Vortex Optics PRO GT TRIPOD User Manual
Features
Rugged 3-way pan head provides ultra-smooth
horizontal and vertical adjustments.
Anodized aluminum legs for sturdy support.
Flip lever leg locks for rapid set up and height
adjustment.
Padded leg wraps for added comfort.
Balance hook holds extra weight for greater
stability in windy conditions.
Quick-release plate and locking mechanism.
Rubber feet stand sure-footed on slick surfaces.
Specifications
Height Range
Maximum Load
Leg Sections
Leg Angles
Weight
Folded Height
Folded Width
23.9–67.1”
10 pounds
3
Fixed
4.4 pounds
24.6”
5.0”
For reliable performance at a reasonable cost, look to the Pro GTTM. Built
to handle any condition, sturdy anodized legs combined with a rugged
3-way quick-release pan head deliver smooth, solid support for your optics.
Quick-Release
Plate
3-Way Pan Head
Padded
Leg Wraps
Anodized
Aluminum
Legs
Flip Lever
Locks
Center Column
Rubber
Feet
- 2 - - 1 -
Adjusting the 3-way pan head
Grasp the Control Arm and rotate to adjust the tilt and pan the
head—counter-clockwise
to loosen and clockwise to
tighten.
To attach or detach the
quick-release plate, pull the
Plate Release Lever out.
Attach the Quick-Release
Plate to the desired optic or
camera.
Loosen Plate Angle Adjustment Knob
to Adjust Quick-Release Plate
Plate Release
Lever
Rotate Control
Arm to Adjust
Pan and Tilt
Action
Attachable
Balance Hook
- 4 - - 3 -
Adjusting the center column
Loosen and tighten the Column Height Adjustment Knob to raise
or lower the center column.
Extendable
Center Column
Column Height
Adjustment Knob
Balance Hook
To help stabilize the tripod in windy conditions, attach the Balance
Hook and hang a weight (not supplied) from it.
Adjusting the leg length
To extend a leg, release the flip-lever lock and slide the leg section
out to the desired length. Press
the flip-lever back down to
secure a section in place. Leg
will extend to a maximum of
three sections.
Extended
Legs
Release the Flip Lever Lock
to Adjust Leg Length
Padded upper sections on two
legs provide a comfortable
place to grip and extra comfort
when carrying.
THE VORTEX 3-YEAR WARRANTY
This tripod is warranted to be free of defects in materials and
workmanship for three years after purchase. If
found to be defective in materials or workmanship
upon our inspection, Vortex Optics will repair or
replace the product or part.
Rest assured, if your tripod should ever require
repair, all you need do is contact Vortex Optics at 800-426-0048 for
prompt, professional, and friendly service.
Vortex Optics
2120 West Greenview Drive
Middleton, WI 53562
service@vortexoptics.com
Visit vortexoptics.com for more information. Canadian customers
may visit vortexcanada.net for customer service information.
- 6 - - 5 -
Manual #PRO-2-11A
© Vortex Optics
- 8- - 7 -
Loading...