VTech VT1010, VT1010T, VT1515, VT1616 User Manual
User’s manual
www.vtech.com
Model: VT1010/VT1010T
VT1515/VT1616
DECT
www.vtech.com
I
Table of contents
Important Safety Instructions .......................................1
Setting up the telephone.................................... 2
Package Contents ........................................................3
Location ........................................................................3
Connecting the telephone ............................................3
Connecting the base station ........................................3
Installing and charging the batteries ............................4
Getting to know your phone .............................. 5
Overview of the handset ..............................................5
Overview of the base station ........................................6
Displays, keys , icons ...................................................7
Using your phone................................................ 9
Make a call ....................................................................9
Preparatory Dialing.......................................................9
Direct Dialing ................................................................9
Call from the phonebook ..............................................9
Call from the calls log ...................................................9
Call from the redial list .................................................9
Call timer .......................................................................9
An
swer a call ..............................................................10
End a call ....................................................................10
Adjust Earpiece and Handsfree Volume ....................10
Mute a call ..................................................................10
Set the Silent Mode ....................................................10
Turn on the Keypad Lock............................................10
Make an internal call
(for VT1010T / VT1515 / VT1616 only) ....11
Intercom Another Handset
(for VT1010T / VT1515 / VT1616 only) .......................11
Call All Handsets
Transfer an External Call to another handset
(for VT1010T / VT1515 / VT1616 only ) ..................... 11
Make a 3 -way Conference Call
(for VT1010T / VT1515 / VT1616 only ) .................... 11
Redial ................................................................. 12
Redial the last number ...............................................12
Redial a number from the Redial list .......................... 12
Store a Redial Number into the Phonebook ..............12
Delete a
Redial Number .............................................12
Delete the Entire Redial List .......................................12
Call List .............................................................. 13
Caller display ( Network Dependent ) ........................14
View the Call List ........................................................13
Store a Call List Number into the Phonebook ...........13
Delete an entry in the Call List ...................................14
Delete the entire list of the Call List ...........................14
View the Details OF THE Call List Entry ....................14
Phonebook ......................................................... 15
Private Phonebook .....................................................15
Add a New Phonebook Entry .....................................15
View a Phonebook Entry ............................................ 15
Edit a Phonebook Entry.............................................. 15
Delete A phonebook Entry .........................................16
Delete the Entire Private Phonebook .........................16
Check the Phonebook U
sage ....................................16
Text and Digit Entry Table .......................................... 17
www.vtech.com
II
Table of contents
Base Settings .................................................... 18
Dial Type .....................................................................18
Change the dial mode ................................................18
Change the system PIN Code ....................................18
Paging (Find the handset) ..........................................18
Handset Settings .............................................. 19
Alarm Settings ............................................................19
Turn on/off the Alarm .................................................. 19
Set the Alarm Time ..................................................... 19
Ringer Setup ...............................................................20
Set the Ringer Melody for Internal Calls ....................20
Set the Ringer Melody for External Calls ...................20
Set the Ringer Volume ...............................................20
Tone Setup .................................................................21
Set Key Tone ..............................................................21
Set Battery Tone .........................................................21
Set Out Of Range Tone ..............................................21
Set the Handset Language ........................................22
Rename the Handset .................................................22
Set Handset Display ...................................................22
Set the Auto Answer ...................................................23
Date and Time Settings .................................... 23
Change the Date Format ............................................23
Change the Time Format ...........................................23
Set the Time ...............................................................24
Set the Date ................................................................24
Reset your Phone .......................................................24
Troubleshooting ................................................ 25
Technical Specication ..............................................26
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric
shock and injury, including the following:
1)
1
Read and understand all the instructions.
2) Follow all warnings and instructions marked on the product.
3) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
4) Do not use this product near water (for example, near a bath tub, kitchen si
nk, swimming pool).
5) Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
6) Unplug this product from the wall outlet and refer servicing to Vtech under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating instructions.
• If the product has been dropped and the cabinet has been damaged.
• If the product exhibits a distinct change in perf
ormance.
7) Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock
from lightning.
8) Do not use the telephone to report a gas leak in the vicinity of the leak.
9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods for the handsets are only applicable with
the default battery capacities
10)The use of other battery types or non-rechargeable batteries/primary cells can be dangerous. These may cause
interference
and/or unit damages. The manufacturer will not be held liable for damage arising from such non-compliance.
11)Do not use third party charging bays. The batteries may be damaged.
12)Please note the correct polarity while inserting the batteries.
13)Do not immerse batteries in water, do not place in fire.
If you have questions about this product, or having difficulty with setup or operation, call our Vtech Electronics ( HK LTD).
Customer Ser vice Centre : 852-2776 3223
Technic
al Inquiry Hotline : 852-2667 7433
IMPORTANT SAFETY INSTRUCTIONS
www.vtech.com
2
Installation
Setting up the telephone
Package contents
The package for the VT1010/V T1010T/VT1515/VT1616 contains the following items:
VT1010
• 1 Handset
• 1 Base station
• 1 AC power adapter
• 1 Telephone line cord
• 2 rechargeable batteries
• 1 English user manual and
1 Chinese user manual
Location
The maximum range between the base station and the handset is approximately 300 meters. Depending on
the surrounding conditions as well as spatial and structural factors, the range may be reduced. The
range
indoors is normally less than outdoors.
• 2 Handsets
• 1 Base station
• 2 AC power adapters
• 1 Telephone line cord
• 1 Charger
• 4 rechargeable batteries
• 1 English user manual and
1 Chinese user manual
VT1010T
• 3 Handsets
• 1 Base station
• 3 AC power adapters
• 1 Telephone line cord
• 2 Chargers
• 6 rechargeable batteries
• 1 English user manual and
1 Chinese user manual
VT1515 / VT1616
www.vtech.com
3
Before you can start using your telephone you must plug in the telephone connection cords and the mains
cable.
Connecting the base station
1) Plug the power supply & line cord into the base station.
2) Plug the power supply & line cord into the wall socket.
3) Always use the cables provided in the box.
• Your
telephone
will not
function if the
mains plug
or adapter is
not plugged
in. Thus, first
charge the
battery before
you connect
the unit with
the telephone
network.
The unit will
fu
nction only
if it is charged
completely.
Connecting the telephone
Socket for telephone
connection cord
Socket for mains cable
www.vtech.com
4
Installation
1) Slide open the battery compartment cover.
2) Place the 2 batteries as indicated. Respect polarity.
3) Slide the battery compar tment cover back.
4) Put the handset on the base and charge for 14 hours first time. A beep indicates that the handset is properly
placed on the base or charger.
Installing and charging the batteries
Use only the power pack provided for the base station.
Use only NiMH rechargeable batteries.
www.vtech.com
5
1. LEFT SOFT KEY (MENU/OK)
In idle mode: Press to access the main menu
In sub-menu mode: Press to confirm the selection
During a call: Press to access Phonebook/ Redial List/
Call List/ Intercom
2. RIGHT SOFT KEY (CLEAR/BACK/MUTE/
INTERCOM)
In main menu mode: Press to go back to idle screen
In sub-menu mode: Press to go back to previous level
In sub-menu mode: Press and hold to go back to idle
screen
In editing / predialing mode: Press to clear a character / digit
In editing / predialing mode: Press and hold to delete all the
characters / digits
During a call: Press to mute / unmute the microphone
In idle mode: Press to intercom another handset
3. UP
In idle mode: Press to access the call list
In menu mode: Press to scroll up the menu items
In menu mode: Press and hold continuously to perform a
continuous up-scrolling of the menu.
In Phonebook list / Redial list / Calls log: Press to scroll
up the list
During a call: Press to increase the volume
In ringing: Press to increase the ringer volume
4. DOWN
In idle mode: Press to access the redial list
In menu mode: Press to scroll down the menu items
In menu mode: Press and hold continuously to perform a
continuous down-scrolling of the menu.
In Phonebook list / Redial list / Calls log: Press to scroll
down the list
During a call: Press to decrease the volume
In ringing: Press to decrease the ringer volume
5. TALK ON
In idle / predialing mode : Press to make a call
In Redial list / Calls Log / Phonebook entry: Press to
make a call to the selected entry in the list During ringing:
Press to answer a call
6. TALK OFF
During a call: Press to end a call and go back to idle
screen
In menu / editing mode: Press to go back to idle screen
In idle mode: Press and hold to power off the handset
In idle mode (when the handset is powered off): Press to
power on the handset
7. ALPHANUMERIC KEYPAD, * (STAR), #
(HASH)
Press to insert a digit / character / * / #
* key in idle mode: Press and hold to turn off the ringer
* key during a call (in Pulse mode): Press to switch to
tone mode
# key in Idle mode: Press and hold to turn on / off the
keypad lock
0 key in idle / predialing / number editing mode
: Press and
hold to insert a pause
8. SPEAKERPHONE
During a call: Press to turn on / off the speakerphone.
In Idle mode / predialing mode / Redial list / Calls
Log / Phonebook entry: Press to make a call with
speakerphone
During ringing: Press to answer a call with speakerphone
9. PHONEBOOK
In idle mode: Press to access the phonebook list
10. FLASH
In idle / predialing mode: Press to insert a flash
During a call: Press to dial a flash
11. MICROPHONE
12. EARPIECE
Getting to know your phone
Overview of the handset
1
2
3
4
5
6
7
8
9
10
11
12
www.vtech.com
6
Telephone settings
1. PAGE
Press the Page on the base station to page your handset. It will ring for approximately 60 seconds.
Press on the handset or on the base to stop the paging.
2. Charging cradle for the handset.
Getting to know your phone
Overview of the base station
Page key
Charging cradle for the handset.
Loading...