Congratulations on your new VIZIO VF551XVT television purchase. Thank
you for your support. For maximum benefit of your HDTV, please read
these instructions before making any adjustments, and retain them for
future reference. We hope you will experience many years of enjoyment
from your new VIZIO HDTV High Definition Television.
For assistance, please call (877) 668-8462 or e-mail us at
www.vizio.com.
To purchase or inquire about accessories and installation services for your
VIZIO HDTV, please visit our website at
www.vizio.com or call toll free at
(888) 849-4623.
We recommend you register your VIZIO HDTV either at our website
www.VIZIO.com or fill out and mail your registration card. For peace of
mind and to protect your investment beyond the standard warranty, VIZIO
offers on-site extended warranty service plans. These plans give
additional coverage during the standard warranty period. Visit our website
or call us to purchase a plan.
Write down the serial number located on the back of your HDTV.
__ __ __ __ __ __ __ __ __ __ __ __ __
Purchase Date _____________________
VIZIO is a registered trademark of VIZIO, Inc. dba V, Inc.
HDMI logo and “High Definition Multimedia Interface” are registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
TruSurround HD and TruVolume technologies are incorporated under license from SRS Labs, Inc.
Your HDTV is designed and manufactured to operate within defined design limits, and misuse
may result in electric shock or fire. To prevent your HDTV from being damaged, the following
rules should be observed for the installation, use, and maintenance of your HDTV. Read the
following safety instructions before operating your HDTV. Keep these instructions in a safe place
for future reference.
To reduce the risk of electric shock or component damage, switch off the power before
connecting other components to your HDTV.
Unplug the power cord before cleaning your HDTV. A damp cloth is sufficient for cleaning your
HDTV. Do not use a liquid or a spray cleaner for cleaning your HDTV. Do not use abrasive
cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving your HDTV from an area of low temperature to an area of high temperature,
condensation may form in the housing. Wait before turning on your HDTV to avoid causing fire,
electric shock, or component damage.
Use only with the cart, stand, tripod, bracket, or table specified by manufacturer or sold with your
HDTV. When a cart is used, use caution when moving the cart/HDTV combination to avoid injury
from tip-over. Do not place your HDTV on an unstable cart, stand, or table. If your HDTV falls, it
can injure a person and cause serious damage to your HDTV. Use only a cart or stand
recommended by the manufacturer or sold with your HDTV.
A distance of at least 3 feet should be maintained between your HDTV and any heat source, such
as a radiator, heater, oven, amplifier etc. Do not install your HDTV close to smoke. Operating
your HDTV close to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of your HDTV and to protect it from overheating, be sure these openings are
not blocked or covered. Do not place your HDTV in a bookcase or cabinet unless proper
ventilation is provided.
Never push any object into the slots and openings on your HDTV cabinet. Do not place any
objects on the top of your HDTV. Doing so could short circuit parts causing a fire or electric shock.
Never spill liquids on your HDTV.
Your HDTV should be operated only from the type of power source indicated on the label. If you
are not sure of the type of power supplied to your home, consult your dealer or local power
company.
Do not apply pressure or throw objects at your HDTV. This may compromise the integrity of the
display. The manufacturer’s warranty does not cover user abuse or improper installations.
The power cord must be replaced when using different voltage than the voltage specified. For
more information, contact your dealer.
Your HDTV is equipped with a three-pronged grounded plug (a plug with a third grounding
pin). This plug will fit only into a grounded power outlet. This is a safety feature. If
your outlet does not accommodate the three-pronged, have an electrician install
the correct outlet, or use an adapter to ground your HDTV safely. Do not defeat the safety purpose of the grounded plug.
When connected to a power outlet, power is always flowing into your HDTV. To
totally disconnect power, unplug the power cord.
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-isolated, dangerous
voltage within the inside of your HDTV that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and servicing instructions in the literature
accompanying your HDTV.
2
www.VIZIO.com
VIZIO VF551XVT User Manual
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wall socket should be installed near your HDTV and easily accessible.
Only power of the marked voltage can be used for your HDTV. Any other voltage than the
specified voltage may cause fire or electric shock
Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power
cord during electrical storms.
Unplug your HDTV during a lightning storm or when it will not be used for long period of time.
This will protect your HDTV from damage due to power surges.
Do not attempt to repair or service your HDTV yourself. Opening or removing the back cover may
expose you to high voltages, electric shock, and other hazards. If repair is required, contact your
dealer and refer all servicing to qualified service personnel.
Keep your HDTV away from moisture. Do not expose your HDTV to rain or moisture. If water
penetrates into your HDTV, unplug the power cord and contact your dealer. Continuous use in
this case may result in fire or electric shock.
Do not use your HDTV if any abnormality occurs. If any smoke or odor becomes apparent, unplug
the power cord and contact your dealer immediately. Do not try to repair your HDTV yourself.
Avoid using dropped or damaged appliances. If your HDTV is dropped and the housing is
damaged, the internal components may function abnormally. Unplug the power cord immediately
and contact your dealer for repair. Continued use of your HDTV may cause fire or electric shock.
Do not install your HDTV in an area with heavy dust or high humidity. Operating your HDTV in
environments with heavy dust or high humidity may cause fire or electric shock.
Follow instructions for moving your HDTV. Ensure that the power cord and any other cables are
unplugged before moving your HDTV.
When unplugging your HDTV, hold the power plug, not the cord. Pulling on the power cord may
damage the wires inside the cord and cause fire or electric shock. When your HDTV will not be
used for an extended period of time, unplug the power cord.
To reduce risk of electric shock, do not touch the connector with wet hands.
Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to
leak which can damage the remote control or injure the operator.
If any of the following occurs, contact the dealer:
o The power cord fails or frays.
o Liquid sprays or any object drops into your HDTV.
o Your HDTV is exposed to rain or other moisture.
o Your HDTV is dropped or damaged in any way.
o The performance of your HDTV changes substantially.
Version 7/17/2009 3
www.VIZIO.com
VIZIO VF551XVT User Manual
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage surges and
static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during
a lightning storm or when it is left
unattended or unused for long periods
of time, unplug the TV from the wall
outlet and disconnect the antenna or
cable system.
Power Lines
Do not locate the antenna near
overhead light or power circuits, or
where it could fall into such power
lines or circuits.
Remember, the screen of the coaxial cable is intended to be connected to earth in the building
installation.
4
www.VIZIO.com
VIZIO VF551XVT User Manual
Advisory of the DTV Transition
The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local
television stations may switch sooner. After the switch, analog-only television sets that receive TV
programming through an antenna will need a converter box to continue to receive over-the-air TV. Watch
your local stations to find out when they will turn off their analog signal and switch to digital-only
broadcasting. Analog-only TVs should continue to work as before to receive low power, Class A or
translator television stations and with cable and satellite TV services, gaming consoles, VCRs, DVD
players, and similar products.
For additional information, please contact the parties listed below, as appropriate:
NTIA (National Telecommunications and Information Administration)
http://www.ntia.doc.gov/
1-888-DTV-2009
Listings of US Television Stations
http://www.high-techproductions.com/usTVstations.htm
Note: Your VIZIO HDTV is capable of receiving Digital Broadcasts, and no Digital Converter Box is
required.
Version 7/17/2009 5
www.VIZIO.com
VIZIO VF551XVT User Manual
Table of Contents
Important Safety Instructions..................................................................................................................... 2
Television Antenna Connection Protection ...............................................................................................4
Advisory of the DTV Transition.................................................................................................................. 5
Setting Up Your HDTV ............................................................................................................................10
Wall Mounting your HDTV....................................................................................................................... 10
Attaching the safety strap........................................................................................................................ 11
CHAPTER 1 BASIC CONTROLS AND CONNECTIONS.......................................................................... 12
Front Panel ..............................................................................................................................................12
Side Panel Controls................................................................................................................................. 12
Sort By .................................................................................................................................................31
Info ....................................................................................................................................................... 32
Music Settings ......................................................................................................................................... 32
Sort By .................................................................................................................................................32
Play Mode ............................................................................................................................................32
Info ....................................................................................................................................................... 32
Video Settings .........................................................................................................................................33
Sort By .................................................................................................................................................33
Play Mode ............................................................................................................................................33
Info ....................................................................................................................................................... 33
CHAPTER 4 USING YOUR HDTV THE FIRST TIME................................................................................ 34
Program Information................................................................................................................................39
CHAPTER 5 ADVANCED ADJUSTMENT OF HDTV................................................................................ 40
Using the On Screen Display (OSD) ....................................................................................................... 40
Picture Menu ...........................................................................................................................................41
Audio Menu .............................................................................................................................................43
Digital Audio Out .................................................................................................................................. 43
TV Menu ..................................................................................................................................................45
Auto Search ......................................................................................................................................... 45
Time Zone............................................................................................................................................ 45
Setup Menu ............................................................................................................................................. 46
Language .............................................................................................................................................46
Tech Logo ............................................................................................................................................47
CC (Closed Caption)............................................................................................................................ 48
H/V Position ......................................................................................................................................... 49
System Info ..........................................................................................................................................51
System Reset....................................................................................................................................... 51
Your HDTV and its accompanying accessories are carefully packed in a cardboard carton that has been
designed to protect it from transportation damage. Once you have opened the carton, check that your
HDTV is in good condition and that all of the contents are included.
The screen can easily be scratched or broken, so handle your HDTV gently and never place your HDTV
with the screen facing downwards on a surface without protective padding.
IMPORTANT: Save the carton and packing material for future shipping.
Package Contents
VIZIO VF551XVT
VIZIO remote control VUR8M
AA batteries for the remote control (2)
Power cord
Safety Strap
Cleaning Cloth
This user manual
Quick Setup Guide
Registration Card
Additional certified accessories for your HDTV are sold separately:
Wall mounts
High Definition cables
Extra or replacement remote control
VIZIO also offers installation services and extended warranty services for your HDTV.
To purchase or inquire about additional accessories and services for your VIZIO HDTV, visit our web site
at www.VIZIO.com or call us toll free at 888-VIZIOCE (888-849-4623)
Caution:
of the display. The manufacturer’s warranty does not cover user abuse or improper installations.
Do not apply pressure or throw objects at your HDTV. This may compromise the integrity
Version 7/17/2009 9
www.VIZIO.com
VIZIO VF551XVT User Manual
Setting Up Your HDTV
Note:We strongly recommend that two people perform the setup and assembly due to the weight and
size of the TV.
Read this user manual carefully before installing your HDTV.
The power consumption of your HDTV is about 154W (AVG). Use the included power cord. When
an extension cord is required, use one with the correct power rating. The cord must be grounded
and the grounding feature must not be compromised.
Your HDTV should be installed on a flat surface to avoid tipping.
For proper ventilation, you must allow space between the back of your HDTV and the wall.
If you want to mount your HDTV on the wall, see below for additional information.
Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Contact VIZIO for more information on these services at
888-VIZIOCE (888-849-4623) or www.VIZIO.com.
Wall Mounting your HDTV
Your HDTV can be mounted on the wall for viewing.
If you choose to mount your HDTV on the wall,
follow the instructions below.
Remove the stand:
a. Disconnect the cables from your HDTV.
b. Place your HDTV face down on a soft, flat
surface to prevent damage to the screen.
c. Remove the eight (8) screws holding the stand,
then pull downward on the stand and lift the
stand off your HDTV.
Note: Use M8x 25M 1.25 pitch screws for wall
mounting.
10
www.VIZIO.com
VIZIO VF551XVT User Manual
Attaching the safety strap
When your HDTV is not mounted on the wall, use the included safety strap to attach the HDTV to the wall
to reduce the chance of the HDTV being pulled over. The Safety Strap should be used with common
sense practice such as ensuring that children (or adults) do not climb up, grabbing the top of the HDTV
and pulling it onto themselves.
1. Attach one end of the strap to the wall:
If you have a drywall finish attach it to a stud, using a
washer underneath the screw head.
If you have a solid wall you should use a lag bolt, again
using a washer under the nut.
2. Attach the other end of the Safety Strap to
one of the upper wall mounting holes on
the back of the HDTV, using a washer
under the screw head.
Version 7/17/2009 11
www.VIZIO.com
VIZIO VF551XVT User Manual
Chapter 1 Basic Controls and Connections
Front Panel
POWER ‘VIZIO’ LIGHT– The VIZIO name lights
white when powered on and orange when
powered off.
REMOTE CONTROL SENSOR – Point the remote
control directly at this window for the best
response to the remote signal.
TECH LOGO – Lights up in sequence highlighting
the technology features of the TV.
Side Panel Controls
POWER (
again to turn the HDTV off.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is active,
pressing this button will proceed to the next level.
INPUT (ENTER) –
Repeated pressing of this button steps through the input sources in the
If a sub-menu is active, pressing this button will return to the previous menu
Additionally, when the OSD is active, this button confirms the menu function to be
adjusted.
CH
▲/ ▼ – Use these buttons to step up or down the TV channels. While the OSD
is active, these buttons function as up and down controls in the OSD menus.
VOL
▲/ ▼ – Use these buttons to increase or decrease the speaker volume. While
the OSD is active, these buttons function as left and right controls in the OSD menus.
) – Switch the HDTV on by pressing the button once. Press the button
following sequence: TV, AV1, AV2, Component1, Component2, RGB, HDMI1,
HDMI2, HDMI3, HDMI4 and HDMI SIDE. Once you have stepped through the
entire sequence, you will return to the beginning.
level.
12
www.VIZIO.com
VIZIO VF551XVT User Manual
Rear Panel Connections
1. HDMI 1, 2 & 3 – Connect digital video devices such as DVD multimedia players or set top box
through these all digital connectors. There is an additional HDMI port on the side of the HDTV.
2. RGB PC – Connect the video and audio from a computer here. A cable with a 1/8” mini plug
stereo connector at the end connecting to the TV is needed if sound is also transmitted with this
signal.
3. S-VIDEO/AV1 – Connect composite or S-Video video devices, such as a VCR or video game.
Use the white and red connectors to connect the external audio from the same source. There is
an additional AV port on the side of the HDTV.
4. DTV/TV – Connect to an antenna or digital cable (not a cable box) for Digital TV. For digital TV
stations in your area visit www.antennaweb.org.
5. AUDIO OUT –
a. (OPTICAL) The audio associated with the programming will be available on the SPDIF
Optical connector for connection to your home theater system.
b. (ANALOG L/R) Connect the audio from the HDTV to an external device, such as a home
theater system, external amplifier or stereo. Speakers can not be connected directly here.
6. HDMI 4 - Connect another digital video device such as a DVD multimedia player or set top box
through this all digital connector. For users who want to connect to a DVI enabled device, use a
DVI-HDMI cable and connect the analog audio output of the device to the L+R AUDIO here.
Your VIZIO Certified HDMI and HDMI-DVI cables are available for purchase from
www.VIZIO.com or by calling 888-VIZIOCE (888-849-4623).
7. COMPONENT 1 (YPb/CbPr/Cr with Audio L/R) – Connect component video devices such as
a DVD Player or set top box here. There is an additional Component port on the side of the
HDTV.
Version 7/17/2009 13
www.VIZIO.com
VIZIO VF551XVT User Manual
Right-Side Panel Connection
1. AV2 – Connect the secondary source for composite
video devices, such as a VCR or video game. Use
the white and red connectors to connect the external
audio from the same source, and then use the yellow
connector to connect the external video from the
same source.
Note: The red and white audio connectors are shared
between AV2 and COMPONENT2.
2. COMPONENT2 (YPb/CbPr/Cr with Audio L/R) -
Connect the secondary source for component video
devices such as a DVD Player or set top box here.
Note: The red and white audio connectors are shared
between AV2 and COMPONENT2.
3. HDMI SIDE - Connect another digital video device
such as a DVD multimedia player or set top box
through this all digital connector.
4. MEDIA PORT – Insert a FAT/FAT32 formatted USB
drive to view pictures, listen to music, or watch
movies.
14
www.VIZIO.com
VIZIO VF551XVT User Manual
VIZIO Remote Control
In addition to your HDTV, your Vizio remote control is programmable and supports up to three different
devices: a DVD player, a Home Theater System or Audio Amplifier, and a Cable or Set-Top Box. See
“Programming the VIZIO Universal Remote Control” at the back of this manual for step-by-step
instructions on how to program the remote.
SET – This button starts all programming of the Remote Control.
Remote LED – Blinks when the remote operates.
POWER (
) – Press this button to turn the TV on from the Standby
mode. Press it again to return to the Standby mode.
DVD – This button selects a DVD player that has been programmed to work
with this remote.
AUDIO – This button selects a Home Theater System or Audio Amplifier
that has been programmed to work with this remote.
CABLE – This button selects a cable or satellite set-top box that has been
programmed to work with this remote.
TV – Press this button to return TV mode. If the remote is not working, press
this button to return the functions back to TV.
NUMBER BUTTON PAD – Use these buttons to select a channel or enter a
password.
INPUT – Repeatedly pressing this button will step you through the input
sources in the following sequence: TV, AV1, AV2, Component1,
Component2, RGB, HDMI1, HDMI2, HDMI3, HDMI4 and HDMI SIDE. Once
you have stepped through the entire sequence, you will return to the
beginning.
- (DASH) – When selecting a digital channel directly, use this button
between the main and sub-channels. For example, channel 28-2 would be
selected by the button sequence 2, 8, DASH, 2.
MENU – Use this button to open the On-Screen Display (OSD) menu. Press
repeatedly to go back to the previous menu screen or to return to your
program.
INFO – This button displays program information.
OK
– Press this button to display the Channel List. In Multi Media mode,
press this button to select folders and files and to play/pause a slideshow,
playing music, or movies.
▲▼◄ ►
-- These buttons are used to navigate the OSD menu. They will
also be used as value settings when the slide bar is shown on the screen
and option settings to turn a feature off or on.
GUIDE – This button displays detailed program information when viewing a
digital TV program.
EXIT – Press this button to exit from the On-Screen Display (OSD) menu.
VOL ▲/▼ – This button turns the volume up or down.
LAST – This button recalls the previously viewed channel.
MUTE – This button turns the sound on and off.
CH ▲/▼ – This button changes the channels up or down.
Version 7/17/2009 15
www.VIZIO.com
VIZIO VF551XVT User Manual
PIP/A – Pressing this button will activate the picture-in-picture feature. The screen will display the subscreen in the corner over the main screen. Pressing it again will display the POP (Picture Outside Picture)
option. This button also performs the same function as the “A” button on your Cable or Satellite box when
using the remote to control your pre-programmed Cable/Satellite Box DVR.
P.SIZE/B – Repeatedly press this button to set the size of the PIP screen to
small, medium, or large. This button also performs the same function as the “B”
button on your Cable or Satellite box when using the remote to control your preprogrammed Cable/Satellite Box DVR.
P.INPUT/C – Press the button to choose the input source for the PIP screen.
This button also performs the same function as the “C” button on your Cable or
Satellite box when using the remote to control your pre-programmed
Cable/Satellite Box DVR.
P.CH/D – Press this button change the channels in the PIP screen when TV is
selected as PIP Input. This button also performs the same function as the “D”
button on your Cable or Satellite box when using the remote to control your preprogrammed Cable/Satellite Box DVR.
TV INPUT – Press this button to select TV mode.
AV INPUT – Press this button to select AV1 and AV2 (either Composite or S-
Video) input.
COMPONENT INPUT – Press this button to select Component 1 and
Component 2 inputs.
HDMI INPUT – Press this button to select the HDMI input. By pressing it
repeatedly you will go through all HDMI inputs in sequence.
WIDE/RECORD – This button cycles through the available screen formats:
Normal, Panoramic, Zoom, Full, and Stretch. This button also begins recording
when using the remote to control your pre-programmed DVD Player or
Cable/Satellite Box DVR.
SLEEP/PAUSE – This button cycles through the sleep options from 30-120
minutes. This button also pauses playback when using the remote to control
your pre-programmed DVD Player or Cable/Satellite Box DVR.
MTS/PLAY – This button selects Stereo, SAP, or Mono in standard TV mode
and alternate audio channels, where available when viewing digital channels.
This button also starts Playback when using the remote to control your preprogrammed DVD Player or Cable/Satellite Box DVR.
CC/STOP – Repeatedly press this button to select OFF, CC1, CC2, CC3, or
CC4 in standard TV mode and Service1 through Service6 when viewing a digital
channel. This button also Stops playback/recording when using the remote to
control your pre-programmed DVD Player or Cable/Satellite Box DVR.
MEDIA/PREV – Press this button to view pictures, listen to music, or watch
movies on a USB drive connected to the Multi Media port on the side of the
HDTV. This button also skips to the previous track when using the remote to
control your pre-programmed DVD Player or Cable/Satellite Box DVR.
FREEZE/REV – Press this button to “Freeze-Frame” the current screen. Press this button again to
continue playing. This button also reverses playback when using the remote to control your preprogrammed DVD Player or Cable/Satellite Box DVR.
AUDIO/FF – Press this button to switch the audio from the main screen to the sub-screen while in PIP or
POP mode. This button also fast forwards playback when using the remote to control your preprogrammed DVD Player or Cable/Satellite Box DVR.
SWAP/NEXT– While in PIP/POP mode; pressing SWAP will switch the displays from the main screen to
the sub-screen or vice versa. This button also skips to the next chapter when using the remote to control
your pre-programmed DVD Player or Cable/Satellite Box DVR.
16
www.VIZIO.com
VIZIO VF551XVT User Manual
Insertion of Batteries in the Remote Control
Insert two AA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the
batteries with the (+) and (-) symbols inside the battery compartment. Re-attach the battery cover.
Precautionary Tips for Inserting the Batteries:
Only use the specified AA batteries.
Do not mix new and old batteries. This may result in
cracking or leakage that may pose a fire risk or lead to
personal injury.
Inserting the batteries incorrectly may also result in
cracking or leakage that may pose a fire risk or lead to
personal injury.
Dispose of the batteries in accordance with local laws and
regulations.
Keep the batteries away from children and pets.
Remote Control Range
Point the remote control at the remote control sensor to transmit the commands.
Do not place any obstacles between the remote control and the receiver window.
The effective range of the remote control is approximately 30 feet (9.1 meters) from the front of the
receiver window, 30° to the left and right, 20° up and down.
VIZIO Remote Control Precautions
The remote control should be kept dry and away from heat sources. Avoid humidity.
If the TV responds erratically to the remote control or does not respond at all, check the batteries. If the
batteries are low or exhausted, replace them with fresh batteries.
When not using the remote control for a long period of time, remove the batteries.
Do not take the batteries apart, heat them, or throw them into a fire.
Do not subject the remote control to undue physical stress, such as striking or dropping it.
Do not attempt to clean the remote control with a volatile solvent. Wipe it with a clean, damp cloth.
Version 7/17/2009 17
www.VIZIO.com
VIZIO VF551XVT User Manual
Chapter 2 Connecting Equipment
Which Video Connection Should I Use?
The VIZIO HDTV has six different ways to connect your video equipment from a basic connection to the
most advanced for digital displays.
Connection
Quality (type)
Best
(digital)
Best
(digital)
- - - - - - - - - - -
Compatible
(analog)
Best
(analog)
Better
(analog)
Connector Description
HDMI provides an interface between any audio/video source, such as
a set-top box, DVD player, or A/V receiver and a digital television
(DTV), over a single cable.
Connect a digital or analog antenna cable or coaxial cable to watch TV
programming.
RGB PC (VGA) – This is most commonly used for PC input.
Component - Component video provides a sharper image than
composite video and S-video because the three video signals are
transmitted via three separate channels.
S-Video (AV1) - Combining the three video signals into two channels,
S-Video provides a sharper image than Composite video, but is not as
Compatible
(analog)
18
good as Component video.
Composite (AV1 & 2) - All three video signals are combined into one
channel, thus making the image less sharp than Component or
S-Video.
www.VIZIO.com
VIZIO VF551XVT User Manual
Connecting Your Cable or Satellite Box
You have four options for connecting your cable or satellite box to your HDTV: HDMI, Component,
Composite, or Coax (RF). Based on your home theater configuration, you can decide which option is the
right one for you. Refer to your set-top box user manual for more information about the video output
requirements or consult your cable or satellite operator.
Using HDMI (Best)
Cable and Satellite Boxes that have an HDMI digital interface should be connected to the HDMI input of
the HDTV for optimal results.
Note: To maintain the display quality, use a VIZIO certified HDMI cable. This cable is available in 6, 15,
and 30 foot lengths. See www.vizio.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
SET TOP BOX
1. Turn off the power to the HDTV and HDTV Set-Top Box.
2. Connect an HDMI cable to the HDMI output of your HDTV Set-Top Box and the other end to an
HDMI input on the back or side of the HDTV.
3. Turn on the power to the HDTV and HDTV Set-Top Box.
4. Select HDMI 1, HDMI 2, HDMI 3, HDMI 4 or HDMI SIDE using the INPUT button on the remote
control, or directly by pressing the HDMI button on the remote control.
Note:
The HDMI input on the HDTV supports High-bandwidth Digital Content Protection (HDCP).
HDCP encrypts the transmission between the video source and the digital display for added
security and protection.
If you are already using the HDMI1 input for another device, or you do not want to use the HDMI1
input for the Set-Top Box, you can connect the Set-Top Box to another HDMI connection.
Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Version 7/17/2009 19
www.VIZIO.com
VIZIO VF551XVT User Manual
HDMI Connections for Cable or Satellite Boxes with DVI
SET TOP BOX
1. Turn off the power to the HDTV and HDTV Set-Top Box.
2. Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end
to the HDMI 4 input on the back of the HDTV.
3. Using an audio cable, connect the cable to the audio output connectors associated with the
DVI output on your HDTV Set-Top Box and connect the other end to the audio connectors
associated with the HDMI input on the back of the HDTV.
4. Turn on the power to the HDTV and HDTV Set-Top Box.
5. Select HDMI 4 using the INPUT button on the remote control, or directly by pressing the
HDMI button on the remote control.
Note:
The HDMI input on the HDTV supports High-bandwidth Digital Content Protection (HDCP).
HDCP encrypts the transmission between the video source and the digital display for added
security and protection.
Refer to your HDTV Set-Top Box user manual for more information about the video output
requirements of the product or consult your cable or satellite operator.
Using Component Video (Better)
SET TOP BOX
1. Turn off your HDTV and set-top box.
2. Connect the component cables (green, blue, and red) from your set-top box to the
COMPONENT jacks on the back or side of your HDTV.
3. Connect the audio cables (white and red) from your set-top box to the adjacent
COMPONENTL and RAudio jacks on the back or side of your HDTV.
4. Turn on your HDTV and set-top box.
5. Select COMPONENT 1 or COMPONENT 2 using the INPUT button on the remote control, or
directly by pressing the COMPONENT button on the remote control.
20
www.VIZIO.com
VIZIO VF551XVT User Manual
Using S-Video (Compatible)
SET TOP BOX
1. Turn off your HDTV and set-top box.
2. Connect the S-VIDEO cable from your set-top box to the S-VIDEO jack on the back of your HDTV.
3. Connect the audio cables (white and red) on your set-top box to the corresponding L and R AUDIO jacks on the back of your HDTV.
4. Turn on your HDTV and set-top box.
5. Press AV on the remote control to view the content.
Using Composite Video (Compatible)
SET TOP BOX
1. Turn off your HDTV and set-top box.
2. Connect the video cable (yellow) from your set-top box to the AV jack (yellow) on the back of your
HDTV.
3. Connect the audio cables (white and red) on your set-top box to the corresponding L and R AUDIO jacks on the back of your HDTV.
4. Turn on your HDTV and set-top box.
5. Select AV1 using the INPUT button on the remote control, or directly by pressing the AV button
on the remote control.
Using Coaxial (Antenna) (Compatible)
SET TOP BOX
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your antenna or digital cable to the DTV/TV
CABLE/ANTENNA connector on the back of the HDTV.
3. Turn on the power to the HDTV.
4. Select TV using the INPUT button on the remote control, or directly by pressing the TV button
on the remote control.
Version 7/17/2009 21
www.VIZIO.com
VIZIO VF551XVT User Manual
Connecting Coaxial (RF)
Using Your Antenna or Digital Cable for Standard TV or Digital TV
CABLE BOX
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your antenna or cable to the DTV/TV
CABLE/ANTENNA connector on the back of the HDTV
3. Turn on the power to the HDTV.
4. Select TV using the INPUT button on the remote control, or directly by pressing the TV button
on the remote control.
Using the Antenna or Cable through Your VCR
VCR
1. Turn off the power to the HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to
the DTV/TV CABLE/ANTENNA connector on the back of the HDTV.
3. Turn on the power to the HDTV and VCR.
4. Select TV using the INPUT button on the remote control, or directly by pressing the TV button
on the remote control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of
your VCR.
22
www.VIZIO.com
VIZIO VF551XVT User Manual
Connecting Your DVD Player
You have several options for connecting your DVD player to your HDTV: HDMI, Component, S-Video and
Composite (AV) inputs. Based on your home theater configuration, you can decide which option is the
right one for you.
Using HDMI (Best)
CD DVD
For optimal results, DVD players that have a digital interface such as HDMI should be connected to the
HDMI input on your HDTV.
1. Turn off your HDTV and DVD player.
2. Connect a HDMI cable to the HDMI output of your DVD player and the other end to an HDMI
input on the back of the HDTV.
3. Turn on the power to the HDTV and your DVD player.
4. Select HDMI 1, HDMI 2, HDMI 3, HDMI 4 or HDMI SIDE using the INPUT button on the
remote control, or directly by pressing the HDMI button on the remote control.
HDMI Connections for DVD Players with DVI
CD DVD
1. Turn off your HDTV and DVD player.
2. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the
HDMI 4 Input on the back of the HDTV.
3. Connect the audio cables (white and red) from the DVI audio output jacks on the DVD player
to the adjacent HDMI 4L and RAUDIO jacks on the back of the HDTV.
4. Turn on the power to the HDTV and your DVD player.
5. Select HDMI 4 using the INPUT button on the remote control, or directly by pressing the
HDMI button on the remote control.
Note: To maintain the display quality, use a VIZIO certified HDMI cable. This cable is available in 6, 15,
and 30 foot lengths. See www.vizio.com or call 1-888-VIZIOCE (1-888-849-4623) for details.
Version 7/17/2009 23
www.VIZIO.com
Loading...
+ 53 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.