VTech Gear Zooz Roll & Roar Animal Train User Manual
Parent’s Guide
Roll & Roar Animal Train
TM
91-003372-000
US
2
2
2
INTRODUCTION
Thank you for purchasing the GearZoozTM Roll & Roar Animal TrainTM
by VTech®! This adorable train will take your little one on an exciting
learning adventure. Let your child create their own unique train by
mixing and matching the 15 included gears while strengthening their
ne motor skills and problem-solving techniques.
On/Off Activity Switch
2 Handle Gears9 Standard Gears
4 Smart Gear™ Animals
Pull Cord
Location Slider
Light-Up Instrument Buttons
Standard Pole
Purple Smart Pole
Trigger Gear
Volume
Control Switch
3
3
3
INCLUDED IN THIS PACKAGE
• One VTech® Roll & Roar Animal Train
TM
• Four Smart GearTM animals
• Nine standard gears
• Two handle gears
• One parent’s guide
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy, and should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains important
information.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE : Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
Unlock the packaging locks:
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks and discard.
4
4
4
Remove the Cable Ties:
Cut the ties with a pair of scissors.
Remove the ties.
Unlock the Smart Gear
TM
Lion:
1. Slide the white tab to the right to unlock the Smart Gear
TM
lion.
2. Lift the tab and Smart Gear
TM
lion off the train engine.
3. Discard the white tab.
Pull out the Train Connector
1. Locate the orange train connector underneath the Bear’s Train Car.
2. Slide the train connector out until it clicks into place.
5
5
5
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back side of
the unit and open it with a screwdriver.
3. Install 2 new AA size (AM-3/LR6) batteries
into the battery box as illustrated. (The use
of new alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in re.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Loading...