Vortex Optics SKYLINE TRIPOD User Manual

Features

Micro-fluid head delivers precise and smooth action.

Variable leg angle adjustments allow for flexible positioning.

Padded leg wraps for added comfort.

Flip lever leg locks for rapid set up and height adjustment.

Anodized aluminum legs for sturdy support.

Balance hook holds extra weight for greater

stability in windy conditions.

Adjustable quick-release plate and locking mechanism.

Rubber feet stand sure-footed on slick surfaces.

Specifications

Height Range

Maximum Load

Leg Sections

Leg Angles

Weight

Folded Height

Folded Width

8.9–68.0”

11 pounds

5.0 pounds

26.0”

4.5”

For rock-solid performance in the most demanding situations, you need

a Skyline

tripod. Rugged anodized legs and a smooth, precise microﬂ uid head will help deliver maximum performance from your optics set-up.

Micro-Fluid Head

Center Column Safety Latch and Lever Lock

Flip Lever Locks

Bubble Level

Removable Center Column Section

Attachable Balance Hook

Adjustable Quick-Release Plate

Leg Angle Release Tabs

Padded Leg Wraps

Anodized Aluminum Legs

Rubber Feet

- 2 - - 1 -

Adjusting the micro-fluid head

Use the Pan and Tilt Tension Adjust Knobs to set desired tensions for

horizontal and vertical

movement.

Tilt Tension Adjust Knob

Control Arm

To remove the

quick-release (QR) plate, loosen the QR

Plate Hold-Down

Pan Tension Adjust Knob

Knob. Then, slide the plate and turn the Plate Safety Release Knob counter-clockwise. The

quick-release plate can then be removed and attached to desired optic

or camera. Reinstall the quick-release plate, adjust balance point, and tighten the Hold-Down Knob.

QR Plate Hold-Down Knob

QR Plate Safety Release Knob

Loosen and tighten the

Control Arm Adjust Knob to adjust the

handle angle.

Bubble Level

Control Arm Adjust Knob

Bubble Level

- 4 - - 3 -

If desired, reference the Bubble Level to ensure

tripod plate is level.

Adjusting the center column

Change the position of the center column to raise the tripod head for

additional height. Unlock the center column by pushing the silver Safety Latch down and flipping the Lever Lock upward. Once you

have moved the center column to the desired height, lock the height in

place by flipping the center column lock back down.

Lever Lock

1. Push Safety Latch Down to Unlock

2. Flip the Lever Up and Adjust Center Column

For very low heights, the center column can be split by unscrewing and

removing the lower section.

Lower Section of Center Column Removed

Adjusting the leg length

To extend a leg, release the Flip Lever Lock and slide the leg section

out to the desired length. Press the flip lever

back down to secure a section in place. Leg will

extend to a maximum of three sections.

Padded upper sections on two legs provide a

comfortable place to grip and extra comfort

when carrying.

Release the Flip Lever Lock to Adjust Leg Length

Adjusting the leg angle

The legs of the Skyline can be set at one of three angles. To adjust the leg angle, slide the Release Tab to the right and pivot the leg outward

to the desired angle.

1. Push Release Tab to Right

2. Pivot Leg and Engage Release Tab at Desired Angle

Balance Hook

To help stabilize the tripod in windy conditions, attach the Balance Hook and hang a weight (not supplied) from it.

THE VORTEX 3-YEAR WARRANTY

This tripod is warranted to be free of defects in materials and

workmanship for three years after purchase. If

found to be defective in materials or workmanship

upon our inspection, Vortex Optics will repair or

replace the product or part.

Rest assured, if your tripod should ever require

repair, all you need do is contact Vortex Optics at 800-426-0048 for

prompt, professional, and friendly service.

Vortex Optics

2120 West Greenview Drive

Middleton, WI 53562

service@vortexoptics.com

Visit vortexoptics.com for more information. Canadian customers

may visit vortexcanada.net for customer service information.

- 6 - - 5 -

Manual #SKY-1-11A

- 8- - 7 -