Your Unit is designed and manufactured to operate within dened design limits, and misuse may result in electric shock or re. To prevent your Unit
from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions
before operating your Unit. Keep these instructions in a safe place for future reference.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the
apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
• To reduce the risk of electric shock or component damage, switch o the power before connecting other components to your Unit.
• Unplug the power cord before cleaning your Unit. A damp cloth is sucient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not
use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure compatibility.
• When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before
turning on your Unit to avoid causing re, electric shock, or component damage.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it
from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is
provided.
• Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the top of your Unit. Doing so could short
circuit parts causing a re or electric shock. Never spill liquids on your Unit.
• Never use the subwoofer in the upright, vertical position without installing the legs
• Do not block the subwoofer ports. Allow for 1-2 inches of space around all sides for ventilation.
• WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). With continued
English - ii
exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable
discomfort.
• When connected to a power outlet, power is always owing into your Unit. To totally disconnect power, unplug the power cord.
• Do not overload power strips and extension cords. Overloading can result in re or
electric shock.
• The wall socket should be located near your Unit and be easily accessible
• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and
contact your dealer. Continuous use in this case may result in re or electric shock.
• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer
immediately. Do not try to repair your
unit yourself.
• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally.
Unplug the power cord immediately and contact your dealer for repair. Continued use of your Unit may cause re or electric shock.
• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may
cause re or electric shock.
• Ensure that the power cord and any other cables are unplugged before moving your Unit.
• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause re or
electric shock. When your Unit will not be used for an extended period of time, unplug the power cord.
• To reduce risk of electric shock, do not touch the connector with wet hands.
• Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote
control or injure the operator.
• See the important note and rating located on the back of the unit.
• WARNING - This equipment is not waterproof. To prevent a re or shock hazard, do not place any container lled with liquid near the equipment
(such as a vase or ower pot) or expose it to dripping, splashing, rain, or moisture.
• CAUTION - Danger of explosion or re if batteries are mistreated. Replace only with the same or specied type.
• Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or
dispose of it in re.
• Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
The lighting ash with arrowhead symbol
within an equilateral triangle is intended
to alert the user to the presence of not
isolated dangerous voltage within the
product that may be sucient magnitude
to constitute a risk of shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
servicing instructions in the literature
accompanying the appliance.
Warning: This equipment is a Class II or
double insulated electrical appliance. It has
been designed in such a way that it does
not require a safety connection to electrical
earth.
Using the Remote ............................................................................................................................................21
Using your tablet or Smartphone as a Remote ............................................................................................22
Connecting with HDMI ....................................................................................................................................24
LED Indicators ..................................................................................................................................................26
Programming the Sound Bar .........................................................................................................................29
Using Button Combinations ...........................................................................................................................30
Pairing your Smartphone or Tablet ...............................................................................................................31
Getting started with Google Cast™ ................................................................................................................32
How to cast content ..................................................................................................................................32
Getting started with the VIZIO SmartCast App .............................................................................................33
Selecting a SmartCast device ....................................................................................................................34
Creating an Audio Group ................................................................................................................................35
Bluetooth Pairing .............................................................................................................................................36
Using Bluetooth mode ....................................................................................................................................37
Re-Linking the Slim subwoofer with the Sound Bar .................................................................................... 38
Wall-Mounting the Sound Bar ........................................................................................................................41
Wall-Mounting the Satellite Speakers ...........................................................................................................43
Help & Troubleshooting ..................................................................................................................................48
Your new VIZIO Sound Bar is part of the all-new collection of home theater displays, sound
bars and home audio speakers that can all be controlled by one ingenious app: the VIZIO
SmartCast app.
With the app, you can browse online radio, music and more from multiple sources or apps in
one view, without having to switch back and forth between those apps or sources. And then
just tap to cast the content to your VIZIO Sound Bar - from anywhere in your home. It works
over WiFi, so you can control your VIZIO Sound Bar from any room, and keep using your
smartphone or tablet to continue browsing, play games, text or even watch another show,
without disrupting what’s playing on your sound bar. With VIZIO SmartCast, what you love
doesn’t change, but how you experience it will never be the same.
Now let’s get you into setup so you can start casting!
™
!
English - 7
English - 7
CONTROLS & CONNECTIONS
Back of Sound Bar
OPTICAL
Digital Optical Audio In
DIGITAL
Coaxial In
English - 8
Power Port
3.5mm In
Analog Audio In
(Stereo 3.5mm)
HDMI OUT
HDMI Out (ARC)
USB*
USB In
HDMI IN
HDMI IN
* Supports .WAV le format playback only.
Ethernet
Ethernet In
English - 9
Power Press to
turn sound bar
on or o.
English - 10
Volume Increase or decrease the
loudness of the audio.
Bluetooth Input Hold to pair.
(See ‘Bluetooth Pairing’ for more information.)
Input Press to change the audio
source.
Top of Sound Bar
Back of Slim Subwoofer
Back of Satellite Speaker
Power Port
Power Switch
Pairing Button
LED Indicator
Satellite Speaker Ports
(Connects to Satellite Speakers)
Satellite Speaker Port
(Connects to Slim subwoofer)
English - 11
FIRST-TIME SETUP
1
Back of Sound Bar
CHOOSE ONE CABLE
GOOD
BETTER
AND CONNECT IT TO
YOUR TV/DISPLAY
English - 12
OR
OR
BEST
3.5MM TO
RCA CABLE
GOOD
DIGITAL OPTICAL
CABLE
†
BETTER
DIGITAL COAXIAL
CABLE
†
BETTER
* Not all TVs/Displays have the audio outputs
shown above. To connect the Sound Bar directly
to your other devices (Blu-Ray player, game
system, etc.) see your device’s user manual.
† When using either of the Digital Inputs, if there
is no audio: (A) try setting the TV/Display output
to PCM or (B) Connect directly to your Blu-ray/
other source, some TV/Display do not pass
through digital audio.
HDMI ARC
CABLE
BEST
Do not use HDMI IN for First-Time Setup. See
Advanced Setup if you would like to connect HDMI
devices (such as Blu-ray™ players, cable boxes,
and game consoles) to your Sound Bar.
HDMI cables send Video (Out) and receive
Audio from the TV/Display. See the
Connecting with HDMI
section for more
information.
† When using the Digital Inputs, if there is no audio: (A) try setting the TV/Display
output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not
pass through digital audio.
Connect the Sound Bar to your TV/Display* using
one of the connection types to the left. Choose the
best possible connection type. Be sure the TV/Display
port is an audio output, not an audio input.
* Not all TVs/Displays have the audio outputs shown above. To connect the Sound Bar
directly to your other devices (Blu-ray player, game system, etc) see your device’s user
manual.
English - 13
English - 14
Connect the power cable to the sound bar AC
IN as shown.
2
Plug the power cable into an electrical outlet.
3
Lay the slim subwoofer on a clean, at surface. Insert the stands into the base of the
slim subwoofer.
Ensure the notch on each stand ts correctly into the
tabs on the base of the slim subwoofer.
Secure each stand to the slim subwoofer with two (2)
phillips screws (included).
Insert the screws into the base of the slim subwoofer
and tighten them using a Phillips screw driver (not
included).
Tip: Don’t install the subwoofer stands if the
subwoofer will be placed underneath a sofa.
English - 15
English - 16
4
Connect the satellite speakers to the slim subwoofer using the included satellite
speaker audio cables.
Match the color coded speaker cable to the
matching speaker port color.
5
Connect a power cable
to the slim subwoofer.
6
7
Plug the power cable
into a power outlet.
Flip the power switch
into the ON position.
English - 17
Loading...
+ 39 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.