Page 1
Product Information Guide
Read this important Product Information Guide
before using your InnoTab® MAX.
The full InnoTab® MAX User's Manual can be found online at
http://www.vtechkids.com/innotabmax/manual
Page 2
1
Included in This Package
Specification of Power Adapter:
Input: 120V 60Hz 300mA AC
Output: 5V 2A DC
Warning: All packing materials, such as tape, plastic sheets, packaging locks, wire
ties, and tags are not part of this toy, and should be discarded for your child’s safety.
Note: Please keep the Quick Start Guide and Product Information Guide as they
contain important information.
Inserting a microSD Card
You can insert a microSD memory card (not included) into your InnoTab®
MAX to expand available memory for downloaded content, photos, videos
or music. The InnoTab® MAX is compatible with microSD memory cards
up to 32GB.
• Make sure the tablet is turned off.
• Turn the
InnoTab® MAX over, and locate the microSD card slot on
the back. Insert the microSD card as shown above.
Stylus String
USB Cable and
Power Adapter
InnoTab® MAX Software
Preview Cartridge
Quick Start
Guide
InnoTab® MAX
InnoTab® MAX Stylus
Product Information
Guide
microSD Card slot
Insert the microSD card
with the text facing you.
Page 3
2
Using the Detachable Cover and Stand
Using the Stand
The cover can protect the screen of your
InnoTab® MAX when flipped to the front.
Flipping the cover to the back makes a
stand to provide a better viewing angle
for watching videos or a photo slide show.
Detaching the Cover
The cover can be removed to make the InnoTab® MAX slimmer and more
lightweight.
Repeat the steps on the other side.
Attaching the Cover
1) Pull out on one of the hinges of the
cover.
2) Insert the valve into one of the sockets
and push in until you hear and feel a
"click."
Repeat the steps on the other side.
1) Slide down and
hold the cover lock
switch.
2) Pull out on the
hinge.
Page 4
3
Care & Maintenance
1. Keep your InnoTab® MAX out of direct sunlight and away from direct
sources of heat.
2. Turn off your
InnoTab® MAX when not using it for an extended period
of time.
3. Avoid dropping your
InnoTab® MAX and NEVER try to dismantle it.
4. Always keep your
InnoTab® MAX away from water.
5. Examine the power adapter periodically for conditions that may result
in the risk of fire, electric shock, or injury to persons (such as damage
to the output cord, blades, housing, or other parts). In the event of such
conditions, the adapter should not be used until properly repaired.
Using the InnoTab® MAX Touch Screen and Stylus:
• Use your finger or the included stylus to operate the tablet. Be careful
not to press down too hard, as too much pressure may damage the
touch screen.
• Do not use the stylus if it is broken.
• Do not use any other stylus on the touch screen other than the
InnoTab®
MAX stylus.
• Put the stylus back in the stylus holder when not in use.
Cleaning the InnoTab® MAX Touch Screen
• Slightly dampen a soft, lint-free cloth with a little water and wipe the
screen to loosen dirt.
• Use a clean and dry cloth to wipe the screen dry. Repeat these two
steps as needed.
Cleaning the InnoTab® MAX Cabinet
• Keep your InnoTab® MAX clean by wiping it with a slightly damp cloth.
Never use solvents or abrasives.
WARNING
A very small percentage of the public, due to an existing condition, may experience
epileptic seizures or momentary loss of consciousness when viewing certain types
of flashing colors or patterns, especially on television. While the
InnoTab® MAX does
not contribute to any additional risks, we do recommend that parents supervise their
children while they play video games. If your child experiences dizziness, altered
vision, disorientation, or convulsions, discontinue use immediately and consult your
physician. Please note that focusing on an LCD screen at close range for a prolonged
period of time may cause fatigue or discomfort. We recommend that children take
a 15-minute break for every hour of play.
Page 5
4
If your InnoTab® MAX does not respond to an inserted cartridge, please
carefully try the following:
• Turn off the
InnoTab® MAX and unplug all wiring.
• Use a cotton swab dipped in rubbing alcohol or an alcohol-based
window cleaner to gently clean the contact area of the cartridge slot.
• If necessary, dry all the clean contact areas with a soft, lint-free cloth.
• Make sure that all parts are completely dry before restoring electricity.
Static electricity may cause the
InnoTab® MAX to malfunction. In some
cases, the game play score stored in the tablet memory may be lost. In
cases where the InnoTab® MAX is malfunctioning due to static electricity,
reset the tablet by pressing and holding the Power button for 10 seconds
until the unit turns off. Then press and hold the Power button for 3
seconds to turn on the unit again. Or, if the static electricity malfunction
occurred during the downloading process, disconnect the USB cable,
delete the corrupted file, and reset the tablet as described above. Then
reconnect the USB cable and restart the download process.
For more information and troubleshooting tips, visit
www.vtechkids.com/tutorials/innotabmax
Safety Precautions for Using the Battery and Charger
Important Notes:
• This charger is not a toy. This charger is not intended for use by children.
• The tablet will charge at temperarures between 41°F~95°F(5°C~35°C).
If the tablet is not charging properly, please move it to a location with
a suitable temperature.
• The battery is not removable.
• Disconnect the tablet from the Power Adapter and turn off the tablet
before cleaning.
• Only use the Power Adapter that is included with this package.
• To prevent fire or electric shock, do not expose the unit to rain or
moisture.
• To preserve battery life, the
InnoTab® MAX will go into a sleep mode
automatically when there is no input for a few minutes. The Wi-Fi
connection will also be disconnected when the battery power is low.
Standard guidelines for adapter toys and electrically
operated products
• As with all electrical products, precautions should be used and
observed during handling and use to prevent electric shock.
• Do not leave the toy plugged in for extended periods of time.
Page 6
5
• The toy shall only be used with a power adapter for toys.
• Never clean a plugged-in toy with liquid.
• Never use more than one adapter.
• The adapter is not a toy.
• Parents should periodically examine the adapter for conditions that
may result in the risk of fire, electric shock, or injury to persons. In the
event of such conditions, the adapter should not be used until properly
repaired.
Caution
When not charging the battery or connected to a computer, close the USB port cover
on the
InnoTab® MAX for safety.
Only use the
InnoTab® MAX Power Adapter and Micro-USB cable to charge your
device.
Using a different charger may damage your
InnoTab® MAX.
Please note: VTech is the only service provider that is authorized to replace the battery
on your
InnoTab® MAX. Any attempt to remove or replace the battery by a third party
or by yourself may damage your InnoTab® MAX and will void your warranty. If you feel
your battery needs service, please contact VTech's Consumer Services Department.
Technical Support
• If you have a problem that cannot be solved by using this manual, we
encourage you to visit us online or contact our Consumer Services
Department with any problems and/or suggestions that you might have.
A support representative will be happy to assist you. Before requesting
support, please be ready to provide or include the information below:
• The name of your product or model number (the model number is
located on the back of the display panel).
• The actual problem you are experiencing.
• The actions you took right before the problem started.
Internet : www.vtechkids.com
Phone : 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada
Copyright Notices
© 2014 VTech®. All Rights Reserved. InnoTab®, Learning Lodge®, VTech
®
and the VTech® logo are registered trademarks of VTech. All other
trademarks are property of their respective owners. The terms HDMI
and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Page 7
6
IMPORTANT NOTE:
Creating and developing the InnoTab® MAX is accompanied by a
responsibility that we at VTech® take very seriously. We make every effort to
ensure the accuracy of the information that forms the value of our products.
However, errors sometimes can occur. It is important for you to know that
we stand behind our products and encourage you to call our Consumer
Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in
Canada, with any problems and/or suggestions that you might have. A
service representative will be happy to help you. This product is licensed
under the AVC patent portfolio license for the personal use of a consumer
or other uses in which it does not receive remuneration to
(i) encode video in compliance with the AVC standard (“AVC video”)
and/or
(ii) decode AVC video that was encoded by a consumer engaged in a
personal activity and/or was obtained from a video provider licensed to
provide AVC video.
No license is granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, L.L.C. See
http://www.mpegla.com
Disclaimer and Limitation of Liability
VTech® Electronics North America, L.L.C. and its suppliers assume no
responsibility for any damage or loss resulting from the use of this
handbook. VTech® Electronics North America, L.L.C. and its suppliers
assume no responsibility for any loss or claims by third parties that may
arise through the use of this software. VTech® Electronics North America,
L.L.C. and its suppliers assume no responsibility for any damage or loss
caused by deletion of data as a result of malfunction, dead battery,
or repairs. Be sure to make backup copies of important data on other
media to protect against data loss insert line break. Company: VTech®
Electronics North America, L.L.C.
Address: 1156 W. Shure Drive, Suite 200, Arlington Heights, IL 60004 USA
Phone : 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
Page 8
7
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES AND INDUSTRY
CANADA LICENCE-EXEMPT RSS STANDARD(S). OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION OF THE DEVICE.
LE PRÉSENT APPAREIL EST CONFORME AUX CNR D'INDUSTRIE
CANADA APPLICABLES AUX APPAREILS RADIO EXEMPTS DE LICENCE.
L'EXPLOITATION EST AUTORISÉE AUX DEUX CONDITIONS SUIVANTES:
(1) L'APPAREIL NE DOIT PAS PRODUIRE DE BROUILLAGE, ET (2)
L'UTILISATEUR DE L'APPAREIL DOIT ACCEPTER TOUT BROUILLAGE
RADIOÉLECTRIQUE SUBI, MÊME SI LE BROUILLAGE EST SUSCEPTIBLE
D'EN COMPROMETTRE LE FONCTIONNEMENT.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
USB cable with ferrite must be used with this equipment to ensure
compliance with the Class B FCC limits.
Page 9
8
END USER LICENSE AGREEMENT
THIS IS A LEGAL AGREEMENT BETWEEN YOU AND VTECH INC. (“VTECH”), STATING
THE TERMS THAT GOVERN YOUR USE OF SOFTWARE FOR INNOTAB® MAX OR IN
CONNECTION WITH THE APPLICATION OF SOFTWARE (“SOFTWARE”). “SOFTWARE”
INCLUDES AUDIO FILES FOR THE INNOTAB
®
MAX SYSTEM.
BY ACTIVATING, USING, DOWNLOADING OR INSTALLING THIS SOFTWARE , YOU ARE
AGREEING TO BE BOUND BY THE TERMS OF THIS AGREEMENT. YOUR RIGHT TO USE
THE SOFTWARE IS CONDITIONAL UPON YOUR AGREEMENT TO THESE TERMS. IF YOU
DETERMINE THAT YOU ARE UNWILLING TO AGREE TO THE TERMS OF THIS LICENSE
AGREEMENT, YOU HAVE NO RIGHT TO USE THE SOFTWARE AND YOU SHOULD
PROMPTLY RETURN THE SOFTWARE TO VTECH OR DELETE IT.
IF YOU ARE UNDER THE AGE OF 18 OR ARE OTHERWISE CONSIDERED A MINOR IN
YOUR JURISDICTION, YOU SHOULD REVIEW THESE TERMS AND CONDITIONS WITH
YOUR PARENT OR GUARDIAN (COLLECTIVELY, “PARENT”) AND MAKE SURE THAT
YOUR PARENT UNDERSTANDS AND AGREES ON YOUR BEHALF TO THESE TERMS
AND CONDITIONS.
WHEREVER THIS AGREEMENT REFERS TO “YOU” OR “YOUR,” IT IS MEANT TO INCLUDE
BOTH PARENT AND CHILDREN USERS, EXCEPT WHERE A CHILD IS NOT OF SUFFICIENT
LEGAL AGE TO ENTER INTO A BINDING CONTRACT (SUCH AS AN E-COMMERCE
TRANSACTION) OR PROVIDE ANY REQUIRED CONSENTS (SUCH AS CONSENT TO DATA
COLLECTION, PROCESSING, OR TRANSFERS), IN WHICH CASE THE PARENT OF SUCH
CHILD HEREBY ACKNOWLEDGES AND AGREES HE/SHE IS ACTING ON THE CHILD’S
BEHALF TO EFFECTUATE SUCH CONTRACTS OR CONSENTS AND IS FULLY LIABLE
FOR THE ACTIONS OR INACTIONS OF SUCH CHILD WITH RESPECT TO THE USE OF THE
SOFTWARE AND RELATED SERVICES.
1. OWNERSHIP. The Software and Documentation (including all content contained within
the Product) are owned by VTECH, or its licensors, and are protected by international
copyright and other intellectual property laws. The Software and Documentation shall only
be used by you in accordance with this Agreement. The Software and Documentation are
licensed, not sold. Except as specifically set forth herein, VTECH and its licensors retain
all right, title and interest, including all intellectual property rights, in and to the Software
and Documentation.
2. LICENSE TERMS. VTECH grants to you, subject to the terms, conditions and limitations
further defined in this Agreement, a non-exclusive, non-sublicenseable, non-transferable
license for non-commercial use, and to use the Documentation in connection with such use
of the Software. Any modifications, upgrades, error corrections, or other updates to the
Software provided by VTECH to you shall be deemed part of the Software and use thereof
shall be governed by the terms and conditions of this Agreement, unless the parties have
entered into a separate, written agreement governing such modifications, upgrades, error
corrections, or other updates.
3. RESTRICTIONS ON REVERSE ENGINEERING AND SECURITY. Except to the extent
otherwise expressly and unambiguously authorized by VTECH or to the extent such
restrictions are explicitly prohibited by applicable law, you shall NOT reverse engineer,
decompile, disassemble, translate or attempt to learn the source code of the Software
(ii) copy, modify, create derivative works of, distribute, sell, assign, pledge, sublicense,
lease, loan, rent, timeshare, deliver or otherwise transfer the Software (iii) remove from
the Software, or alter or add, any copyright, trademarks, trade names, logos, notices
or markings (iv) violate, tamper with or circumvent any security system or measures
implemented by VTECH which are designed to prevent unauthorized copying of the
Page 10
9
Software. Any such forbidden use shall immediately terminate your license to the Software
without any prior notice.
4. LIMITED WARRANTY. VTECH warrants to you – subject to your compliance with the
terms herein – that for a period of ninety (90) days from the date you purchase the
Product, the Software will substantially conform to VTECH’s published specifications for
the Software. Your sole and exclusive remedy under the foregoing warranty shall be for
VTECH, at its choice, to use commercially reasonable efforts to correct any substantial
non-conformity of the Software reported to VTECH in writing within the warranty period
and/or provide a replacement copy of the Software. The foregoing warranty shall not apply
to any non-conformity that is caused by (i) the use or operation of the Software with an
application or in an environment other than that intended or recommended by VTECH, (ii)
modifications to the Software not made by VTECH or (iii) third party hardware or software
provided by any third party.
VTECH MAKES NO WARRANTIES THAT THE SOFTWARE IS ERROR FREE OR IS SUITABLE
FOR YOUR PURPOSES. VTECH MAKES NO WARRANTIES OTHER THAN THOSE SET
FORTH ABOVE, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESS,
IMPLIED OR STATUTORY, WITH RESPECT TO THE SOFTWARE OR DOCUMENTATION,
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY VTECH, ITS RESELLERS, AGENTS OR EMPLOYEES
SHALL CREATE A WARRANTY.
5. LIMITATION OF LIABILITY. IN NO EVENT SHALL VTECH BE LIABLE FOR ANY LOSS OF
PROFITS, USE OF DATA, COST OF REPLACEMENT GOODS OR HARDWARE, OR OTHER
INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF
YOUR USE OR INABILITY TO USE THE SOFTWARE DOWNLOAD OR DOCUMENTATION,
EVEN IF VTECH HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND
NOTWITHSTANDING THE FAILURE OF ESSENTIAL PURPOSE OF ANY REMEDY. YOU
AGREE THAT IN NO EVENT WILL VTECH’S AGGREGATE LIABILITY HEREUNDER OR
RELATED TO YOUR USE OF THE SOFTWARE OR DOCUMENTATION EXCEED THE AMOUNT
PAID FOR THE PRODUCT AND/OR SOFTWARE.
6. TERMINATION. This License Agreement will automatically terminate if you fail to comply
with any term thereof. No notice shall be required from VTECH to effect such termination.
2014 © VTech Printed in China 91-002964-004
US
Loading...