Vizio XRU300 Quick Start Manual
QUICK
START
GUIDE
XRU300
UNIVERSAL
REMOTE
Table of Contents
Congratulations on your purchase of
VIZIO Universal Remote Control. With
this Universal Remote, juggling multiple
remote controls is a thing of the past!
Your new remote controls up to 8 devices,
including the most popular brands of TV,
Blu-Ray, DVD, DVR, Cable, and more.
Note: Some functions from your original
remote may not be controlled by this
remote. Use the original remote, if
available, to control such functions.
Sometimes buttons other than described
in these instructions may actually perform
the function. For example, the CHAN and
VOL buttons might be used to navigate
through menu choices. We recommend
you experiment with the remote to
identify if such situations pertain to your
equipment.
Your new remote is easy to use, easy to
program, and it gives you total control—at
the touch of your fi ngertips!
Regulatory Cautions .................................2
Button Descriptions ..................................3
Initial Setup ...............................................5
Battery Insertion ...................................5
Precautionary tips for the battery .........5
Battery Saver .......................................5
Code Saver ..........................................5
Code Setup...............................................6
Setup for TV or other devices ...............6
Using the smart search function ...........7
Smart Learning...................... ....................7
Troubleshooting ........................................9
Warranty . .................................................11
Code List .................................................13
1
Regulatory Cautions
FCC Caution
THIS DEVICE COMPLIES WITH PART 15 OF THE
FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
NOTE: Modifi cations to this product will void the
user’s authority to operate this equipment.
Canadian Notice
This Class B digital apparatus complies with limits
for radio noise emissions specifi
ed in ICES-003 of
the Department of Communications. This device
complies with RSS-210 of Industry and Science
Canada Operation is subject to the following
two conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.
Button Description
2
3 4
INPUT – This button allows the user to cycle
through the available source inputs.
POWER – Press this button to turn the component
on or off.
TV – This button selects a programmed TV.
Note: the remote is pre-programmed to operate
VIZIO TVs by default.
STB – This button selects a programmed cable TV
set-top box or a satellite TV set-top box.
DVD – This button selects a programmed DVD or
Blu-ray player.
Transport keys – Play, Stop, Pause, Record, Fast
Forward, and Rewind.
EXIT – Press this button to exit from the on-screen
menu.
MENU – Display the on-screen menu.
OK – Use this button for the on-screen menu.
Press it to confirm or choose a highlighted menu
selection.
Up, Down, Left, Right – These buttons are used
to navigate the on-screen menu.
BACK – Press this button to return to previous
the on-screen menu.
GUIDE – This button displays program guide
information.
Colored keys – Use with your STB, DVR, etc., if
available.
V Button – This button starts VIZIO Internet
Apps or other component’s multimedia function,
if available
VOL +/- – This button turns the volume up or down.
MUTE – This button turns the sound on and off.
CH +/- – This button changes the channels up or
down.
LAST – This button recalls the previously viewed
channel.
NUMBER BUTTON PAD – Use these buttons to
select a channel.
WIDE – This button switch between display mode.
- (DASH) – When selecting a digital channel
directly, use this button between the main and
sub-channels. For example, channel 28-2 would be
selected by the button sequence 2, 8, DASH, 2.
Button Description
3
4
INPUT – This button allows the user to cycle
through the available source inputs.
POWER – Press this button to turn the
component on or off.
TV, STB, DVD, AUDIO, DVR, HD, CD, AUX
– Device buttons. Used to program a set of
commands to control a single device.
L1, L2, L3, L4 - Miscellaneous programmable
keys.
Transport keys – Play, Stop, Pause, Record,
Fast Forward, and Rewind.
EXIT – Press this button to exit from the onscreen menu.
MENU – Display the on-screen menu.
OK – Use this button for the on-screen menu.
menu selection.
Up, Down, Left, Right – These buttons are
used to navigate the on-screen menu.
BACK – Press this button to return to previous
the on-screen menu.
GUIDE – This button displays program guide
information.
Colored keys – Use with your STB, DVR,
etc., if available.
V Button – This button starts VIZIO Internet
Apps or other component’s multimedia
function, if available
Volume Up/Down – This button turns the
volume up or down.
MUTE – This button turns the sound on and
off.
Channel Up/Down – These buttons change
the channels up or down.
LAST – This button recalls the previously
viewed channel.
NUMBER BUTTON PAD – Use these buttons
to select a channel.
WIDE – This button switch between display
mode.
(DASH) – Use to select digital sub-channels.
For example, channel 28-2 would be selected
by the button sequence 2, 8, DASH, 2.
INFO – Display additional info of the
LEARN – Press and hold to start learning
programming.
commands.
LIST – Press this button to display listing.
Press it to confirm or choose a highlighted
Insert the battery to the battery
compartment to activate the remote control.
Precautionary Tips for Inserting the Battery
• Only use AA batteries
• Inserting the battery incorrectly may result in
cracking or leakage that may pose a fi re risk or
lead to personal injury.
• Dispose of the battery in accordance with local
laws and regulations.
• Keep the battery away from children and pets.
Battery Saver
Your remote automatically turns off if the buttons
are depressed more than 30 seconds.
Code Saver
You will have up to 10 minutes to change the
battery in your remote without losing codes you
have programmed. However, to avoid losing your
codes, do not press any buttons until battery is
installed in the remote.
Battery replacement
Insert two AA
batteries into the remote
control. Make sure that
you match the (+) and (-)
symbols on the battery
with the (+) and (-)
symbols inside the battery
compartment. Re-attach
the battery cover.
puteS laitinI
5
puteS
Programming for TV, STB, DVD, AUDIO, DVR,
HD, CD and AUX
Note: TV mode can be programmed for TV
codes ONLY. STB and DVD mode can be
programmed to control ANY kind of device
listed in the code list. The remote is
pre-programmed to operate VIZIO TVs under TV
mode and VIZIO Blu-Ray Players under DVD
mode.
1. Manually turn on your TV (or device you want
2. Press the TV (or device) button and hold for
5 seconds until the LED flashes twice. LED will
remain lit.
3. Find the programming code for your TV (or
device) in the code list and enter it using the
Number Buttons. The LED flashes once after
entering each digit. If the code is accepted,
the LED flashes twice after the last digit is
and then turns off.
If the code is invalid, the LED will have a long blink
and then turns off. Please repeat Steps 2 and 3
with the next code listed for the component and
manufacturer.
4. Point the remote control at the TV (or device)
and press the POWER button. The TV (or
device) should turn off.
Note:
•
If your TV (or device) does not respond, try all
the codes for your brand. If the codes do not
work, or your brand is not listed, see “Using the
smart search function, page 7.”
•
Sometimes a code listed will only include limited
functions. Try other codes that may include
more functionality.
6
to control).
7
Using the Smart Search Function
component list or the program code does
not work, you can use the remote control to
search for the correct device code.
To search for a device code:
1. Manually turn on the device.
2. Press and hold the matching device
button (TV, STB, DVD , etc) for 5 seconds
remain lit.
3. Press 9 9 1 using the Number Buttons.
is entered and LED will remain lit.
4. Point the remote control at the device,
then press the POWER button. The code
seconds during the search. Move your
OK button.
5. When the device turns off, press the OK
button within three seconds to save the
code. If the device does not respond
correctly, repeat the search procedure to
Resetting the Remote to Factory
Settings:
1. Press and hold the V button for 5
will remain lit.
2. Press 9 1 9 1 9 using the Number
Buttons
the last digit is entered and then turns
off. The remote is now reset to factory
settings.
Smart Learning
Please note:
• Your VIZIO Universal Remote can store a
total of 130 commands.
• Not all commands from all remotes can
be programmed.
• Commands cannot be assigned to the 8
device buttons (TV, STB, DVD, etc).
• You can re-program a button by following
the steps below.
Setup, cont.
8
Using the Smart Learning Mode
1. Press the device button that you wish
to program (TV, STB, DVD, etc). Then
press and hold the LEARN button for
5 seconds. The LED will light up. This
indicates the Universal Remote is in
learning mode.
2. Align the transmitter of the original
remote control with the front window of
the Universal Remote (For best results,
the remotes should be about 5cm apart
pointing to each other). The VIZIO
Universal Remote can only learn
commands from one remote at a
time. For example, you cannot teach
commands from both a TV remote and
a DVD remote.
3. Press the button on the Universal
Remote that you wish to program. When
command.
4. Press and hold a button on the original
remote until the LED light on the
The LED will then remain lit. This
indicates that it has learned the code. (If
the Universal Remote’s memory is full,
and you must delete some learned
commands.)
5. Repeat steps 3-4 until all the desired
buttons have been learned by the
Universal Remote.
6.
LEARN button
to complete the code learning. The LED
light will turn off. The Universal Remote
will automatically exit learning mode if
it is inactive for 20 seconds or longer.
Clearing a Device Button
1. To clear a device button (TV, STB, DVD,
etc) of all learned commands, press and
hold the device button for 5 seconds. The
LED will light up.
2. Press 9 9 9 1. The LED blinks twice to
indicate the device button is cleared of all
commands.
2. The remote control is not working with my
devices.
•
Move closer to the device.
•
Point the remote control directly at the
remote sensor on your device.
•
Remove any obstacles between the remote
control and the remote sensor.
•
Replace old batteries with new batteries.
•
Make sure you have pressed the correct
device button at the top of the remote.
3. The remote control does not work with my
device after programming it.
•
Set the remote control code correctly. If the
code that is listed fi rst for your device does
not work, try all the codes for your device
in the order in which they are listed in the
supplied Code List.
Telephone & Technical Support
Products are often returned due to a technical
problem rather than a defective product that may
result in unnecessary shipping charges billed
to you. Our trained support personnel can often
resolve the problem over the phone. For more
information on warranty service or repair, after
the warranty period, please contact our Support
Department at the number below. Customer
support and quality service are integral parts of
VIZIO’s commitment to service excellence.
For technical assistance contact our VIZIO
Technical Support Department via email or phone.
Email: techsupport@vizio.com (877) 698-4946
Fax: (949) 585-9563 Hours of operation: Monday -
Friday: 6 am to 9 pm Saturday – Sunday: 8 am to
4 pm Please have your VIZIO model number, and
date of purchase available before you call VIZIO.
VIZIO
39 Tesla
Irvine, CA 92618, USA
Web: www.vizio.com
Covers units purchased as “new” in United States and
Puerto Rico Only.
VIZIO provides a warranty to the original purchaser
of a new Product against defects in materials and
workmanship for a period of one year of non-commercial
usage and ninety (90) days of commercial use. If a
Product covered by this warranty is determined to be
defective within the warranty period, VIZIO will either
repair or replace the unit at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical
Support via email: TechSupport@VIZIO.com or via
phone at 877 MY VIZIO (877.698.4946) from 6:00AM to
9:00PM Monday through Friday and 8:00AM to 4:00PM
Saturday and Sunday, Pacifi c Time, or visit www.VIZIO.
com. PRE-AUTHOIRZATION MUST BE OBTAINED
BEFORE SENDING A UNIT TO A VIZIO SERVICE
CENTER. Proof of purchase in the form of a purchase
receipt or copy thereof is required to show that the
Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the
warranty period. Replacement parts and units may be
new or recertifi ed at VIZIO’s option and sole discretion.
Replacement parts and units are warranted for the
remaining portion of the original warranty or for ninety
(90) days from warranty service or replacement,
whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service
center to obtain warranty service. VIZIO is not
responsible for transportation costs to the service center,
but VIZIO will cover return shipping to the customer.
PRE-AUTHORIZATION IS REQUIRED BEFORE
SENDING ANY UNIT IN FOR WARRANTY SERVICE.
All Product returns to VIZIO’s service center must utilize
either the original blister pack and shipping material or
packaging that affords an equal degree of protection.
VIZIO Technical Support will provide instructions for
packing and shipping the covered Product to the VIZIO
service center.
ONE YEAR LIMITED WARRANTY
Maintenance & Troubleshooting
VIZIO Remote Control Precautions
• The remote control should be kept dry and away
from heat sources. Avoid humidity.
• If the Component responds erratically to the
remote control or does not respond at all, check
the battery If the battery is low or exhausted,
replace it with a fresh battery.
• When not using the remote control for a long
period of time, remove the battery.
• Do not take the battery apart, heat it, or throw it
into a fire.
• Do not subject the remote control to undue
physical stress, such as striking or dropping it.
Cleaning the Remote Control
1. Use a soft cloth for cleaning.
2. If the remote control is seriously contaminated,
use a soft cloth moistened with diluted neutral
cleaner to clean the display. Wring water out of
the cloth before cleaning to prevent water from
penetrating into the housing.
Troubleshooting
1. Remote control does not work with my TV:
•
Point the remote control directly at the
remote sensor on your TV.
•
Remove any obstacles between the remote
control and the remote sensor.
•
Replace old batteries with new batteries.
•
Press the TV button on the top of the remote
to return to the TV mode.
9
10 11 12
2. The remote control is not working with my
devices.
•
Move closer to the device.
•
Point the remote control directly at the
remote sensor on your device.
•
Remove any obstacles between the remote
control and the remote sensor.
•
Replace old batteries with new batteries.
•
Make sure you have pressed the correct
device button at the top of the remote.
3. The remote control does not work with my
device after programming it.
•
Set the remote control code correctly. If the
code that is listed fi rst for your device does
not work, try all the codes for your device
in the order in which they are listed in the
supplied Code List.
Telephone & Technical Support
Products are often returned due to a technical
problem rather than a defective product that may
result in unnecessary shipping charges billed
to you. Our trained support personnel can often
resolve the problem over the phone. For more
information on warranty service or repair, after
the warranty period, please contact our Support
Department at the number below. Customer
support and quality service are integral parts of
VIZIO’s commitment to service excellence.
For technical assistance contact our VIZIO
Technical Support Department via email or phone.
Email: techsupport@vizio.com (877) 698-4946
Fax: (949) 585-9563 Hours of operation: Monday Friday: 6 am to 9 pm Saturday – Sunday: 8 am to
4 pm Please have your VIZIO model number, and
date of purchase available before you call VIZIO.
VIZIO
39 Tesla
Irvine, CA 92618, USA
Web: www.vizio.com
Covers units purchased as “new” in United States and
Puerto Rico Only.
VIZIO provides a warranty to the original purchaser
of a new Product against defects in materials and
workmanship for a period of one year of non-commercial
usage and ninety (90) days of commercial use. If a
Product covered by this warranty is determined to be
defective within the warranty period, VIZIO will either
repair or replace the unit at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical
Support via email: TechSupport@VIZIO.com or via
phone at 877 MY VIZIO (877.698.4946) from 6:00AM to
9:00PM Monday through Friday and 8:00AM to 4:00PM
Saturday and Sunday, Pacifi c Time, or visit www.VIZIO.
com. PRE-AUTHOIRZATION MUST BE OBTAINED
BEFORE SENDING A UNIT TO A VIZIO SERVICE
CENTER. Proof of purchase in the form of a purchase
receipt or copy thereof is required to show that the
Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the
warranty period. Replacement parts and units may be
new or recertifi ed at VIZIO’s option and sole discretion.
Replacement parts and units are warranted for the
remaining portion of the original warranty or for ninety
(90) days from warranty service or replacement,
whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service
center to obtain warranty service. VIZIO is not
responsible for transportation costs to the service center,
but VIZIO will cover return shipping to the customer.
PRE-AUTHORIZATION IS REQUIRED BEFORE
SENDING ANY UNIT IN FOR WARRANTY SERVICE.
All Product returns to VIZIO’s service center must utilize
either the original blister pack and shipping material or
packaging that affords an equal degree of protection.
VIZIO Technical Support will provide instructions for
packing and shipping the covered Product to the VIZIO
service center.
ONE YEAR LIMITED WARRANTY
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects
in materials and workmanship. This warranty does
not cover, for example: cosmetic damage, normal
wear and tear, improper operation, improper voltage
supply, signal issues, damage from shipping, acts
of God, any type of customer misuse, modifi cation
or adjustments, as well as installation and set-up
issues or any repairs attempted by anyone other than
by a VIZIO authorized service center. Products with
unreadable or removed serial numbers or requiring
routine maintenance are not covered. This one year
limited warranty does not cover Products sold “AS IS”,
“FACTORY RECERTIFIED”, or by a non-authorized
reseller. THERE ARE NO EXPRESS WARRANTIES
OTHER THAN THOSE LISTED OR DESCRIBED
ABOVE. ANY IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, SHALL
BE LIMITED IN DURATION TO THE PERIOD OF TIME
SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR
ANY AND ALL LOSSES AND DAMAGES RESULTING
FROM ANY CAUSE WHATSOEVER INCLUDING
VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR
DEFECTIVE GOODS, WHETHER SUCH DEFECTS
ARE DISCOVERABLE OR LATENT, SHALL IN NO
EVENT EXCEED THE PURCHASE PRICE OF THE
DEVICE. VIZIO SHALL NOT BE RESPONSIBLE
FOR LOSS OF USE, LOSS OF INFORMATION
OR DATA, COMMERCIAL LOSS, LOST REVENUE
OR LOST PROFITS, OR OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGES. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED W
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE. THIS WARRANTY IS SUBJECT TO
CHANGE WITHOUT NOTICE. CHECK www.VIZIO.com
FOR THE MOST CURRENT VERSION.
THE TRADEMARKS SHOWN HEREIN ARE THE
PROPERTY OF THEIR RESPECTIVE OWNERS;
IMAGES USED ARE FOR ILLUSTRATION PURPOSES
ONLY. VIZIO, THE V LOGO AND WHERE VISION
MEETS VALUE AND OTHER VIZIO TRADEMARKS
ARE THE INTELLECTUAL PROPERTY OF VIZIO
INC. PRODUCT SPECIFICATIONS ARE SUBJECT TO
CHANGE WITHOUT NOTICE. © 2010 VIZIO INC. ALL
RIGHTS RESERVED.
10
11 12
Covers units purchased as “new” in United States and
Puerto Rico Only.
VIZIO provides a warranty to the original purchaser
of a new Product against defects in materials and
workmanship for a period of one year of non-commercial
usage and ninety (90) days of commercial use. If a
Product covered by this warranty is determined to be
defective within the warranty period, VIZIO will either
repair or replace the unit at its sole option and discretion.
To obtain warranty service, contact VIZIO Technical
Support via email: TechSupport@VIZIO.com or via
phone at 877 MY VIZIO (877.698.4946) from 6:00AM to
9:00PM Monday through Friday and 8:00AM to 4:00PM
Saturday and Sunday, Pacifi c Time, or visit www.VIZIO.
com. PRE-AUTHOIRZATION MUST BE OBTAINED
BEFORE SENDING A UNIT TO A VIZIO SERVICE
CENTER. Proof of purchase in the form of a purchase
receipt or copy thereof is required to show that the
Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the
warranty period. Replacement parts and units may be
new or recertifi ed at VIZIO’s option and sole discretion.
Replacement parts and units are warranted for the
remaining portion of the original warranty or for ninety
(90) days from warranty service or replacement,
whichever is greater.
Type of Service
Defective Products must be sent to a VIZIO service
center to obtain warranty service. VIZIO is not
responsible for transportation costs to the service center,
but VIZIO will cover return shipping to the customer.
PRE-AUTHORIZATION IS REQUIRED BEFORE
SENDING ANY UNIT IN FOR WARRANTY SERVICE.
All Product returns to VIZIO’s service center must utilize
either the original blister pack and shipping material or
packaging that affords an equal degree of protection.
VIZIO Technical Support will provide instructions for
packing and shipping the covered Product to the VIZIO
service center.
ONE YEAR LIMITED WARRANTY
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects
in materials and workmanship. This warranty does
not cover, for example: cosmetic damage, normal
wear and tear, improper operation, improper voltage
supply, signal issues, damage from shipping, acts
of God, any type of customer misuse, modifi cation
or adjustments, as well as installation and set-up
issues or any repairs attempted by anyone other than
by a VIZIO authorized service center. Products with
unreadable or removed serial numbers or requiring
routine maintenance are not covered. This one year
limited warranty does not cover Products sold “AS IS”,
“FACTORY RECERTIFIED”, or by a non-authorized
reseller. THERE ARE NO EXPRESS WARRANTIES
OTHER THAN THOSE LISTED OR DESCRIBED
ABOVE. ANY IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, SHALL
BE LIMITED IN DURATION TO THE PERIOD OF TIME
SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR
ANY AND ALL LOSSES AND DAMAGES RESULTING
FROM ANY CAUSE WHATSOEVER INCLUDING
VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR
DEFECTIVE GOODS, WHETHER SUCH DEFECTS
ARE DISCOVERABLE OR LATENT, SHALL IN NO
EVENT EXCEED THE PURCHASE PRICE OF THE
DEVICE. VIZIO SHALL NOT BE RESPONSIBLE
FOR LOSS OF USE, LOSS OF INFORMATION
OR DATA, COMMERCIAL LOSS, LOST REVENUE
OR LOST PROFITS, OR OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGES. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED W
ARRANTY LASTS OR THE EXCLUSION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE. THIS WARRANTY IS SUBJECT TO
CHANGE WITHOUT NOTICE. CHECK www.VIZIO.com
FOR THE MOST CURRENT VERSION.
THE TRADEMARKS SHOWN HEREIN ARE THE
PROPERTY OF THEIR RESPECTIVE OWNERS;
IMAGES USED ARE FOR ILLUSTRATION PURPOSES
ONLY. VIZIO, THE V LOGO AND WHERE VISION
MEETS VALUE AND OTHER VIZIO TRADEMARKS
ARE THE INTELLECTUAL PROPERTY OF VIZIO
INC. PRODUCT SPECIFICATIONS ARE SUBJECT TO
CHANGE WITHOUT NOTICE. © 2010 VIZIO INC. ALL
RIGHTS RESERVED.
11
12
Loading...