Vortex Optics SUMMIT XLT TRIPOD User Manual

Features

5-section legs for maximum height with minimum

packing length.

Light weight for an easy carry.

Twist leg locks for variable height adjustment and

reduced bulk.

Compact ball head with quick-release plate and locking mechanism.

Variable leg angle adjustments allow for flexible positioning.

Balance hook holds extra weight for greater stability in windy conditions.

Rubber feet stand sure-footed on slick surfaces.

Specifications

Height Range

Maximum Load

Leg Sections

Leg Angles

Weight

Folded Height

Folded Width

7.6–64.1”

11 pounds

3.6 pounds

18.1”

4.0”

Our ultimate field-packing tripod, the SummitTM is the perfect combination

of size, weight, rugged build and fast operation. No other tripod can get out

of your pack and on target quicker than a Summit.

Compact Ball Head

Quick-Release Plate

Bubble Levels

Center Column Safety Latch and Lever Lock

Anodized Aluminum Legs

Leg Angle Release Tabs

- 2 - - 1 -

Adjusting the ball head

The Ball Head can be adjusted to any angle. Loosen or tighten the Positioning Knob to

adjust the plate angle.

To attach or detach the

quick-release plate, pull

QR Plate

Quick-Release Throw Lever

the Throw Lever out.

Attach the quick-release

Positioning Knob

plate to the desired optic

or camera.

Bubble Levels

If desired, reference the Bubble Levels to

ensure tripod plate is level.

Rubber Feet

Removable Center Column Section

Attachable Balance Hook

Twist Locks

Multiple Bubble Levels

Balance Hook

To help stabilize the tripod in windy conditions, attach the Balance Hook and hang a weight (not supplied) from it.

- 4 - - 3 -

Adjusting the center column

Change the position of the center column to raise the tripod head for

additional height. Unlock the center column by pushing the silver Safety Latch down and flipping the Lever Lock upward. Once you

have moved the center column to the desired height, lock the height in

place by flipping the center column lock back down.

Lever Lock

1. Push Safety Latch Down to Unlock

2. Flip the Lever Up and Adjust Center Column

For very low heights, the center column can be split by unscrewing and

removing the lower section.

Adjusting the leg length

Grasp the rubber section at the very end of the tripod leg and rotate

counter-clockwise until you have felt four distinct clicks.

While maintaining grip on rubber end section, extend

the leg to desired length. When leg is at desired length,

twist the rubber end section clockwise to lock in place.

Leg will extend to a maximum of five sections.

To collapse the legs, grasp the rubber end section and

rotate counter-clockwise until you have felt four clicks.

Locks will then be released and leg can be collapsed.

Twist clockwise to re-lock legs.

Twist to Lock and Unlock Leg

Adjusting the leg angle

The legs of the Summit XLT can be set at one of three angles. To adjust the leg angle, slide the Release Tab to the right and pivot the leg

outward to the desired angle.

Lower Section of Center Column Removed

THE VORTEX 3-YEAR WARRANTY

This tripod is warranted to be free of defects in materials and

workmanship for three years after purchase. If

found to be defective in materials or workmanship

upon our inspection, Vortex Optics will repair or

replace the product or part.

Rest assured, if your tripod should ever require

repair, all you need do is contact Vortex Optics at 800-426-0048 for

prompt, professional, and friendly service.

1. Push Release Tab to Right

2. Pivot Leg and Engage Release Tab at Desired Angle

- 6 - - 5 -

Vortex Optics

2120 West Greenview Drive

Middleton, WI 53562

service@vortexoptics.com

Visit vortexoptics.com for more information. Canadian customers

may visit vortexcanada.net for customer service information.

Manual #ST-3-11A

- 8- - 7 -