales Offices: Australia, [phone] • China, [phone] • France, [phone] •

Germany, [phone] • Italy, [phone] • Japan, [phone] • Korea, [phone] • Malaysia, [phone] •
Mexico, [phone] • Singapore, [phone] • Spain, [phone] • Sweden, [phone] • Taiwan, [phone] •
Sweden, [phone] • United Kingdom, [phone]

CONTROL CONSOLES

Mini Control Console

The mini series is the smallest and most compact control
console offered, but features are not limited. The mini utilizes
a Watlow SERIES 935 or SD controller which can be set to a
number of different control modes. The solid state relay
provides longer heater life and a lower cost than other power
switching devices.The heater output is pre-wired for your
convenience. The Amp Mate-’n’-Lok
installation quick and easy.

Features

• Small foot print

• Pre-wired output

• AMP Mate-’n’-Lok

• Miniature thermocouple connector

• Watlow SERIES 935 or SD controller

• ON/OFF rocker switch

®

2-pin output connection

®

heater connector makes

Specifications

Controller

• Watlow SERIES 935

• Watlow SERIES SD (SD3C)

Dimensions

• 76 mm H x 90 mm W x 180 mm D

(3.0 in. H x 3.5 in W x 7.1 in. D)

Output Power Switching

• 8 amp maximum

• Output is powered through the line cord

Power Requirements

• 120VÅ(ac), +10 percent, -15 percent (NEMA 5-15 plug)

• 208/240V

(NEMA 6-15 plug)

• Fused 10 amp

Sensor Input

• Factory selectable thermocouple

• Miniature thermocouple jack and plug

Output Configuration

• AMP Mate-’n’-Lok®connector

• Mating connector provided

Operating Environment

• 0 to 45˚C (32 to 113˚F)

• 0 to 90 percent RH, non-condensing

Weight

• 0.9 kg (2 lbs)

Å(ac), ±10 percent, -15 percent

Ordering Information

Mini Control Console

Mate-’n’-Lok®is a registered trademark of AMP Company.

M I N I - - 0 0 0 0

Single zone;
self-contained unit

Input

J = Type J thermocouple
K = Type K thermocouple
T = Type T thermocouple
R = RTD (100 ohm; 2-wire only)

Control

G = SERIES SD (1⁄32 DIN)

w/EIA-485 comms
1 = SERIES 935
5 = SERIES SD (

Display Color

R = Red/Green (only color option

available onSERIES SD (1/32 DIN)

G = Green (only available on

SERIES 935)

Line Voltage

1 = 120VÅ(ac)
2 = 208/240V

Å(ac)

1

⁄32 DIN)