6
TIM key to recall recorded
traffic announcements.
The TIM function has a memory which
can be used to automatically record
traffic announcements. The oldest
announcements will be deleted when
the memory is full (4 minutes).
While the radio is switched on every
traffic announcement on the selected
TP station is recorded.
When the system is switched off
the recording mode is activated
automatically, according to the
setting in the “TIM standby” menu.
The announcements are played
back, starting with the most recent
one, by pressing the TIM button.
The announcement can be stopped
by pressing the button again.
7
INFO key to recall complete
destination display.
The current vehicle location, the
current destination and the estimated
remaining journey time are displayed.
At the same time, the system produces
spoken driving directions.
8 Rocker Switch.
Radio operation.
Automatic station search: Start the
station search by pressing one of
the direction symbols. The radio
is then tuned to the next station
with a sufficiently strong reception.
CD operation.
CD track selection: Press one of the
direction symbols repeatedly until
the desired track is reached.
9
CD eject key.
10
CD-ROM slot for the navigation CD.
11
Night display key.
12
Button NAVI to call up the current
navigation menu and to exit from
navigation guidance.
Note: Press the button twice as
necessary to call up the Navigation
basic menu.
13 Key to recall previous menu
or basic menu.
14
SOUND button to call up
the menus for sound settings.
See rear.
15
AUDIO button to call up the
menu for source selection: radio,
CD or TV/Video.
See rear.
16 Key to recall the basic hold-up
function menu.
Manual traffic jam function:
An alternative route can be chosen
if a traffic jam is announced on your
route. You can define how far the
diversion should be.
Dynamic traffic jam function:
If your vehicle has the appropriate
equipment, it will be able to
dynamically adjust the route guidance
function to suit the current traffic
situation. The system will guide you
to your destination taking incoming
traffic jam reports into account. It will
also decide whether it makes sense
to make a diversion around the traffic
jam. The traffic reports are received
via the RDS-TMC-Radio. For this
purpose, you must be able to receive
one TMC station.
Note: Press the button during active
route guidance mode to call up the
traffic jam function basic menu.
17
Menu button.
To select the menu fields Turn the button.
To enter menu fields Press the button.
18 Screen.
It is possible to adjust the horizontal
and vertical inclination of the screen
to achieve optimum readability by
pressing lightly on the respective
markings on the screen frame.
a - Status line.
This line of the navigation menu
displays the operating state of the
CD changer/radio.
b - Menu area.
Presentation of the menus required for
operating the components Audio, TV
and navigation.
c - Instruction line.
Displays the title of the current menu
and operating directions.
Volkswagen MFD radio-navigation system.
Quick reference guide.
Continued 2 of 4.
12
3 3
4
18 17 16
5
6
7
12
13
14
15
8 9
10 11
a
c
b