Wacom One CTH-671, One CTH-471, CTH-471, CTH-651 User Manual

Contents

Index

User’s manual

Wacom Tablet (CTH-471, CTH-671)

Setting up your tablet Customizing your tablet Customize your pen experience Caring for Your tablet Troubleshooting Product information Technical support options

Contents Index

Contents

Index

One by Wacom User’s Manual Version 1.2, Rev H3013

reserves the right to revise this publication without obligation to provide notification of such changes. does its best to provide current and accurate information in this manual. However, reserves the right to change any specifications and product configurations at its discretion, without prior notice and without obligation to include such changes in this manual.

The above year indicates when this manual was prepared. However, the date of release to the users of the “manual” is simultaneous with the introduction into the market of the applicable product.

Wacom is a registered trademark of Wacom Co., Ltd. Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United

States and/or other countries. Microsoft, Windows, and Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple, the Apple logo, and Mac are trademarks of Apple, Inc., registered in the U.S. and other countries.

Any additional company and product names mentioned in this documentation may be trademarked and/or registered as trademarks. Mention of third-party products is for information purposes only and constitutes neither an endorsement nor a recommendation. assumes no responsibility with regard to the performance or use of these products.

Contents Index

Contents

Index

TABLE OF CONTENTS

ABOUT THE MANUAL 4 GETTING STARTED 5

Your Pen tablet 5 Pen 6 Pen holder 6

SETTING UP YOUR TABLET 7 Ergonomics 7 Configuring tablet orientation 8 Working with multiple monitors 9 Control panel basics 9

USING YOUR TABLET 10 The pen experience with the tablet 11 Using the pen on the tablet 11

Positioning 12 Clicking 13 Dragging 13 Using the pen buttons 14 Writing and drawing with pressure sensitivity 15 Erasing 16 Eye-hand coordination exercise 17 Customizing pen input 17

Technical support options 38 Obtaining driver downloads 39 Product information 39 Ordering parts and accessories 39

APPENDIX 40 Caring for your tablet 40 Replacing the pen nib 41 Uninstalling 42 Managing preferences 43 Pen and digital ink capabilities in Windows 44 Product information 45 Ordering parts and accessories 46

Available accessories 46

GLOSSARY 47 Wacom international offices 49

CUSTOMIZING YOUR TABLET 18 Opening the control panel 18 Control panel overview 19 Customize your pen experience 20

Setting the tip and eraser feel, and

double-click distance 21 Setting the pen button functions 22 Setting the tablet mapping 23

Portion of screen area 25 Portion of tablet area 25

Setting the pen speed in mouse mode 26 Customizing tablet Orientation 27 Working with Display Toggle 28 Button functions 29 Testing your tablet 33 Tes ti ng a pen 33 Troubleshooting 34

General problems 34 Pen input problems 34 Windows-specific problems 36 Mac-specific problems 36

Contents Index

Contents

top ic

Contents

Index

ABOUT THE MANUAL

This manual provides quick access to information about your tablet. The information is common to Windows and Mac computers and Windows screen captures are shown, unless otherwise noted.

• Go directly to table of contents

• Use the navigation controls to move through the manual.

Go to topic Go to front page.

Go to table of contents. Page back, or page forward.

Go to index. Go back to previous view.

• You can use your .pdf viewer zoom-in tool to increase the size of the manual on your display screen.

Most .pdf viewers include additional tools for using and printing the manual. See the viewer application help for more information.

MALL CAPITAL LETTERS are used to identify the names of keyboard keys, dialog boxes, and control panel

•S

options.

• Be sure to see also the Important Product Information guide for the tablet, located on the tablet

Installation CD. The guide includes product safety precautions, specifications, and your license agreement.

• The following information is not included with this product: information about your specific computer

hardware or operating system, or information about your application software. Your best source for this information is the set of manuals and discs that came with your hardware, operating system, or application.

• In addition to the built-in inking support found within Microsoft Windows 8, Windows 7 and Vista, many

graphics applications also support pressure sensitivity and the pen eraser. You can find a listing of applications that support these features on Wacom’s website (see product information

• For information on how best to use tablet features within a specific application, see the instructions in

that application’s manuals.

or index topics by clicking on them.

Note: This manual does not describe how to install your tablet. Please refer to your product Quick Start

Guide, and use the automated software installer (located on the tablet Installation CD).

Wacom’s philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. Therefore, some changes, modifications, and improvements may not be covered in this manual.

Contents Index

Contents

USB cable, detachable Disconnect the USB

cable when storing the tablet. Do not wrap the cable around the tablet.

Status LED Glows blue when the tablet is connected to an active

USB port. Brightens when using the pen.

Pen holder

Active area This is the active area for pen input.

Learn about your pen

and

Customize your pen experience

Index

GETTING STARTED

This section introduces you to your tablet, and helps you become familiar with its appearance and features.

• Not all product models are available in all regions.

• Your tablet can only be used with compatible pens or input devices. Wacom cannot guarantee

compatibility with older tablets or pens. You cannot use pens or input devices from a previous version of the tablet. A pen from your new tablet cannot be used with other tablets.

Your Pen tablet Pen Pen holder

YOUR PEN TABLET

Contents Index

PEN

Eraser (when equipped)

Pen buttons

Replaceable nib

(pen tip)

Pen

Cordless, battery-free, and pressure sensitive. Use this freehand tool for image editing and creating natural-looking pen strokes. It is also an efficient tool for document annotation and taking notes in applications that support handwriting recognition.

You will find the pen ideally suited to enhance your workflow by enabling the pen and digital ink features found within Microsoft Windows 8, Windows 7, Vista, and Office 2007 or later. Take advantage of digital mark-up for collaborative editing and use digital ink to take notes in applications that support handwriting recognition.

Important: When not in use, place the pen in the pen holder or lay it flat on your desk. When equipped, the eraser end of the pen should be inserted first into the loop. To maintain the sensitivity of your pen, do not store it in a container where it will rest on the tip or eraser.

Leaving the pen on the tablet may interfere with screen cursor positioning when using other pointing devices, or may prevent your computer from going to sleep.

• Insert the eraser end of the pen into the loop.

• Do not wedge the pen buttons inside the loop. Doing so may cause the buttons to be continually depressed and possibly fail.

Important: You can also lay the pen flat on your desk. Leaving the pen on the tablet may interfere with screen cursor positioning when using other pointing devices, or may prevent your computer from going to sleep.

Do not store the pen in a holder or stand other than the one provided with your tablet or purchased from Wacom. The pen may be damaged if it falls out of an unsuitable stand. The sensitivity of your pen may be affected if stored in a container where it rests on the tip or eraser.

Contents

Index

PEN HOLDER

When not in use, store the pen in the pen holder.

Contents Index

Contents

• Maintain a good posture at all times.

• Use a gentle grip when working with the pen.

• Periodically shift your gaze from your computer and focus on other objects in the room. This will help to relax your eyes.

• Take short breaks between tasks to stretch and relax your muscles.

• Alternate tasks and tools throughout the day. Minimize awkward postures and repetitive movements that cause discomfort.

• Change your position if you feel any discomfort due to your work position.

• If you are using the tablet as a primary pointing device and mouse replacement, try placing it to the side of the keyboard nearest to your dominant hand (for example, to the right of the keyboard if you are right-handed).

• If you are using the tablet primarily as a creative tool, try placing the tablet below the keyboard, centered with respect to your monitor.

Index

SETTING UP YOUR TABLET

To minimize fatigue, comfortably organize your work area. Position your tablet, pen, and keyboard for easy access without unnecessary reaching. Adjust your monitor so you can view it comfortably with minimum eyestrain. For best results, position the tablet so the screen cursor follows the same direction as your hand movements on the tablet.

Ergonomics Configuring tablet orientation Working with multiple monitors Control panel basics

ERGONOMICS

Note regarding RSI: Wacom makes no representation, promise or guarantee that Wacom products will cure or

prevent, in whole or in part, mouse-induced repetitive stress symptoms, injuries or conditions. Individual results may vary. Always obtain competent medical advice to determine the most appropriate treatment for your specific situation.

Contents Index

Contents

Right-handed operation:

• Open the tablet control panel and select the T

ABLET tab. Choose RIGHT HANDED. The tablet

driver automatically configures all aspects of the tablet for correct right-handed use. See Opening

the control panel

• Physically rotate your tablet.

Left-handed operation

• Open the tablet control panel and select the T

ABLET tab. Choose LEFT HANDED. The tablet

driver automatically configures all aspects of the tablet for correct left-handed use.

• Physically rotate your tablet.

Index

CONFIGURING TABLET ORIENTATION

When you first installed the tablet, you were prompted to choose a default tablet orientation. The orientation you chose was used to determine the tablet default settings. However, you can easily reconfigure the tablet for left- or right-handed users at any time.

Note: This procedure does not affect the default orientation. At the system log on and user switching

screens, the tablet uses the default orientation you chose during the install process. To change the default orientation, you must re-install the tablet driver.

Contents Index

Contents

Monitor 1

Monitor 2

Example of tablet mapping to the entire system desktop, which is displayed on two monitors.

Example of tablet mapping to a single monitor.

Index

WORKING WITH MULTIPLE MONITORS

If your computer is equipped with more than one monitor, the tablet will map to your monitors based upon how they are configured in the display properties control panel.

• If more than one monitor is in use and you are in extended monitor mode, the tablet maps to all monitors as if they were one large display.

• If your monitors are in mirror mode (both monitors display the same content), the tablet maps to the entire space on each monitor and the screen cursor is displayed on each monitor simultaneously.

See your hardware and operating system documentation for details on configuring your computer and operating system for use with multiple monitors.

You can customize the tablet to map to a single monitor, or to a portion of the monitor area. See setting the

tablet mapping.

CONTROL PANEL BASICS

After mastering the basics of using your tablet, you may want to customize the way your pen input works. The tablet control panel is where you customize your tablet settings.

Opening the control panel Control panel overview

Contents Index

Contents

Annotation Simplify document reviews by using the pen to

digitally mark-up and annotate documents.

Photo editing Use the pressure-sensitive pen to edit images

within a photo or image editing application.

Pen input The pen works only on the active area of the tablet. Wherever you place the pen on the tablet, the screen pointer will jump

to the corresponding point on the screen. The screen pointer indicates pen position, and follows the movement of the pen across the tablet surface.

Learn about The pen experience with the tablet

Note: The active area is a mapped representation of your computer

screen(s). By default it uses the entire screen or all screens if you have multiple displays. You can customize the mapping relationship for pen input by setting the tablet mapping

Index

USING YOUR TABLET

If you are new to using the tablet, read the following sections. As you work, you will discover many ways of interacting with your tablet. For example:

For details on these and other ways to work with your tablet, see The pen experience with the tablet. .

Working with Display Toggle

Contents Index

Contents

Position for drawing and navigation

Position for erasing

When you are not using the pen, store it in the pen holder

. When equipped, the eraser end of the pen should be inserted first into the loop.

Index

THE PEN EXPERIENCE WITH THE TABLET

Your tablet is designed to enhance the way you work. Tablet models equipped for pen input enable you to interact with a computer using the pen on the active area of the tablet.

Using the pen on the tablet Customizing pen input Working with Display Toggle

Hold the pen like you would hold a normal pen or pencil. Make sure the pen buttons are in a convenient location where you can toggle them with your thumb or forefinger, but not accidentally press them while drawing or positioning with the pen. Tilt the pen in any way that feels most comfortable.

Important: When not in use, place the pen in the pen holder or lay it flat on your desk. To maintain the sensitivity of your pen, do not store it in a container where it will rest on the tip or eraser. Leaving the pen on the tablet may interfere with screen cursor positioning when using other pointing devices, or may prevent your computer from going to sleep.

USING THE PEN ON THE TABLET

There are four basic techniques for using the pen: positioning, clicking, double-clicking, and dragging. If you are unfamiliar with using the pen, try the exercises on the following pages.

Positioning Clicking Dragging Using the pen buttons Writing and drawing with pressure sensitivity Erasing Eye-hand coordination exercise

Contents Index

Contents

Lift the pen and place the pen tip on the tablet active area. The cursor jumps to the new location.

Move the screen cursor by hovering the pen over the tablet surface. Do this without

touching the tablet surface, but while still keeping the pen tip within proximity of the tablet.

To select an icon or folder, use your pen to position the screen cursor over the object. Press down to select.

Tips

If you find using a pen to be somewhat difficult, try the eye-hand coordination

exercise.

Pointing is easier when you orient the tablet square to the computer monitor so the screen cursor follows the same direction as your hand movements on the tablet.

7 mm (0.28 inch) proximity

16 mm (0.63 inch) proximity range

When positioning the screen cursor and operating a pen button, the pen tip needs to be within 7 mm (0.28 inch) of the tablet surface. The pen tip does not need to touch the tablet in order to move the screen cursor or use a pen button.

Index

POSITIONING

Use the pen to position the pointer (or cursor) on your screen.

You can set the pen to position the screen cursor two different ways (see setting the tablet mapping

• In pen mode

, wherever you place the pen on the tablet, the screen cursor will jump to a corresponding point on the display screen. The screen pointer indicates pen position, and follows the movement of the pen across the tablet surface. This is the default setting for the pen.

• In mouse mode, move the cursor with a “pick up and slide” motion similar to using a mouse.

Contents Index

Contents

Tip: Configure Windows to select when hovering the pen over an icon and to launch the icon with a single click.

To turn on this feature, first open a folder. Windows 8, Windows 7 and Vista

: From the ORGANIZE pull-down menu choose FOLDER AND SEARCH

PTIONS.... From the GENERAL tab select SINGLE-CLICK TO OPEN AN ITEM (POINT TO SELECT).

Windows XP

: From the TOOLS pull-down menu choose FOLDER OPTIONS.... From the GENERAL tab select

INGLE-CLICK TO OPEN AN ITEM (POINT TO SELECT).

Clicking

. Tap the pen tip once on the tablet, or press the pen tip on the tablet with enough force to register a click. Try clicking on a folder icon by moving the screen cursor over the icon and pressing down on the pen tip. The folder should highlight when you press.

If C

LICK SOUND is selected in the tablet control panel and

your computer speakers are on, then you will hear a “click” sound when the pen tip is pressed hard enough to generate a button click. Adjust your speaker volume as necessary.

Double-clicking

. Quickly tap the tablet twice in the same place with the pen tip. This is like clicking twice with a mouse button. Try double-clicking on a folder icon to open it.

Tip:

Set a pen button to DOUBLE CLICK. This is

easier than tapping twice with the pen tip, and is the preferred method of doubleclicking with a pen.

First point to an object. Then press the pen tip to the tablet and slide it across the tablet surface. The selected object will move across the display screen.

To select text within a document, move the screen cursor to the beginning of a text line. Then drag the pen across the tablet to highlight the text.

Index

CLICKING

Click to highlight or select an item on the screen. Double-click to open it.

DRAGGING

Dragging is used to select and move objects on the monitor screen.

Contents Index

Contents

The default button positions are:

Tip

: Set a pen button to DOUBLE CLICK. This is easier than tapping

twice with the pen tip.

Upper: R

IGHT CLICK

Lower: PAN/SCROLL

PAN/SCROLL lets you position a document or image in any direction within the active window simply by pressing the pen button and moving the pen tip across the tablet. As you move the pen tip, the document or image is repositioned to follow the direction of pen movement on the tablet. Release the pen button or lift the pen tip from the tablet surface when done.

In some application windows the document will precisely follow the screen cursor as you move the pen tip. In others it will simply move in the same general direction as the screen cursor.

Use R

IGHT CLICK to bring up application-specific

or icon-specific menus.

Index

USING THE PEN BUTTONS

The pen comes equipped with two buttons. Each button has a programmable function that is selected when you press the button. You can use a pen button whenever the pen tip is within 7 mm (0.28 inch) of the tablet active area. You do not have to touch the pen tip to the tablet in order to use a button.

To assign new button functions, see setting the pen button functions

Contents Index

Contents

To write, ink, or draw with pressure sensitivity, move the pen along the surface of the tablet while applying various amounts of pressure downward on the tip of the pen.

• Press hard for thick lines or dense

color.

• Press gently for thin lines or softer

color.

Note that some applications require you first select a pressure-sensitive tool from the application tool palette.

To adjust the tip feel, see setting the tip

and eraser feel, and double-click distance.

Visit the Wacom website to learn about applications that support pressure. See product information

Index

WRITING AND DRAWING WITH PRESSURE SENSITIVITY

The pen responds to your hand movements, enabling you to create natural-looking pen and brush strokes within applications that support this feature. The digital ink and Office 2007 or later, as well as the drawing tools in many graphics applications, respond to the pressure you place on the pen. For example, sliders are used in some applications to vary line characteristics such as width, color, and opacity. These characteristics can be controlled much better by the pen’s pressure sensitivity. You can vary line width, blend colors, and change opacity with the pressure you exert upon the pen.

tools in Microsoft Windows 8, Windows 7, Vista,

Contents Index

Contents

Use the pen eraser in Windows 8, Windows 7, and Vista to erase notes or sketches made with Pen and

digital ink capabilities in Windows, and to select and

delete text or spreadsheet cells within an application. In supporting text applications use the eraser to select text, then lift the eraser from the tablet to delete the text.

You can erase intuitively and naturally in graphics applications that support the pen eraser. When you use the pen eraser, the application will automatically switch to the eraser tool.

In applications that support pressure sensitivity, you can select pressure-sensitive tools in the application tool palette to vary the width and depth of your erasures as you change the amount of pressure exerted upon the pen.

See setting the tip and eraser feel, and double-click

distance.

Index

ERASING

The pen eraser (when equipped) works like the eraser on a pencil.

Visit the Wacom website to learn about applications that support the eraser. If the eraser is not supported in an application, you can still use the eraser for positioning, drawing, or annotation.

Contents Index

Contents

Index

EYE-HAND COORDINATION EXERCISE

This exercise is designed to retrain your eye-hand coordination for using the pen:

1. Open any graphics application. Use the line tool to draw a rectangular grid with line spacings of about 20-25 mm (3/4 to 1 inch). You can use a standard mouse to do this.

2. Choose a free-hand tool in your application and use the pen to draw a dot at each grid intersection.

3. Draw an X at each grid intersection.

4. Clear your screen and make a simple drawing of your own. The more you use your pen, the easier writing, drawing, and navigation will become.

CUSTOMIZING PEN INPUT

You can easily customize the pen. Use the pen to open the tablet control panel. Then select the PEN tab to choose from the available options.

Opening the control panel Control panel overview Customize your pen experience

Contents Index

Contents

Index

CUSTOMIZING YOUR TABLET

Use the tablet control panel to customize your tablet for the way you like work.

Opening the control panel Control panel overview Customize your pen experience Working with Display Toggle Button functions

OPENING THE CONTROL PANEL

To open the control panel:

•Windows 8: Windows 8 Classic Desktop, press the Windows key on your keyboard, or select the Windows icon in the Charms bar, to access the Start screen.

• Windows 7, Vista and XP W

ACOM and the WACOM PREFERENCES option.

•Mac

. Open SYSTEM PREFERENCES from the Apple menu, or from the APPLICATIONS folder. Then click on

the W

From the Windows 8 Start screen, click the WACOM PREFERENCES tile. If you are using the

. Click on the Windows START button and choose ALL PROGRAMS. Then select

ACOM TABLET icon.

You can begin customizing your tablet after opening the control panel. The control panel displays only those tabs and options that apply to your tablet model and configuration. See control panel overview

Note: User-specific preferences are supported. After logging on, each user can customize their personal

settings in the tablet control panel. Switching to another user will automatically load the settings for that user.

Contents Index

Contents

Customizable settings are found on each tab.

The tabs that apply to your tablet model and configuration are displayed when you open the control panel.

Displays information about the control panel and driver.

Downloads or displays the manual.

Resets the selected tab to its default settings.

Closes the control panel.

Index

CONTROL PANEL OVERVIEW

After opening the control panel, you can begin customizing the tablet.

Experiment with different settings to find what works best for you. Any changes you make will take effect immediately. Click D

Tool Tips are available for most control panel items. Position the screen cursor over an item and let it rest there. The appropriate Tool Tip will pop up in a few moments.

Your keyboard tab and arrow keys can also be used to navigate the control panel. The following sections provide detailed information about each control panel tab and some of the more

advanced concepts. Many of the sections also contain useful customizing tips.

Customize your pen experience Button functions

EFAULT to return a tab to the factory settings.

Contents Index

Contents

Setting the pen button functions

Setting the tip and eraser feel, and double-click distance

Setting the tablet mapping

Index

CUSTOMIZE YOUR PEN EXPERIENCE

You can easily customize the pen. Use the pen to open the tablet control panel. You can then customize your tablet for the way you like to interact with your tablet and computer when using the pen or eraser (when equipped).

Note: If you have more than one pen (for example, a standard pen and a premium pen), any changes you

make to the pen settings will apply to both pens.

Contents Index

Contents

When checked, an audible “click” sound will be heard whenever a pen click occurs and your computer speakers are turned on.

Adjusts the size of the double-click area and the double-click speed. A larger setting makes double-clicking easier.

Customizes the amount of pressure needed to click, draw, or ink.

Tips

Use a soft T

IP FEEL to reach the full pressure range with a lighter touch.

In some applications a soft pressure setting can make the pen overreact, causing any small press on the pen to be magnified on the screen. If you experience this, try a firmer T

IP FEEL setting.

To make double-clicking easier, expand the tap area that accepts a double-click (the double-click distance). A large double-click distance may cause a delay at the beginning of brush strokes in some drawing

applications. This may also cause a delay at the beginning of a drag action or inking stroke. If you notice such effects, try setting a smaller double-click distance and using a pen button set to double-click (see setting the

pen button functions).

Index

SETTING THE TIP AND ERASER FEEL, AND DOUBLE-CLICK DISTANCE

Select the PEN tab. To create broad brush strokes or to click with a light touch, use a soft tip setting. For maximum control while drawing thin lines, use a firm tip setting. To erase with a broad stroke or to click with a light touch, use a soft eraser setting (when equipped with eraser). For maximum control while erasing, use a firm eraser setting.

Contents Index

Contents

Select the function to perform when pressing the upper or lower pen button.

The selected function occurs when you bring the pen tip within 7 mm (0.28 inch) of the tablet surface without touching the tablet and then press the upper or lower pen button.

Tip:

To make double-clicking easier, set a

pen button to double-click automatically by selecting D

OUBLE

LICK.

•Choose H

OVER CLICK to perform click functions without

touching the pen tip to the tablet surface.

•Choose C

LICK & TAP to enable the precise placement of

click functions. When selected, you must first press the pen button and then touch the pen tip to the tablet surface in order to perform the click function.

Hover click

Click tap

You can change the SIDE SWITCH MODE to best fit the way you like to use the pen when making right-clicks or other click functions. Click the A

DVANCED button.

SETTING THE PEN BUTTON FUNCTIONS

Select the PEN tab. Each pen button can be set to simulate a variety of mouse functions.

Index

Contents Index

Contents

TRACKING options control how the screen cursor moves:

•P

EN MODE sets the cursor movement to

correspond with the position of your pen on the tablet. Wherever you place your pen on the tablet, the cursor will jump to a corresponding point on the screen. This is known as absolute positioning, and is the default setting for the pen.

Click M

APPING... to customize the tablet

mapping.

•M

OUSE MODE enables you to move the

screen cursor with a “pick up and slide” motion similar to using a standard mouse.

Click D

ETAILS... to set the pen speed in

mouse mode.

Note: If you frequently switch between pen mode and mouse mode,

you can assign the M

ODE TOGGLE... function to one of your pen

buttons.

Index

SETTING THE TABLET MAPPING

Select the PEN tab. The tablet TRACKING options enable you to define the relationship between pen movement on the tablet surface and cursor movement on the monitor screen.

By default the entire active area of the tablet maps to the entire monitor. If more than one monitor is in use the tablet will map to all monitors. See working with multiple monitors

Contents Index

Contents

Use the SCREEN AREA options to select a screen area for tablet to screen mapping.

•A

LL SCREENS. The entire monitor(s) area is

mapped. This is the default setting. See working with multiple monitors

•M

ONITOR. The entire area of a single monitor

that you choose is mapped.

•P

ORTION. A portion of the desktop area is

mapped. Click S

ET... to define the portion of

screen area.

Use the T

ABLET AREA options to select a tablet

area for tablet to screen mapping.

•F

ULL. The entire active area of the tablet is

mapped. This is the default setting.

•P

ORTION. A portion of the tablet area is

mapped. Click S

ET... to define the portion of

tablet area.

Note: Although the tablet is optimized for use

with 16 : 10 aspect ratio displays, the default settings automatically adjust for use with other aspect ratio displays.

Returns settings to their factory defaults.

When FORCE PROPORTIONS is unchecked, the correct scale or proportions are not maintained. The selected tablet area is mapped to the selected display area. Drawing a circle on the tablet may create an ellipse on the display screen. This is the default setting.

When F

ORCE PROPORTIONS is

checked, the correct vertical and horizontal proportions are maintained. Drawing a circle on the tablet results in a circle on the display screen. Depending on your settings, some portions of the tablet active area may no longer be usable when this option is selected.

Index

In the tablet control panel P

ETAILS dialog box.

EN tab, click on the PEN MODE MAPPING... button to display the PEN MODE

Contents Index

Contents

In the dialog that appears, choose a method for defining a portion of the display.

• Drag corners of the foreground graphic to select the screen area.

• Select the C

LICK TO DEFINE SCREEN AREA button and move the screen

cursor to select the screen area. Be sure to follow any M

ESSAGE

prompts.

After defining a portion of the screen, you may need to use a different input device to access other portions of the screen area.

In the dialog that appears, choose a method for defining a portion of the tablet:

• Drag corners of the foreground graphic to select the tablet area that will be mapped to your selected screen area.

• Select the C

LICK TO DEFINE TABLET AREA button and use your pen on

the tablet to select the tablet area. Be sure to follow any M

ESSAGE

prompts.

Index

PORTION OF SCREEN AREA

To define which portion of the display screen your tablet will map to, click on the PEN tab PEN MODE M

APPING... button to display the PEN MODE DETAILS box. Choose SCREEN AREA PORTION and click SET....

PORTION OF TABLET AREA

To define the tablet area that will be mapped to the screen area, click on the PEN tab PEN MODE MAPPING... button to display the P

EN MODE DETAILS box. Choose TABLET AREA PORTION and click SET....

Contents Index

Contents

Sets the screen cursor acceleration when in mouse mode.

Sets the screen cursor tracking speed when in mouse mode.

Notes:

The dialog box will also appear when you set a button to M

ODE TOGGLE.... Only one acceleration and speed

setting can be made. The mouse mode acceleration and speed settings are independent of system settings. Changes you make to

these settings in the tablet control panel do not affect similar system settings. However, changes made to similar system settings may affect your tablet settings.

Index

SETTING THE PEN SPEED IN MOUSE MODE

To change the screen cursor acceleration and speed when using the pen in mouse mode, click on the PEN tab M

OUSE MODE DETAILS... button. A dialog box will be displayed where you can make your adjustments.

Contents Index

Contents

Index

CUSTOMIZING TABLET ORIENTATION

Choose the TABLET tab to set the tablet orientation.

ORIENTATION: Change how your tablet is oriented by selecting R H

ANDED input. The tablet driver automatically

configures all aspects of the tablet for the selected option. Next, physically rotate the tablet to match your selection.

Note: At the system log on and user switching

screens, the tablet will use the default orientation that was selected when the driver was installed. If you want to change the default orientation, you must reinstall the driver. See configuring tablet

orientation.

IGHT HANDED or LEFT

Contents Index

Contents

The entire display area of a multi-monitor system is set up for extended mode and assigned to the active area of the tablet.

All monitors are selected in the toggle sequence.

• The base mapping is the tablet and display mapping defined in the P

EN MODE DETAILS dialog. By default, this

includes all monitors unless you have defined a specific monitor as your primary monitor.

• As you toggle to the next monitor, the active tablet area is mapped to that monitor (in pen mode).

• Toggling one more time after the last selected monitor returns the system to the base mapping.

Any of the following actions will return the toggle sequence to the base mapping:

• Launching a graphics application that supports pressure sensitivity.

• Logging out of or rebooting the system.

• Switching users (Fast User Switching).

• Placing the system in sleep mode.

• Changing the P

EN MODE DETAILS settings.

• Changing the resolution or number of displays on your system.

•Using the M

ODE TOGGLE... function.

Index

WORKING WITH DISPLAY TOGGLE

Display Toggle is available when working on multiple monitor systems. This feature allows you to work with your tablet on all displays or on one display at a time. See working with multiple monitors

Contents Index

Contents

Customize your tablet for the way you like to work. Simply use the tablet control panel to change the button function that is assigned to a pen button, Button function options may vary, depending on your tablet model.

BUTTON FUNCTIONS

Index

FUNCTION DESCRIPTION C

LICKS

•CLICK Simulates a primary mouse button click. Default setting for the pen tip.

IGHT CLICK Simulates a right mouse button click, which displays a context menu.

•R

•M

IDDLE CLICK Simulates a middle mouse button click.

•D

OUBLE CLICK Simulates a double-click. For easier double-clicking, use this function

instead of tapping twice with the pen tip.

•C

LICK LOCK Simulates holding down the primary mouse button. Press the tool

button once to initiate click lock. Press the button again to release click lock. Click lock is useful for dragging objects or selecting blocks of text.

TH CLICK Simulates a 4th mouse button click.

•4

•5

TH CLICK Simulates a 5th mouse button click.

ACK Simulates the BACK command in browser applications.

B F

ORWARD Simulates the FORWARD command in browser applications.

RASE Pen only. Sets a button so that when the button is pressed, the pen tip

will act like the eraser (when equipped) in applications that support the E

RASE function. See erasing.

Contents Index

Contents

Clears the keystroke entry box.

Deletes only the last entry in the keystroke entry box.

Choose one or more modifier key options. Choose a C

LICKS option to simulate

pressing a button of the selected type on a mouse.

Index

FUNCTION DESCRIPTION K

EYSTROKE... Enables you to simulate keystrokes. Select this option to display the

EFINE KEYSTROKE dialog box.

D Enter a keystroke or keystroke combination in the K

EYS entry box.

Keystroke combinations can include letters, numbers, function keys (such as F3) and modifier keys (such as S Windows, or

SHIFT, OPTION, COMMAND, and CONTROL for Mac). You can

HIFT, ALT, or CTRL for

also choose special keystrokes or keystroke combinations from the

DD SPECIAL pull-down menu.

A After defining a keystroke or keystroke sequence, click OK.

Important: Because the E

NTER (Windows) and RETURN (Mac)

keys can be selected as a defined keystroke, they cannot be used to select OK. You must use your pen to click on the OK button.

Enter a name for the keystroke definition. The name will be displayed with the respective control.

ODIFIER... Enables you to simulate modifier key(s) (such as SHIFT, ALT, or CTRL for

To learn which keystroke shortcuts are supported by a particular application, see the documentation that came with the application.

Windows, or

SHIFT, OPTION, COMMAND, and CONTROL for Mac). Many

applications use modifier keys to constrain the size or placement of objects.

Contents Index

Contents

When you select PAN/SCROLL, you are prompted to set a scrolling speed for use in applications that do not support grabber hand (pixellevel) panning.

A slower setting reduces the scroll rate and is useful for close-up and detail work where you need precise control of the image.

As you move the pen tip, the document or image is repositioned to follow the direction of pen movement on the tablet.

Release the button or lift the pen tip from the tablet surface when you are done.

Index

FUNCTION DESCRIPTION P

AN/SCROLL Pen only. Enables you to position a document or image in any direction

within the active pane. Do this by pressing a pen button set for P S

CROLL and then dragging with the pen tip across the tablet active

AN/

area.

ACOM PREFERENCES Opens the tablet control panel.

W S

HOW DESKTOP Minimizes all open windows to display a clean desktop.

ISPLAY TOGGLE For multiple monitor systems. Enables you to toggle the current tablet

SWITCH APPLICATIONS Brings up the application switching dialog with focus on the next open

mapping and screen cursor between different displays. See Working

with multiple monitors.

application. On Windows 8, Windows 7 or Vista systems running Aero, Flip 3D will be activated with focus on the next open application.

Contents Index

FUNCTION DESCRIPTION

Click BROWSE... to locate an application, file, or script to launch. Your selection appears in the A

PPLICATION TO RUN box.

Click OK to accept the selection.

The dialog box will close and the O

PEN/RUN... option you have selected will be

assigned as your tool button option. Press the tool button to launch the assigned option.

If your selection is for the Pop-up Menu, it will be displayed in the Pop-up Menu list.

PEN/RUN... Opens the RUN APPLICATION dialog box.

NK TOGGLE (Mac.) Toggles the “ink in any application” function of Ink on and off. Ink

ABLET PC

ABLET PC INPUT PANEL (Tablet PCs and Windows systems that support the Tablet PC Input

•T

OURNAL (Windows 8, Windows 7 and Vista, and Tablet PC systems that include

•J

ABLET PC DEFINED (Tablet PCs and Windows systems that support the Tablet PC Input

•T

XPOSÉ (Mac.) Tiles all open windows. To access this option, first choose

RESSURE HOLD Locks the pressure at the current pressure level until the button is

ODE TOGGLE... Toggles pen input between pen mode and mouse mode. See setting

ISABLED Disables the button function.

EFAULT Returns a button to its default setting.

Contents

Index

automatically recognizes and converts your handwriting into text and inserts it into a document. Handwriting recognition must be turned on for this function to work. See your Mac help for information on working with Ink.

Panel.) Opens the Tablet PC Input Panel when you press a tool button set to this function.

Microsoft Journal.) Opens Microsoft Journal.

Panel.) Sets the button function according to settings found in the:

• Windows 8, Windows 7 and Vista T

NPUT DEVICES control panels.

• Windows XP Tablet Edition T

EYSTROKE... and then click on the ADD SPECIAL menu within the dialog

ABLET AND PEN SETTINGS control panel.

ABLET PC SETTINGS and PEN AND

box.

released. For example, you can paint with pressure sensitivity until you reach the brush size that you like. You can then press the button and continue painting with the same size brush until the button is released.

the pen speed in mouse mode.

Contents Index

Contents

Index

TESTING YOUR TABLET

1. Turn on your computer and wait until the system has fully loaded.

2. Check the USB connection. The tablet status LED should glow whenever the tablet is properly connected and your computer has registered it as a USB device. If not:

• Make sure the tablet USB cable is securely connected to an active USB port on your computer.

• Check the tablet USB cable for damage.

• If you are connecting the tablet to a USB hub (or hub device such as a keyboard with USB ports), be

sure the USB hub is properly connected to your computer and is active.

• If the status LED does not illuminate after your computer is on and has finished booting up, your

USB port may be disabled. Verify that you have connected the tablet to an active USB port.

• Connect the tablet to a different USB port or try connecting to the USB port on another computer.

3. Check pen input:

• Check pen input

have a pen-only tablet model, you will be able to use the pen tip to move the screen cursor and click. You will also be able to use the pen buttons to C other pen functionality.) Install the tablet driver software. See also te sting a p en

. If the tablet driver does not load properly, pen input will not be available. (If you

LICK and RIGHT CLICK, but there will be no

4. If any of these tests fail you may have defective hardware. See technical support options

After testing, use the tablet control panel to reconfigure your tablet for any custom settings you may originally have been using.

TESTING A PEN

1. First perform the procedures for testing your tablet.

2. Check the pen by opening the tablet control panel and selecting the P button to return the pen to its default settings. Next:

• Touch the pen tip and then the eraser (when equipped) to the tablet active area. Each time the tip or

eraser makes contact with the tablet surface, the status LED should brighten.

• Without applying pressure to the pen tip, hold the pen tip within approximately 7 mm (0.28 inch) of

the tablet surface and press each pen button in turn. For each button press, the status LED should brighten.

• While still within proximity, but without touching the tablet surface, move your pen across the active

area of the tablet. The screen cursor should move in the corresponding direction on your monitor or display screen.

3. If any of these tests fail you may have defective hardware. See technical support options

4. After testing, use the control panel to reconfigure your tablet and pen for any custom settings you may originally have been using.

EN tab. Click on the DEFAULT

Contents Index

Contents

Index

TROUBLESHOOTING

If you encounter problems with your tablet or pen, see the following tables. Your problem may be described here, and you can try the solution offered.

For additional information, visit the Wacom website at http://www.wacom.com.

General problems Pen input problems Windows-specific problems Mac-specific problems

GENERAL PROBLEMS

The computer does not have an available USB port.

The tablet status LED does not illuminate.

The computer does not go to sleep.

The screen cursor is very erratic or jumps around when using the tablet.

The tablet is set for R

ANDED (or LEFT HANDED), but

IGHT

at the log on screen the tablet seems to work upside down.

PEN INPUT PROBLEMS

The pen does not position the screen cursor, or otherwise does not work.

The pen does not draw or ink with pressure sensitivity.

Check if there is an available USB port on a USB hub. If not available you will need to add a USB hub or USB card.

Verify that your tablet USB cable is properly connected to an active USB port. If you are connecting to a USB hub, make sure the hub is connected to an active USB port and that the hub is active.

When you are not using the pen, remove it from the tablet surface or the tablet will continue to send data, keeping the computer awake.

Note: Because some metallic or other conducting objects can also

cause the tablet to send data, it is best to keep the tablet surface clear of all objects when not in use.

On rare occasions the tablet may receive interfering radio frequencies from a computer monitor or nearby AM radio station. If you notice interference from a monitor, try moving the tablet at least six (6) inches away from the monitor, or change the monitor refresh rate or monitor resolution.

Reinstall the tablet driver software and change the default orientation of the tablet. See configuring tablet orientation.

If the tablet driver does not load properly, pen input will not be available.

You will be able to use the pen tip to move the screen cursor and click. You will also be able to use the pen buttons to C R

IGHT CLICK (upper button), but there will be no other pen functionality.

LICK (lower button) and

Install the driver software for the tablet. Some applications require that you turn on the pressure capabilities

within the application or selected tool before the pen will respond as a pressure-sensitive tool.

Verify also that your application supports pressure sensitivity.

Contents Index

Contents

Index

Clicking is difficult. Open the tablet control panel and go to the P

IP FEEL.

Select the C

LICK SOUND option (the check box should be checked). This

EN tab. Try using a lighter

will enable you to hear when the pen registers a mouse click. Your computer speakers must be turned on and the volume audible before you can hear a click sound.

Double-clicking is difficult. Be sure you are quickly tapping the tablet twice in the same place on

the tablet active area. Using a pen button set to double-click is recommended (review the

The pen selects everything, or will not stop selecting.

The eraser (when equipped) selects everything or will not

techniques in clicking Open the tablet control panel and go to the P

• Try increasing the D

• Try using a lighter T Windows

: Try setting your system to launch programs with a single

click. See clicking Open the tablet control panel and go to the P

slider toward F

IRM. If this does not help, see tes tin g a p en .

Open the tablet control panel and go to the P

EEL slider toward FIRM. If this does not help, see test ing a p en .

EN tab.

OUBLE CLICK DISTANCE.

IP FEEL.

EN tab. Move the TIP FEEL

EN tab. Move the ERASER

stop erasing. You notice a screen delay at

the beginning of pen or inking

Open the tablet control panel and go to the P

OUBLE CLICK DISTANCE.

EN tab. Try decreasing the

strokes. You have to press hard with

the pen when clicking,

Open the tablet control panel and go to the P slider toward S

OFT.

EN tab. Move the TIP FEEL

drawing, or writing. The pen tip does not function. Depending on your tablet model, the status LED should brighten or

change color when the pen tip is pressed to the tablet. Be sure you are using the pen that originally came with your product. Other pens may not function properly on the tablet.

See test ing a p en

to verify pen operation. If any of the tests fail you may

have defective hardware.

The screen cursor jumps back.

Do not place the pen on the tablet when it is not in use or when you are using another pointing device. Leaving your pen on the tablet may interfere with screen cursor positioning when using other input devices.

The upper or lower pen button does not work.

Be sure you press the pen button when the pen tip is within 7 mm (0.28 inch) of the tablet active area. Do this without pressing down on the pen tip.

From the tablet control panel, verify that the pen button is set to the function you are expecting to occur.

In the tablet control panel, click on the P

LICK & TAP is selected, you will need to first press the pen button and

EN tab ADVANCED button. If

then touch the pen tip to the tablet surface in order to perform a click function. See setting the pen button functions

See test ing a p en

to verify pen operation. If any of the tests fail you may

have defective hardware.

Contents Index

Contents

Index

Cannot move the cursor where you want to on the screen, or the line you are drawing does not line up with the location of the pointer in

Open the tablet control panel. Verify that PEN MODE is selected. If this does not help, click on the D tablet to screen mapping. If you are still having difficulty, remove the tablet preferences (see Windows-specific problems

problems for details).

paint applications.

WINDOWS-SPECIFIC PROBLEMS

You suspect the tablet preferences may be corrupted, or want to make certain that all settings are at their factory defaults.

Use the Wacom Tablet Preference File Utility to work with preferences. Close any open applications. Windows 8:

REFERENCE FILE UTILITY tile. If you are using the Windows 8 Classic

Desktop, press the Windows key on your keyboard, or select the Windows icon in the Charms bar, to access the Start screen.

Windows 7, Vista and XP W

ACOM TABLET, then WACOM TABLET PREFERENCE FILE UTILITY.

• It is a good idea to first back up your tablet preferences. In the W

ACOM TABLET PREFERENCE FILE UTILITY dialog box, click BACKUP...

and follow the prompts.

• Then, use the Wacom Tablet Preference File Utility to delete the tablet preferences as follows:

Single user preferences for the current user.

Multiple users delete preferences for multiple users. Administrator rights are required to delete preferences for all users. Relaunch any currently open tablet-aware applications that you may be running.

EFAULT button to reestablish the default

or Mac-specific

From the Windows 8 Start screen, click the WACOM TABLET

: Click START and select ALL PROGRAMS. Select

. Under MY PREFERENCES, click REMOVE to delete the

. Under ALL USER PREFERENCES, click REMOVE to

You can quickly restore tablet preferences that have been backed up by clicking R

MAC-SPECIFIC PROBLEMS

At startup, a dialog box appears telling you that either the driver failed to load or the tablet preferences have not yet been created.

The tablet was not detected at startup. If connected with the provided USB cable

• Make sure the USB cable is securely connected to an active USB

•From the G

If you are still having difficulties, uninstall then reinstall the tablet driver software.

If this does not help, contact Wacom for Technical Support. See technical support options

ESTORE... under MY PREFERENCES.

port on your computer or USB hub. Make sure that the tablet status LED is illuminated.

O menu, select UTILITIES and launch the SYSTEM

ROFILER. Select USB from the HARDWARE section of the CONTENTS

P list. A Wacom USB tablet model should be listed. If a tablet model is not listed, check the USB tablet cable connection or try plugging the tablet into a different USB port.

Contents Index

Contents

Index

You suspect the tablet preferences may be corrupted, or want to make certain that all settings are at their factory defaults.

Ink does not work correctly with the tablet.

Use the Wacom Tablet Utility to work with preferences. Close any open applications. Open the main A

ACOM TABLET folder and run the WACOM TABLET UTILITY.

PPLICATIONS folder. Then open the

• It is a good idea to first back up your tablet preferences. In the tablet Utility, select C B

ACKUP... and follow the prompts.

URRENT USER or ALL USERS. Then click

• Then, delete the tablet preferences as follows: Single user

EMOVE. Log out, then log back in. When the tablet driver loads it

. When the utility starts, select CURRENT USER and click

will create a new preferences file with the factory defaults. Multiple users

EMOVE. Log out, then log back in. When the tablet driver loads it

. When the utility starts, select ALL USERS and click

will create new preferences files with the factory defaults.

You can quickly restore tablet preferences that have been backed up for the C

URRENT USER or ALL USERS by clicking on RESTORE... within the

utility. Note: Do not manually remove the W

the main L

IBRARY PREFERENCEPANES folder. This file is only to be

ACOM TABLET.PREFPANE file from

removed when uninstalling the tablet software driver, and then only when using the W

ACOM TABLET UTILITY.

There may be a problem with the Ink preferences. Remove the damaged preference files as follows. They will be re-created when you enable handwriting recognition.

1. Open S

YSTEM PREFERENCES, choose SHOW ALL and select INK. Then

turn off handwriting recognition.

2. From the G

REFERENCES folders. Remove the following preferences:

•

COM.APPLE.INK.FRAMEWORK.PLIST

O menu, choose your HOME. Open the LIBRARY and

• COM.APPLE.INK.INKPAD.PLIST

• COM.APPLE.INK.INKPAD.SKETCH

Contents Index

3. Go back to SYSTEM PREFERENCES and INK, and then enable handwriting recognition.

4. Test the Ink function using your tablet and pen.

If this procedure does not resolve your problem with Ink, contact Apple Support for further assistance. Wacom is not the software manufacturer for Ink and we are limited in our abilities to support a third party software application.

Contents

Index

TECHNICAL SUPPORT OPTIONS

If you have a problem with your tablet, first check the tablet Quick Start Guide to be sure the unit is installed correctly. Then review the Troubleshooting

If you cannot find the answer in this manual, you can check the product FAQs (Frequently Asked Questions) on the Wacom Support website for your region.

Wacom periodically updates the tablet software driver to maintain compatibility with new products. If you are having a compatibility problem between the tablet and a new hardware or software product, it may be helpful to download a new software driver (when available) from the Wacom Support website for your region.

If you cannot solve the problem and you think your tablet is not working properly, contact the Wacom support staff for the area where your product was purchased.

When you call, you should be at your computer with the following information available:

• This manual.

• Tablet serial and model number. (Look on the bottom of the tablet.)

• Driver version number. (See the tablet Installation CD or click on the tablet control panel A button.)

• The make and model of your computer, and operating system version number.

• A list of peripheral devices attached to your computer.

• The software application and version you were using when the problem occurred.

• The exact wording of any error message that appeared on your screen.

• What happened and what you were doing when the problem occurred.

• How you tried to solve the problem.

and procedures.

BOUT

You can also contact Wacom Support by visiting the Wacom website for your region and completing an Email Inquiry form.

Contents Index

Contents

Index

OBTAINING DRIVER DOWNLOADS

PRODUCT INFORMATION

To learn more about your tablet, visit the Wacom website for your region. You can also discover which software applications are currently tablet enhanced to support the pressure sensitivity and other special functionality of your tablet by checking the software applications

Specifications for your tablet are provided in the Important Product Information document included on your product CD.

USA, Canada, Central and South America https://store.wacom.com/us Europe, Middle East and Africa www.wacom.eu Japan www.tablet.wacom.co.jp Asia Pacific (English) www.wacom.asia China (Simplified Chinese) www.wacom.com.cn Korea www.wacom.asia/kr Taiwan www.wacom.asia/tw Thailand www.wacom.asia/th

ORDERING PARTS AND ACCESSORIES

For information on purchasing parts and accessories, refer to the website for your region. You can also do the following:

• In the U.S. or Canada http://direct.wacom.com.

•In Europe http://shop.wacom.eu. You can also contact your local dealer, distributor, or technical support using the appropriate number for your region.

•In Japan support using the appropriate number for your region.

• In Australia, Singapore, Taiwan and Korea www.BuyWacom.com.sg, www.BuyWacom.com.tw and www.BuyWacom.co.kr, respectively.

• In other countries

Some parts and accessories may not be available in all regions.

, call +49 (0)180.500.03.75 or send an email to spareparts@wacom.eu. Or visit

, visit http://store.wacom.jp. You may also contact your local dealer, distributor, or technical

, call 1.888.884.1870 (toll-free). In the U.S., you may also visit Wacom’s website at

, please visit: www.BuyWacom.com.au,

, please contact your local dealer or distributor.

Contents Index

Contents

Index

APPENDIX

This section contains tips on caring for your tablet, instructions on how to uninstall the tablet software, information about digital inking, and more.

Caring for Your tablet Replacing the pen nib Uninstalling Managing preferences Pen and digital ink capabilities in Windows Product information Ordering parts and accessories Available accessories

CARING FOR YOUR TABLET

Keep your tablet surface and pen clean. Dust and dirt particles can stick to the pen and cause excessive wear to the tablet surface. Regular cleaning with a soft, damp cloth will help to prolong the life of your tablet surface and pen. You can also dampen the cloth using a very mild soap diluted with water. Do not use volatile liquids, such as paint thinner or benzene, as they may damage the plastic case.

Keep the tablet in a clean, dry place and avoid extremes in temperature. Room temperature is best. Also, your tablet and pen are not made to come apart. Twisting the pen case can break the pen. Taking apart the product will void your warranty.

Important: Take care to never spill liquids onto the tablet or pen. Be especially careful not to get the tablet, pen buttons, tip, and eraser wet. They contain sensitive electronic parts that will fail if liquid enters them.

Contents Index

Contents

Nib Replace when 1 mm

(0.4 inch) or less.

Index

REPLACING THE PEN NIB

The pen nib (tip) will wear with normal use. Excessive pressure will cause it to wear sooner. Replace the nib when it gets too short or develops a flat point.

1. Clasp the old nib and pull it straight out of the pen. Use the nib removal tool, pair of tweezers, needlenosed pliers, or similar instrument.

2. Slide the end of the new nib straight into the barrel of the pen. Firmly push the nib until it stops.

Warning: Choking hazard. Prevent children from swallowing the pen nib or button part. The

pen nib or button part may accidentally be pulled out if children are biting on them.

For replacement parts, see ordering parts and accessories

Important: When not in use, place the pen in the pen holder or lay it flat on your desk. When equipped, the eraser end of the pen should be inserted first into the loop. To maintain the sensitivity of your pen, do not store the pen in a container where it will rest on the tip or eraser.

Contents Index

Contents

Index

UNINSTALLING

Follow the appropriate procedure below to remove the tablet driver software from your system.

Important: When you remove the tablet software, your tablet will no longer operate with full tablet functionality but will continue to function as a mouse device.

Windows 8: the task bar. If you are using the Windows 8 Classic Desktop, press the Windows key on your keyboard, or select the Windows icon in the Charms bar, to access the Start screen.

Windows 7 and Vista P

ANEL window click on UNINSTALL A PROGRAM. In the dialog box that appears, choose WACOM TABLET and

click U on name and password. Restart your computer after uninstalling the software.

Windows XP window select A

ABLET and click REMOVE. Follow the prompts to remove the tablet driver. Restart your computer after

T uninstalling the software.

Mac

: From the GO menu, choose APPLICATIONS and open the WACOM TABLET folder. Double-click on the

ACOM UTILITY icon and select the TABLET SOFTWARE: REMOVE button. Enter your administrator login name

and password. After the removal is completed, click OK. Restart your computer after uninstalling the software.

From the Windows 8 Start screen, click the WACOM PREFERENCES tile, and click Uninstall from

: Click on the Windows START button and open the CONTROL PANEL. In the CONTROL

NINSTALL. Follow the prompts to remove the tablet driver. If prompted, enter your administrator log

: Click on the Windows START button and open the CONTROL PANEL. In the CONTROL PANEL

DD OR REMOVE PROGRAMS. In the ADD OR REMOVE PROGRAMS window, choose WACOM

Contents Index

Contents

Index

MANAGING PREFERENCES

Use the preference file utility to manage your tablet preferences for single or multiple users. Close any open applications. Windows 8:

using the Windows 8 Classic Desktop, press the Windows key on your keyboard, or select the Windows icon in the Charms bar, to access the Start screen.

Windows 7

ACOM PREFERENCE FILE UTILITY.

• To remove preferences for the current user, click R

• To delete preferences for multiple users, click R rights are required to delete preferences for all users. Relaunch any currently open tablet-aware applications that you may be running.

• To back up your preferences, click B

• To restore preferences that you had previously backed up, click R

• Carefully follow any prompts that may appear.

Mac

: Open the main APPLICATIONS folder. Then open the WACOM folder and run the WACOM UTILITY.

• To remove preferences, select C in. When the tablet driver loads it will create a new preferences file with the factory defaults.

• To back up your preferences, select C

• To restore preferences that you had previously backed up, select C click R

• Carefully follow any prompts that may appear.

From the Windows 8 Start screen, click the WACOM PREFERENCE FILE UTILITY tile. If you are

: Open the utility by clicking the START icon and selecting ALL PROGRAMS. Select WACOM and

EMOVE under MY PREFERENCES.

EMOVE under ALL USER PREFERENCES. Administrator

ACKUP... under MY PREFERENCES.

ESTORE... under MY PREFERENCES.

URRENT USER or ALL USERS. Then click REMOVE. Log out, then log back

URRENT USER or ALL USERS. Then click BACKUP....

URRENT USER or ALL USERS. Then

ESTORE....

Contents Index

Contents

Index

PEN AND DIGITAL INK CAPABILITIES IN WINDOWS

Microsoft Windows 8, Windows 7 and Vista provide extensive support for pen input. Pen features are supported in all versions of Windows 7 and Vista except Windows 7 Starter and Home Basic, and Windows Vista Home Basic. Use your tablet and pen for quick, intuitive results.

•Note taking to locate your handwritten content.

• Handwriting recognition input. Convert your handwritten content to typed text at any time.

•Gestures gestures, select the F

EVICES control panel.

• Digital Ink in Microsoft Office 2007

EVIEW tab within applicable applications.

The Windows 8, Windows 7 or Vista Input Panel enables you to use handwriting or an on-screen keyboard to directly enter text with your pen.

There are different ways to launch the Input Panel

• Click on the Input Panel icon which appears when you move the screen cursor into a text entry area.

• Click on the Input Panel tab, located by default on the left edge of the display screen.

• Click on the Tablet PC Input Panel icon located on the Windows Taskbar. If the icon is not visible, rightclick on the Taskbar, select T

. Jot notes and capture quick sketches in Windows Journal. Use the Journal search engine

. Quickly enter handwritten information anywhere the computer accepts typed

. Make simple gestural movements on the tablet to trigger customizable actions. To customize

LICKS tab in the Windows 7 PEN AND TOUCH or Windows Vista PEN AND INPUT

. Utilize the enhanced digital mark-up and inking tools found on the

OOLBARS, and TABLET PC INPUT PANEL.

To disable the Input Panel

1. Open the Tablet PC Input Panel.

2. Select T

3. Choose the O

•F

OOLS and OPTIONS.

PENING tab and uncheck the following boxes:

OR TABLET PEN INPUT, SHOW THE ICON NEXT TO THE TEXT BOX

•SHOW THE INPUT PANEL TAB.

4. Click OK.

Note: The following workarounds in the software driver improve performance in Windows 8, Windows 7

and Vista:

• To improve performance, the Pen Flicks and ‘press-and-hold-to-right-click’ features are disabled in some graphics applications such as Photoshop.

• There is no pressure sensitivity in Journal and other Ink features when both the Flicks and ‘press-and-hold-to-right-click’ features are disabled in the Windows 8, Windows 7 P

OUCH, or Windows Vista PEN AND INPUT DEVICES control panel.

EN AND

Contents Index

Contents

Index

PRODUCT INFORMATION

USA, Canada, Central and South America http://www.wacom.com Europe, Middle East and Africa http://www.wacom.eu Japan http://tablet.wacom.co.jp Asia Pacific (English) http://www.wacom.asia China (Simplified Chinese) http://www.wacom.com.cn Hong Kong (Traditional Chinese) http://www.wacom.com.hk Korea http://www.wacom.asia/kr Taiwan http://www.wacom.asia/tw Thailand http://www.wacom.asia/th

Contents Index

Contents

Index

ORDERING PARTS AND ACCESSORIES

To p ur ch ase available accessories, see the Wacom website for your region. You can also do the following:

• In the USA or Canada http://direct.wacom.com (USA only).

•In Europe dealer, distributor, or technical support using the appropriate number for your region.

• In Australia, Singapore, Taiwan and Korea www.BuyWacom.com.sg, www.BuyWacom.com.tw and www.BuyWacom.co.kr, respectively.

• In other countries

Some parts and accessories may not be available in all regions.

, call +49 (0)180.500.03.75 or visit http://shop.wacom.eu. You can also contact your local

AVAILABLE ACCESSORIES

DESCRIPTION PART NUMBER Pen, standard, without eraser LP-170

Pen, premium, with eraser LP-170E Pen nibs, black, qty 5 ACK-204-01K

, call 1.888.884.1870 (toll-free) or visit Wacom’s website at

, please visit: www.BuyWacom.com.au,

, please contact your local dealer or distributor.

Contents Index

Contents

Index

GLOSSARY

Active area. The navigation and drawing area of your tablet where pen input is detected. Aspect Click force Digital Ink

pen-based input on a computer. This handwritten content takes the form of sketches, ink mark-up, or handwriting. The handwriting can optionally be converted to typewritten text or simply left alone for use in its original format. Depending on your system and application settings, the handwritten text you make with digital ink can be converted on-the-fly or at another time.

Display Toggle time. Available only on multiple monitor systems. See Working with Display Toggle

Double-click distance clicks and still be accepted as a double-click. Increasing the double-click distance makes double-clicking easier, but may cause a delay in brush strokes in some applications.

Eraser-aware application applications take advantage of the eraser in different ways, depending on what makes sense for the application.

Journal advantages of digital note taking. For example, you can create quick sketches and jot handwritten notes that can be converted to text and sent on to colleagues for digital mark-up. Journal includes a variety of pen, marker, and highlighter tools, plus an eraser that is easily activated by the eraser of the pen. Additionally, your handwritten content is searchable within Journal.

Mapping screen.

Modifier for Mac.

. The ratio between the vertical and horizontal dimension of the tablet or display.

. The amount of force you must apply to the pen tip for a click to occur.

. A broad category that typically describes handwritten content which has been created using

. A feature that allows you to work with your tablet on all displays or on one display at a

. The maximum distance (in screen pixels) that the screen cursor can move between

. A software application that has built-in support for the pen eraser. These

. A Microsoft Windows application that electronically simulates a physical journal pad, but with the

. The relationship between the pen position on your tablet and the cursor position on the monitor

. Modifier keys include SHIFT, ALT, and CTRL for Windows, or SHIFT, CONTROL, COMMAND, and OPTION

Contents Index

Contents

Index

Mouse acceleration

. A setting that allows you to adjust the screen cursor acceleration when using mouse

mode. Mouse mode

. A method for positioning the screen cursor. When you place the pen on your tablet, you can move the screen cursor with a “pick up and slide” motion similar to using a standard mouse. This is known as relative positioning. See also Pen mode.

Mouse speed. A setting that allows you to adjust the speed at which your screen cursor moves when using mouse mode.

Nib

. The replaceable pen tip. Pairing Pen input Pen mode

. A method of creating a virtual cable link between to devices.

. A method of controlling a computer using the pen on your tablet.

. A pen input method of positioning the screen cursor. Wherever you place the pen on your tablet, the screen cursor will jump to the corresponding point on the screen. This is known as absolute positioning, and is the default setting for the pen. Pen mode allows you to quickly position the screen cursor without having to first find it and then move it across the desktop. See also Mouse mode.

Pixel. The smallest unit of measure on your monitor screen. Pressure sensitive

. A quality of the pen tip and eraser that senses the amount of pressure being applied. This is used to create natural-looking pen, brush, and eraser strokes in applications that are pressure sensitive.

Pressure-sensitive application Proximity

. The height above the tablet where pen detection occurs. See also positioning.

. Any application that supports pressure-sensitive input.

Screen cursor. The pointer on the display screen. Screen cursors come in different shapes (such as an Ibeam, arrow, or box), depending on which application you are running.

Tablet PC Input Panel (TIP)

. The Microsoft Windows Tablet PC Input Panel enables you to use your pen to create handwritten notes or work with an on-screen keyboard. The Input Panel dynamically converts your handwriting to text. The information you create can then be inserted into other documents, spreadsheets, or illustrations.

USB

. Universal Serial Bus. A hardware interface standard for connecting computer peripheral devices. USB ports support hot-plugging, which allows you to connect or disconnect a USB device without turning off your computer.

Wintab

. An interface standard used by Windows applications for receiving tablet information. Your tablet

supports all Wintab-compatible applications under Windows.

Contents Index

Contents

Index

WACOM INTERNATIONAL OFFICES

WACOM TECHNOLOGY CORPORATION WACOM EUROPE GMBH

1311 SE Cardinal Court Europark Fichtenhain A9 Vancouver, WA 98683 47807 Krefeld U.S.A. Germany

Telephone: +1.360.896.9833 Internet: http://www.wacom.eu Fax: +1.360.896.9724

WACOM CO., LTD. JAPAN TABLET SALES DIVISION

Sumitomo Fudosan Shinjuku Grand Tower 31F Sumitomo Fudosan Shinjuku Grand Tower 31F 8-17-1 Nishi-shinjuku, Shinjuku-ku 8-17-1 Nishi-shinjuku, Shinjuku-ku Tokyo, 160-6131 Tokyo, 160-6131 Japan Japan

Internet: http://tablet.wacom.co.jp Telephone: +81.3.5309.1513

WACOM CO., LTD. ASIA PACIFIC DIVISION

Fax: +81.3.5309.1514

WACOM CHINA CORPORATION WACOM KOREA CO., LTD.

1103, Beijing IFC West Tower #1211, 12F KGIT Sangam Center, No. 8 Jianguomenwai Street 1601 Sangam-dong, Mapo-gu, Seoul 121-913, Korea Chaoyang District, Beijing 100022 Telephone: +82.2.557.3894 China Fax: +82.2.557.3895

Internet: http://www.wacom.com.cn

WACOM AUSTRALIA PTY. LTD. WACOM SINGAPORE PTE. LTD.

Unit 8, Stage 1 Cumberland Green 5 Temasek Boulevard 2-8 South Street Rydalmere #12-09 Suntec Tower Five NSW 2116 Australia Singapore 038985

Telephone: +61.2.9422.6700 Telephone: +65.6258.8640 Fax: +61.2.9420.2272 Fax: +65.6258.8697

WACOM TAIWAN INFORMATION CO., LTD. WACOM HONG KONG LIMITED

Suite 605, 6th floor, No. 205 Tun-Hwa North Road Room 1201, Tai Tung Building Taipei, 105 Taiwan 8 Fleming Road

Telephone: +886.2.2712.2675 Wanchai, Hong Kong Fax: +886.2.2712.9789 Telephone: +852.25739322

Contents Index

Fax: +852.25739500

Contents

Index

INDEX

About the manual 4 Accessories and parts

ordering 39 Accessories and parts, ordering 46 Accessories, available 46 Button functions 29 Care, for tablet 40 Click sound 13 Clicking, with pen 13 Control panel

basics 9

opening 18

overview 19 Customizing

button functions 29

double-click distance 21

eraser feel 21

ExpressKeys

functions 27

pen 20

acceleration in mouse mode 26 buttons 22 input 17

speed in mouse mode 26 tablet orientation 27 tip feel 21

Digital inking capabilities 44 Display Toggle, working with 28 Double-click distance, customizing 21 Double-clicking, how to 13 Dragging, with pen 13 Drawing with pressure 15 Driver downloads, obtaining 39 Environmental conditions 40 Eraser feel, customizing 21 Erasing, with pen 16 Ergonomics 7 ExpressKeys

setting functions 27

Eye-hand coordination exercise 17 Features

pen 6 pen holder 6

pen models 5 Functions, button 29 General problems, troubleshooting34 Information, product 39, 45 Mac-specific problems, troubleshooting 36 Manual, about 4 Mapping

tablet 23

to multiple monitors 9 Monitors, working with multiple 9 Nib, replacing 41 Ordering parts and accessories3946 Orientation

configuring for tablet 8

setting for tablet 27 Overview, control panel 19 Parts and accessories

ordering 39 Parts and accessories, ordering 46 Parts, available 46 Pen

buttons

customizing 22

using 14 clicking with 13 customizing 20 double-clicking with 13 dragging with 13 drawing with pressure 15 erasing with 16 features 6 input problems, troubleshooting 34 input, customizing 17 nib, replacing 41 pointing with 12 positioning with 12 speed, setting 26 testing 33 the experience 11 tip, replacing 41 using 11

on tablet 11

pen buttons 14

Contents Index

Contents

Index

writing with pressure 15 Pen holder 6 Pointing, with pen 12 Positioning, with pen 12 Preferences, managing 43 Pressure

drawing with 15

writing with 15 Product

information 45 Product information 39 Proportions and scale 24 Scale and proportions 24 Set up 7 Settings, control panel 19 Software

driver downloads 39

uninstalling 42 Ta bl e t

caring for 40

configuring orientation 8

mapping 23

area 24 for portion of screen area 25 for portion of tablet area 25

to multiple monitors 9 orientation, setting 27 pen model features 5 scale and proportions 24 setting up 7 storing 40 testing 33 tracking 23

Technical support options 38 Te st i ng

pen 33 tablet 33

Tip

customizing feel 21 replacing 41

Tracking, tablet 23 Troubleshooting 34

general problems 34 Mac-specific problems 36 pen input problems 34 Windows-specific problems 36

Uninstalling tablet software 42 Wacom tablet

the pen experience 11

Windows-specific problems, troubleshooting 36 Work area, setting up 7 Writing with pressure 15

Contents Index

Wacom One CTH-671, One CTH-471, CTH-471, CTH-651 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual