Page 1
Built to handle the roughest conditions, this
compact scope is designed to provide glassing
ability in a quick handling, lightweight package.
The Recon scope offers brilliant optical
performance using Vortex’s premium XD glass
and XR lens coatings.
Using a unique modular design with Picatinny rails,
the Recon permits almost unlimited options in
accessory attachment
and hand placement.
The clip allows rapid
attachment and
detachment—and can
be positioned in one
of three locations.
1
Page 2
Objective Lens
Tripod Adapter
Socket
Clip
Image Focus Wheel
Twist-up Eyecup
Accessories
Included with the Recon Scope
Rain/dust hood
Uni-Daptor tripod adapter
Tripod
Tethered objective lens cover
Picatinny rail
Other accessories available from Vortex Optics
2x Doubler
killFLASH ARD
Lens cleaning kit
®
Low light polarizing filter
Extra Picatinny rail
Extra Uni-Daptor base
Basic Operation
Adjusting the Image Focus
Use the main focus wheel on the eyepiece to
obtain crisp, sharp images of
objects at varying distances.
Designed for quick operation,
simply place the thumb
and forefinger on the focus
wheel and turn to move lens
forward or backward until the
Rotate to focus image
image is as sharp as possible.
Adjusting the Eyecup
The adjustable eyecup on the Recon scope is
designed to accommodate both eyeglass wearers
and non-eyeglass wearers.
• Keep the eyecup fully extended
when viewing without eyeglasses.
• Twist the eyecup down when
viewing with eyeglasses.
23
Page 3
Carrying with the Clip
Depending on user preference, the
clip can be positioned in several
locations. This versatile carrying
option allows quick attachment of
the Recon scope to pocket edges,
equipment or other field locations.
Lanyard
Thread the lanyard on one
of the built-in loops of the
Recon scope. The lanyard
can be worn around the
neck, or used as a safety
cord when carrying the
scope with its clip.
Recon Tripod
The Recon comes with an ultra-compact field
tripod which may be used to steady the Recon while
observing or ranging small
objects. Thread the Recon
directly onto the tripod—the
flexible legs adapt to a wide
range of surfaces.
Uni-Daptor
Post
Base
Stud
For added height and a quick-release option,
attach the Recon to the tripod with the
quick-release Uni-Daptor.
1. Attach the base unit of the Uni-Daptor
to the tripod mounting plate.
Picatinny Rail
This allows quick attachment of any accessory using
the standard Picatinny
rail clamp—attach the
rail on either side of the
Recon scope.
45
2. Attach the post unit to the Recon
by threading the 1/4x20 stud into
tripod socket on the scope.
When not using the tripod, fold
the post of the Uni-Daptor alongside the length of the
Recon and continue viewing.
Page 4
Hand Strap
The padded handstrap can
be positioned on the left
or right side of the Recon
scope according to the user’s
preference.
Rain/Dust Hood
The easy slip-fit design helps
keep ocular lenses free of
moisture and dust. To attach
or detach, simply slide
attachment slit over the end of the clip. The hood
can then be pulled off and on over the eyepiece.
Case
The Recon scope comes with a soft case which may
be attached to articles of gear or clothing using
MOLLE straps or the built-in belt loop.
Objective Lens Cover
Cover and protect the objective lens
with the tethered cover.
Maintenance
Protect Lenses
The neoprene hood protects the ocular lens
from rain and dust when not actively viewing
through the Recon. The Recon carry case
provides extra protection for the scope.
If the optics are exposed to moisture, keep the caps off and
allow the optics to dry out completely before putting them
in the case for storage.
Keep Lenses Clean
When cleaning lenses, be sure to use products,
like those in Vortex lens cleaning kits, that are
specifically designed for coated optical lenses.
• Be sure to blow away any dust or grit on
the lenses prior to wiping the surfaces.
• Using your breath, or a very small amount
of water or pure alcohol, can help remove
stubborn things like dried water spots.
Other cleaning options
Cleaning fluid and optical paper can also be used. However, you
should never use facial tissue, heavy cotton, or flannel clothing
on lenses—these materials can scratch the lens surfaces.
67
Page 5
Vortex Service and Repair Policy
Unconditional Lifetime Warranty
Vortex Optics wants you to use your Recon
Mountain scope under any conditions with complete
confidence—that’s why our
warranty is straightforward
and simple:
• Fully transferable
vortexoptics.com
• No warranty card needed
• No receipt needed
Unconditional Lifetime
Warranty
Rest assured, if this scope should ever require
repair, all you need to do is contact Vortex for
absolutely free service. Call 800-426-0048 or
e-mail service@vortexoptics.com.
Vor tex Optics
2120 West Greenview Drive
Middleton, Wisconsin 53562
USA
Patent Pending
Visit Vortex Optics at vortexoptics.com.
8
Loading...