Waldorf GP8900E, GP8120E, GPL8600E, GPL8900E, GPL8120E Installation And Operation Manual

Installation and Operation Manual

Electric Griddle

GP8600E
GP8900E
GP8120E

Date Purchased

Serial Number

Dealer

Service Provider

229350-13

For use in GB & IE

Installation and Operation Manual

GPL8600E
GPL8900E
GPL8120E

The reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless authorized previously in
writing by the manufacturer.

In line with policy to continually develop and improve its products, Moffat Ltd. reserves the right to change the specifications and
design without prior notice.

© Copyright Moffat Ltd. October 2012.

MANUFACTURED BY

Moffat Limited

Christchurch
New Zealand

INTERNATIONAL CONTACTS

AUSTRALIA

Moffat Pty Limited
Web: www.moffat.com.au
E.Mail: [e-mail]
Main Office: (tel) [phone]

(fax) [phone]

Service: (tel): 1800 622 216
Spares: (tel): 1800 337 963
Customer Service: (tel): 1800 335 315
(fax): 1800 350 281

CANADA

Serve Canada
Web: www.servecanada.com
E.Mail: [e-mail]
Sales: (tel): 800 551 8795 (Toll Free)
Service: (tel): 800 263 1455 (Toll Free)

NEW ZEALAND

Moffat Limited
Web: www.moffat.co.nz
E.Mail: [e-mail]
Main Office: (tel): 0800 663328

UNITED KINGDOM

Blue Seal
Web: www.blue-seal.co.uk
E.Mail: [e-mail]
Sales: (tel): [phone]

(fax): [phone]
Spares: (tel): [phone]
(fax): [phone]
Service: (tel): [phone]
(fax): [phone]

UNITED STATES

Moffat
Web: www.moffat.com
Sales: (tel): 800 551 8795 (Toll Free)

(tel): [phone]
(fax): [phone]
Service: (tel): 800 858 4477 (Toll Free)
(tel): [phone]
(fax): [phone]

REST OF WORLD

Moffat Limited
Web: www.moffat.co.nz
E.Mail: [e-mail]

Contents

Waldorf Electric Griddle

GP(L)8600E Electric Griddle, 600mm.
GP(L)8900E Electric Griddle, 900mm.
GP(L)8120E Electric Griddle, 1200mm.

Introduction ............................................................................................. 2

Specifications ........................................................................................... 3

Model Numbers Covered in this Specification

Electrical Supply Requirements

Electrical Connection

Dimensions ................................................................................................ 4

Installation ................................................................................................ 8

Installation Requirements

Unpacking

Location

Clearances

Assembly

Electrical Connection

Commissioning

Operation ................................................................................................ 11

Operation Guide

Description of Controls

Griddle Operation

Cleaning and Maintenance ...................................................................... 12

General

After Each Use

Daily Cleaning

Weekly Cleaning

Periodic Maintenance

Fault Finding ........................................................................................... 15

Circuit Schematics ................................................................................... 16

Replacement Parts List ........................................................................... 20

2

Introduction

We are confident that you will be delighted with your WALDORF ELECTRIC GRIDDLE, and it will become a
most valued appliance in your commercial kitchen.
To ensure you receive the utmost benefit from your new WALDORF Appliance, there are two important
things you can do.

Firstly:

Please read the instruction book carefully and follow the directions given. The time taken will be well
spent.

Secondly:

If you are unsure of any aspect of the installation, instructions or performance of your appliance,
contact your WALDORF dealer promptly. In many cases a phone call could answer your question.

CE Only:

These instructions are only valid if the country code appears on the appliance. If the code does not
appear, refer to the supplier of this appliance to obtain the technical instructions for adapting the appli­ance to the conditions for use in that country.

IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY

DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS APPLIANCE.

Warning

THE OPERATOR MUST TAKE GREAT CARE TO USE THE EQUIPMENT SAFELY TO GUARD AGAINST THE RISK OF FIRE

AND INJURY.

 THE APPLIANCE MUST NOT BE LEFT ‘ON’, UNATTENDED.
 I

T IS RECOMMENDED THAT A REGULAR INSPECTION IS MADE BY A COMPETENT SERVICE PERSON TO

ENSURE CORRECT AND SAFE OPERATION OF YOUR APPLIANCE IS MAINTAINED.

 DO NOT

STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPOURS OR LIQUIDS IN THE VICINITY OF THIS

OR ANY OTHER APPLIANCE.



DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION.

Warning



This appliance is for professional use and is only to be used by qualified
persons.



Only authorised service persons are to carry out installation and servicing
operations.



Components having adjustments protected (e.g. paint sealed) by the
manufacturer should not be adjusted by the user / operator.



DO NOT operate the appliance without the legs supplied fitted.

Caution

3

Specifications

Model Numbers Covered in this Specification

GP[1]8600E - B Electric Griddle 600mm wide Bench Model.
GP[1]8600E - CB Electric Griddle 600mm wide with Cabinet Base.
GP[1]8600E - LS Electric Griddle 600mm wide on Leg Stand.

GP[1]8900E - B Electric Griddle 900mm wide Bench Model.
GP[1]8900E - CB Electric Griddle 900mm wide with Cabinet Base.
GP[1]8900E - LS Electric Griddle 900mm wide on Leg Stand.
GP[1]8900E - RB Electric Griddle 900mm wide with Refrigerated Base.

GP[1]8120E - B Electric Griddle 1200mm wide Bench Model.
GP[1]8120E - CB Electric Griddle 1200mm wide with Cabinet Base.
GP[1]8120E - LS Electric Griddle 1200mm wide on Leg Stand.
GP[1]8120E - RB Electric Griddle 1200mm wide with Refrigerated Base.

NOTE: [1]: - - Standard Back Models.
L - Low Back Models.

Electrical Supply Requirements

Electrical Connection

When connecting a Waldorf electric appliance to the mains supply, ensure that the following is carried out:-

 An isolating switch is fitted within 2m of the appliance, but not on the appliance and in such a

position that the user does not have to reach across the cooking surface.

 Supply cord shall be oil-resistant, sheathed flexible cable and not lighter than ordinary

polychloroprene or other equivalent synthetic elastomer sheathed cord (as per AS / NZS 3191
part 2.10.11. or IEC 60245-IEC-57) e.g. H05 RN-F Type.

 The branch supply line shall be individually overload protected to the correct current rating and

the supply chord shall be protected against any mechanical or thermal damage.

 A grommet is fitted around the wiring entry hole into the appliance.

 All wiring connections must be tight.

Refer to the appropriate wiring standards for the size of cable that is to be supplied to an appliance for the
current drawn on that line.

Model Power Connection Input Rating

230 - 240 V, 50 / 60 Hz,

1 P+N+E.

7.2 kW, 30 A @ 240 V

380 V, 50 / 60 Hz,

3 P+N+E.

7.2 kW,

GP8900E

400 - 415 V, 50 / 60 Hz,

3 P+N+E.

12 kW,

L1 - 16.4 Amps
L2 - 16.4 Amps @ 415 V
L3 - 16.4 Amps

GP8120E

400 - 415 V, 50 / 60 Hz

3 P+N+E.

18 kW,

L1 - 24.5 Amps
L2 - 24.5 Amps @ 415 V
L3 - 24.5 Amps

GP8600E

L1 - 11.5 Amps
L2 - 11.5 Amps @ 380 V
L3 - 11.5 Amps

THIS APPLIANCE MUST BE EARTHED. IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY A SUITABLY

QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.

Warning

For the Refrigeration Cabinet Specifications refer to the Refrigeration Cabinet Installation and
Operation Manual supplied with the appliance.

4

Dimensions

GP(L)8600E - B

GP(L)8900E - B

GP(L)8120E - B

Dimensions for Bench Models

= Rating Plate Location for

this option.

R

R

5

Dimensions

GP(L)8600E - CB

Dimensions for Cabinet Base Models

= Rating Plate Location for

this option.

R

GP(L)8900E - CB

GP(L)8120E - CB

R