Vodafone MachineLink NWL-04 Quick Start Manual And Safety Manual
Vodafone
MachineLink
Ethernet Switch
Quick Start Guide
and Safety Manual
Vodafone
Power to you
QSG-00082 rev 5 - NWL-04 Vodafone MachineLink Ethernet Switch QSG copy.indd 1 18/07/2016 5:30 PM
Welcome
to the world of mobile communications
Thank you for choosing a Vodafone MachineLink Ethernet Switch.
This guide provides simple instructions to help you quickly and
easily set up your device.
QSG-00082 rev 5 - NWL-04 Vodafone MachineLink Ethernet Switch QSG copy.indd 2 18/07/2016 5:30 PM
1
Package
contents
This package includes
• 1 x Vodafone MachineLink
Ethernet Switch
• 1 x 15cm Yellow Ethernet
link cable 8P8C (Ethernet
jumper)
• 1 x 10cm Power link cable
(DC jumper) with two-way
terminal block connector
attached
2 Getting started
3 Device overview
4 Installing your device
10 Overview of LED
indicators
12 Mounting your device
16 Safety and product care
Chapters
• 1 x Two-way terminal block
connector
• 1 x Quick start guide and
safety manual
• 1 x Flat dual joiner
• 1 x Single DIN rail mounting
bracket
A power supply is available
as an optional accessory.
QSG-00082 rev 5 - NWL-04 Vodafone MachineLink Ethernet Switch QSG copy.indd 1 18/07/2016 5:30 PM
2
Getting
started
Depending on your individual setup, you may need certain
components to congure your device correctly.
• External power supply unit for the switch (not included).
• Flathead screwdriver for terminating power input wires.
• Additional fasteners and screwdrivers for specic wall
or rail mounting.
QSG-00082 rev 5 - NWL-04 Vodafone MachineLink Ethernet Switch QSG copy.indd 2 18/07/2016 5:30 PM
3
ITEM DESCRIPTION
1 Gigabit Ethernet ports
1-4
Provides connectivity for up to four network devices at 1000Mbps each.
Each port supports autosensing of the link speed (Auto MDIX) and speed
classes 10/100/1000 Base-T Ethernet.
2 LINK port Connect the provided Ethernet cable between this port and the LAN
port of the router to provide network access to devices connected to the
Gigabit Ethernet ports. The port supports autosensing of the speed class
and supports 10/100/1000 Base-T Ethernet.
3 Power output Connect the power output connector of the provided power supply cable
to this port to deliver power to another unit. Usually this will be a Vodafone
MachineLink 3G, 3G Plus or 4G router. (Provides 12-30V DC/1.5A)
4 Power input Accepts 12-30V DC/2A via the power input 2-way terminal block connector.
1
Device
overview
2
3
4
QSG-00082 rev 5 - NWL-04 Vodafone MachineLink Ethernet Switch QSG copy.indd 3 18/07/2016 5:30 PM
4
Installing
your device
Step 1
To mount the unit on a desktop, slide the Vodafone MachineLink
Ethernet Switch and the Vodafone MachineLink router into the Flat
dual joiner as shown below.
For other mounting methods, please mount the devices after
completing the following steps. Refer to the Mounting your
device section for details.
QSG-00082 rev 5 - NWL-04 Vodafone MachineLink Ethernet Switch QSG copy.indd 4 18/07/2016 5:30 PM
5
Step 2
Connect one end of the provided Ethernet LINK cable to the LINK port
of the Vodafone MachineLink Ethernet Switch. Connect the other end
to the LAN port of the Vodafone MachineLink router that you will use
with the switch.
QSG-00082 rev 5 - NWL-04 Vodafone MachineLink Ethernet Switch QSG copy.indd 5 18/07/2016 5:30 PM
6
Step 3
Connect network equipment to the 4 Ethernet ports on the Vodafone
MachineLink Ethernet Switch. To get Gigabit speeds, ensure that you
use at least Category 5e Ethernet cable.
QSG-00082 rev 5 - NWL-04 Vodafone MachineLink Ethernet Switch QSG copy.indd 6 18/07/2016 5:30 PM
Loading...