Waldorf RN8200G, RN8400G, RN8600G, RN8800G, RNL8200G Installation And Operation Manual
...
Installation and Operation Manual
Gas Cooktops
Series
RN8200G
RN8400G
RN8600G
RN8800G
Date Purchased
Serial Number
Dealer
Service Provider
228605-21
For use in GB, IE & DK
RNL8200G
RNL8400G
RNL8600G
RNL8800G
MANUFACTURED BY
Moffat Limited
Christchurch
New Zealand
INTERNATIONAL CONTACTS
AUSTRALIA
Moffat Pty Limited
E.Mail: vsales@moffat.com.au
Main Office: (tel) +61 (03) 9518 3888
(fax) +61 (03 9518 3833
Service: (tel): 1800 622 216
Spares: (tel): 1800 337 963
Customer Service: (tel): 1800 335 315
(fax): 1800 350 281
CANADA
Serve Canada
Web: www.servecanada.com
E.Mail: info@servecanada.com
Sales: (tel): 800 551 8795 (Toll Free)
Service: (tel): 800 263 1455 (Toll Free)
NEW ZEALAND
Moffat Limited
Web: www.moffat.co.nz
E.Mail: sales@moffat.co.nz
Main Office: (tel): 0800 663328
UNITED KINGDOM
Blue Seal
Web: www.blue-seal.co.uk
E.Mail: sales@blue-seal.co.uk
Sales: (tel): 0121 327 5575
(fax): 0121 327 9711
Spares: (tel): 0121 322 6640
(fax): 0121 327 9201
Service: (tel): 0121 322 6644
(fax): 0121 327 6257
UNITED STATES
Moffat
Web: www.moffat.com
Sales: (tel): 800 551 8795 (Toll Free)
(tel): +001 336 661 1556
(fax): +001 336 661 9546
Service: (tel): 800 858 4477 (Toll Free)
(tel): +001 366 661 1556
(fax): +001 336 661 1660
REST OF WORLD
Moffat Limited
Web: www.moffat.co.nz
E.Mail: export@moffat.co.nz
The reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless authorized previously in
writing by the manufacturer.
In line with policy to continually develop and improve its products, Moffat Ltd. reserves the right to change the specifications and
design without prior notice.
© Copyright Moffat Ltd. November 2010.
1
Waldorf Gas Cooktops
RN(L)8200G Gas Cooktop 300 mm wide.
RN(L)8400G Gas Cooktop 600 mm wide.
RN(L)8600G Gas Cooktop 900 mm wide.
RN(L)8800G Gas Cooktop 1200 mm wide.
Introduction .............................................................................................. 2
Specification .............................................................................................. 3
Model Numbers Covered in this Specification
General
Gas Supply Requirements
Gas Connection
Dimensions ................................................................................................ 5
Installation ..............................................................................................10
Installation Requirements
Unpacking
Location
Clearances
Assembly
Fitting Adjustable Feet / Rear Rollers to Leg Stand Units
Fitting Adjustable Feet / Rear Rollers to Cabinet and Refrigeration Bases
Gas Connection
Commissioning
Operation ................................................................................................. 16
Operation Guide
Description of Controls
Open Burners
Griddles
Cleaning and Maintenance ...................................................................... 19
General
After Each Use
Daily Cleaning
Weekly Cleaning
Periodic Maintenance
Fault Finding ............................................................................................ 23
Gas Conversion and Specifications.......................................................... 24
Conversion Procedure
Gas Specifications
Replacement Parts .................................................................................. 30
Contents
2
Introduction
We are confident that you will be delighted with your WALDORF GAS COOKTOPS, and it will become a
most valued appliance in your commercial kitchen.
To ensure you receive the utmost benefit from your new Waldorf Gas Cooktops, there are two important
things you can do.
Firstly:
Please read the instruction book carefully and follow the directions given. The time taken will be well
spent.
Secondly:
If you are unsure of any aspect of the installation, instructions or performance of your appliance,
contact your WALDORF dealer promptly. In many cases a phone call could answer your question.
CE Only:
These instructions are only valid if the country code appears on the appliance. If the code does not
appear on the appliance, refer to the supplier of this appliance to obtain the technical instructions for
adapting the appliance to the conditions for use in that country.
WARNING:
I
MPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY
DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS APPLIANCE.
WARNING:
INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER SMELLS GAS ARE TO BE POSTED IN A PROMINENT
LOCATION. THIS INFORMATION SHALL BE OBTAINED BY CONSULTING THE LOCAL GAS SUPPLIER.
WARNING:
G
REAT CARE MUST BE TAKEN BY THE OPERATOR TO USE THE EQUIPMENT SAFELY TO GUARD IT AGAINST RISK
OF FIRE.
• T
HE APPLIANCE MUST NOT BE LEFT ON UNATTENDED.
• I
T IS RECOMMENDED THAT A REGULAR INSPECTION IS MADE BY A COMPETENT SERVICE PERSON TO
ENSURE CORRECT AND SAFE OPERATION OF YOUR APPLIANCE IS MAINTAINED.
• DO NOT
STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPOURS OR LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.
•
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.
C
AUTION
:
This appliance is;
•
For professional use and is to be used by qualified persons only.
•
Only authorised service persons are to carry out installation, servicing and
gas conversion operations.
•
Components having adjustments protected (e.g. paint sealed) by the
manufacturer should not be adjusted by the user / operator.
•
DO NOT operate the appliance without the legs supplied fitted.
3
Specifications
Model Numbers Covered in this Specification
RN[1]8200G-[2]-[3] 2 Open Burners.
RN[1]8203G -[3] 300 mm Griddle.
RN[1]8400G-[2]-[3] 4 Open Burners.
RN[1]8403G-[2]-[3] 2 Open Burners + 300 mm Griddle.
RN[1]8406G -[3] 600 mm Griddle.
RN[1]8600G-[2]-[3] 6 Open Burners.
RN[1]8603G-[2]-[3] 4 Open Burners + 300 mm Griddle.
RN[1]8606G-[2]-[3] 2 Open Burners + 600 mm Griddle.
RN[1]8609G -[3] 900 mm Griddle.
RN[1]8800G-[2]-[3] 8 Open Burners.
RN[1]8803G-[2]-[3] 6 Open Burners + 300 mm Griddle.
RN[1]8806G-[2]-[3] 4 Open Burners + 600 mm Griddle.
RN[1]8809G-[2]-[3] 2 Open Burners + 900 mm Griddle.
NOTE:
[1]: - Back Options;
- - Standard Models.
L - Low Back Models.
[2] - Open Burner Options;
F - With Flame Failure Protection.
PF - With Pilot and Flame Failure Protection.
[3] - Base Stand Options;
B - Bench Mount.
CB - Cabinet Base (excluding RN8200G series).
LS - Leg Stand (excluding RN8200G series).
RB - Refrigerated Base (RN8600G and RN8800G series only).
General
A heavy duty, high efficiency Cooktop for modular kitchens. It has a high option Cooktop / Griddle
arrangement and is available either on industrial adjustable feet or on robust rollers. Griddle options
with 4 models of base unit available (except RN8200G model). Fitted with either 'Individual Flame
Failure' (F) or 'Pilot and Flame Failure' (PF) option for each open burner. Griddles are fitted with
pilot, flame failure and piezo ignition as standard. Easy clean stainless steel external finish.
4
Specifications
Gas Supply Requirements
- Non CE Only (Australia / New Zealand):
- CE Only:
Appliance Classification
Category: II
2H3P
(20, 30 / 37).
Flue Type: A1.
* - The burner operating pressure is to be measured at the manifold test point with two burners
operating at full setting. The operating pressure is ex-factory set, through the appliance
regulator and is not to be adjusted, apart from when carrying out gas conversion, if required.
(Refer to the ‘Gas Conversion’ section for details).
Gas Connection
Gas supply connection point is located at the rear of the appliance, approximately 130 mm from the
right hand side, 32 mm from the rear and 655 mm from the floor (55 mm for bench top –B models)
and is reached from beneath the appliance. (Refer to the ‘Dimensions’ section). With the exception
of the RN8200G-B and RN8203G-B models which are 100 mm from the right hand side, 32 mm from
the rear and 55 mm from the floor.
Connection is ½" BSP male thread (for RN8200G-B and RN8203G-B models).
Connection is ¾" BSP male thread (for all other models).
Natural Gas (G20) Propane (G31)
Open Burner
(each)
Griddle
(each 300mm section)
Open Burner
(each)
Griddle
(each 300mm section)
Heat Input
(nett)
Nominal 6.5 kW 5.5 kW 6.5 kW 5.5 kW
Reduced 1.75 kW 1.85 kW 1.75 kW 1.95 kW
Gas Rate (nett)
Nominal 0.69 m3/hr 0.58 m3/hr 0.51 kg/hr 0.43 kg/hr
Reduced 0.19 m3/hr 0.20 m3/hr 0.14 kg/hr 0.15 kg/hr
Supply Pressure 20 mbar 30 / 37 mbar
Burner Operating Pressure 9.5 mbar (*)
Gas Connection See ‘Gas Connection’ information overleaf
26 mbar (*)
Natural Gas LP Gas (Propane)
Input Rate (N.H.G.C.)
- each Open Burner
28 MJ/hr
(26,540 Btu/hr)
28 MJ/hr
(26,540 Btu/hr)
- each 300 mm Griddle Section
21 MJ/hr
(19,900 Btu/hr)
21 MJ/hr
(19,900 Btu/hr)
Supply Pressure
1.13 - 3.40 kPa
(4.5” -13.5” w.c.)
2.75 - 4.50 kPa
(11” -18” w.c.)
Burner Operating Pressure
0.95 kPa (*)
(3.7” w.c.)
2.6 kPa (*)
(10.0” w.c.)
Gas Connection See ‘Gas Connection’ information overleaf
5
Dimensions
Bench Models
Refer to Page 9 for Cooktop options
= Rating Plate Location for
this option.
R
RN
(L)
8400G-B
RN
(L)
8200G-B
R
RN
(L)
8600G-B
RN
(L)
8800G-B
6
Dimensions
Cabinet Base Models
RN8200G models - not available in Cabinet Base option.
RN
(L)
8400G-CB
RN
(L)
8600G-CB
R
= Rating Plate Location for
this option.
R
RN
(L)
8800G-CB
Refer to Page 9 for Cooktop options
7
Dimensions
Leg Stand Models
RN8200G models - not available in Leg Stand Base option.
RN
(L)
8400G-LS
Refer to Page 9 for Cooktop options
= Rating Plate Location for
this option.
R
R
RN
(L)
8600G-LS
RN
(L)
8800G-LS
8
Dimensions
Refrigerated Base Models
RN8200G and RN8400G models - not available in Refrigerated Base option.
RN
(L)
8600G-RB
RN
(L)
8800G-RB
Refer to Page 9 for Cooktop options
= Rating Plate Location
for this option.
R
R
9
Dimensions
Cooktop Options
RN
(L)
8200G
RN
(L)
8400G
RN
(L)
8800G
RN
(L)
8803G
RN
(L)
8806G
RN
(L)
8809G
RN
(L)
8600G
RN
(L)
8603G
RN
(L)
8606G
RN
(L)
8609G
RN
(L)
8203G
RN
(L)
8403G
RN
(L)
8406G
NOTE:
• RN8200G models are only available in Bench Model (-B) option.
• RN8400G models are available in Bench Model (-B), Cabinet Base (-CB), or Leg Stand (-LS)
model options.
• RN8600G and RN8800G are available in Bench Model (-B), Cabinet Base (-CB), Leg Stand
(-LS), or Refrigeration Base (-RB) model options.
For the Refrigeration Cabinet Specifications and Dimensions refer to the Refrigeration Cabinet
Installation and Operation Manual supplied with the appliance.
Loading...