Vizio E370A0, E320-A0 User Manual

Download

Page 1

VIZIO

user manual

Model: E320-A0 & E370-A0

Page 2

This product qualiﬁes for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits

necessary to qualify for ENERGY STAR rating.

SRS StudioSound HD and SRS TruVolume are trademarks of SRS Labs, Inc. StudioSound HD and TruVolume technologies are incorporated under

license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

HDMI, the HDMI logo and High-Deﬁnition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

LLC.

Page 3

Welcome

THANK YOU FOR CHOOSING VIZIO

And congratulations on your new VIZIO HDTV.

To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts.

PRODUCT REGISTRATION

To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at www.VIZIO.com or call toll free at (877) 878-4946.

We recommend that you either:

• Register your VIZIO product at www.VIZIO.com

• Complete and mail the enclosed registration card

Extended Warranties

For peace of mind, and to protect your investment beyond the standard warranty, VIZIO offers on-site extended warranty service plans. These plans provide additional coverage during the standard warranty period. To purchase an extended warranty service plan, visit www.VIZIO.com.

WHEN READING THIS MANUAL

When you see this symbol, please read the accompanying important warning or notice. It is intended to alert you to the presence of important operating instructions.

When you see this symbol, please read the accompanying helpful tip.

IMPORTANT SAFETY INSTRUCTIONS

Your TV is designed and manufactured to operate within deﬁned design limits. Misuse may result in electric shock or ﬁre. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.

• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your TV.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories speciﬁed by the manufacturer.

Page 4



• Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

• Unplug the power cord before cleaning your TV.

• When moving your TV from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your TV to avoid causing ﬁre, electric shock, or component damage.

• A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator, heater, oven, ampliﬁer etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture may cause ﬁre or electric shock.

• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your TV in a bookcase or cabinet unless proper ventilation is provided.

or local power company.

• Do not apply pressure or throw objects at your TV. This may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations.

• The power cord must be replaced when using different voltage than the voltage speciﬁed. For more information, contact your dealer.

• When connected to a power outlet, power is always ﬂowing into your TV. To totally disconnect power, unplug the power cord.

• The lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your TV that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons.

• Do not overload power strips and extension cords. Overloading can result in ﬁre or electric shock.

• The wall socket should be installed near your TV and easily accessible.

• Only power of the marked voltage can be used for your TV. Any other voltage than the speciﬁed voltage may cause ﬁre or electric shock.

• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.

• Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your TV from damage due to power surges.

• Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top of your TV. Doing so could short circuit parts causing a ﬁre or electric shock. Never spill liquids on your TV.

• Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer

• Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualiﬁed service personnel.

• WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into

Page 5

your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in ﬁre or electric shock.

• Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your TV yourself.

• Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your TV may cause ﬁre or electric shock.

• Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with heavy dust or high humidity may cause ﬁre or electric shock.

• Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before moving your TV.

• When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside the cord and cause ﬁre or electric shock. When your TV will not be used for an extended period of time, unplug the power cord.

• This apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus.

• The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

• CAUTION - These servicing instructions are for use by qualiﬁed service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualiﬁed to do so.

• The lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to the

presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of electrical shock to persons.

• To reduce risk of electric shock, do not touch the connector with wet hands.

• Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, ﬁre or the like.

• If any of the following occurs, contact the dealer:

- The power cord fails or frays.

- Liquid sprays or any object drops into your TV.

- Your TV is exposed to rain or other moisture.

- Your TV is dropped or damaged in any way.

- The performance of your TV changes substantially.

Page 6

TELEVISION ANTENNA CONNECTION PROTECTION

If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.

Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.

Ground Clamp

Lightning Protection

For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.

Power Lines

Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation.

Antenna Lead In Wire

Electric Service Equipment

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductors (NEC Section 810-21)

Ground Clamps

Power Service Grounding Electrode System

(NEC ART 250, part H)

Page 7

Table of Contents

Installing the TV ................................................ 3

Inspecting the Package Contents ..................................... 3

Installing the TV ................................................................... 3

Installing the TV Stand .....................................................3

Installing the TV on a Wall ................................................ 5

Controls and Connections .............................. 6

Front Panel ..........................................................................8

Remote Control ..................................................................9

Replacing the Batteries ...................................................10

Connecting Your Devices ................................. 11

Connecting A Device ......................................................... 11

Connecting a Device - Audio and Video Cable Types ......12

Connecting an Audio Device ............................................ 13

Connecting an Audio Device - Audio Cable Types ...........14

Connecting an Audio Device - ARC ................................... 15

Without HDMI ARC ............................................................ 15

With HDMI ARC ................................................................. 15

Completing the First-Time Setup ...................... 16

Using the On-Screen Menu .............................. 17

Navigating the On-Screen Menu .......................................17

Changing the Input Source ...............................................18

Changing the Screen Aspect Ratio ................................... 18

Setting Up Closed Captioning ...........................................19

Changing the Appearance of Digital Closed Captions . 19

Activating the Sleep Timer ..................................................20

Setting the Auto Power Off Feature ..................................20

Adjusting the Picture Settings ............................................21

Adjusting the Advanced Picture Settings ........................22

Adjusting the Color Temperature ....................................23

Adjusting the Picture Size and Position ...........................23

Resetting the Picture Settings .........................................24

Adjusting the Audio Settings .............................................. 25

Adjusting the Advanced Audio Settings ......................... 26

Resetting the Audio Settings ............................................ 26

Changing the TV Settings ................................................... 27

Changing the Input Source .............................................27

Setting the Tuner Mode ....................................................28

Scanning for Channels .................................................... 28

Adding New Channels ....................................................29

Skipping Channels...........................................................30

Changing the Audio Language ...................................... 30

Using the Parental Controls .............................................31

Accessing the Parental Controls Menu ........................... 31

Enabling or Disabling Program Ratings ........................... 32

Locking and Unlocking Channels ...................................32

Blocking and Unblocking Content by Rating ..................32

Changing the Parental Control Passcode ......................33

Resetting the Content Locks ............................................ 33

Changing the Names of the Inputs ................................33

Changing the On-Screen Menu Language ....................34

Setting the Time Zone ...................................................... 34

Adjusting the CEC Settings ..............................................35

Turning the Power Indicator Light On or Off ....................35

Using the Help Menu ..........................................................36

Displaying System Information ........................................36

Resetting the TV Settings .................................................. 37

Page 8

Restoring the TV to Factory Default Settings .................... 37

Performing a Service Check ............................................37

Using Guided Setup .........................................................38

Using the Info Window ........................................................39

Using the USB Media Player ............................. 40

Using the USB Media Player ................................................ 40

Connecting a USB Thumb Drive to the TV ........................ 40

Playing USB Media ...........................................................40

Troubleshooting & Technical Support .............. 42

Speciﬁcations ................................................... 45

Limited Warranty ............................................... 47

Legal & Compliance ........................................ 48

Page 9

Installing the TV

INSPECTING THE PACKAGE CONTENTS

Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged.

VIZIO LED HDTV with Stand

INSTALLING THE TV

After removing the TV from the box and inspecting the package contents you can begin installing the TV. Your TV can be installed in two ways:

• On a ﬂat surface, using the included stand

• On a wall, using a VESA-standard wall mount (not included)

Installing the TV Stand

Your TV includes a stand designed to support the weight of the TV and keep it from falling over. However, the TV can still fall over if:

• It is placed on an uneven, unstable, or non-level surface

• It is pushed, pulled, or otherwise improperly moved

• If an earthquake occurs and the TV is not properly secured

Remote Control

with Batteries

Power Cord

Quick Start Guide

1 x Hex Screw

VIZIO

Quick Start Guide

Hex Wrench

PACKAGE CONTENTS

TV ON STAND

Page 10

To install the base:

1. Place the TV screen-down on a certain, ﬂat surface. To prevent scratches or damage to the screen, place the TV on a soft surface, such as a blanket.

2. Align the base with the TV and tighten the hex screw into the base with the included hex wrench.

3. Move the TV with attached stand into an upright position and place on a ﬂat, level, and stable surface.

4. To ensure proper ventilation, leave at least 1” of space between the back of the TV and any other objects (walls, etc).

Installing the TV on a Wall

To mount your TV on a wall, you will need a wall mount. Consult the information below to ﬁnd the appropriate mount for your TV model:

Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you.

E320-A0 E370-A0

Screw Size: M4 M4

Screw Pitch: 0.70mm 0.70mm

Screw Length: 10mm 20mm

Hole Pattern: 100mm (V) x 100mm (H) 100mm (V) x 100mm (H)

Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation.

To install your TV on a wall:

1. Disconnect any cables connected to your TV.

2. Place the TV face-down on a clean, ﬂat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV.

3. Remove the base by loosening and removing the screws.

4. Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount.

Use only with a UL-listed wall mount bracket rated for the weight/load of this TV. See weight of this TV.

Appendix B - Speciﬁcations

for the

Page 11

Controls and Connections

USB - Connect USB thumb drive to play photo.

HDMI - Connect HDMI device.

Analog Audio Out - Connect RCA audio device, such as sound

bar.

Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.

Optical Audio Out - Connect optical/SPDIF audio device, such as home audio receiver.

Coaxial - Connect coaxial cable from cable, satellite, or antenna.

Component/Composite - Connect component or composite

device.

HDMI - Connect HDMI device.

REAR PANEL

Page 12

POWER - Turn TV off or on.

INPUT - Change input source.

MENU - Open the on-screen menu.

CHANNEL UP/DOWN - Change the channel.

VOLUME UP/DOWN - Increase or decrease volume level.

SIDE PANEL

Page 13

Front Panel

REMOTE SENSOR & POWER INDICATOR When using the remote, aim it directly at this sensor.

FRONT PANEL

Page 14

remote Control

INPUT

Change the currently-displayed input.

A/V CONTROLS

Control USB photo viewer.

CLOSED CAPTIONS

Open the closed caption menu.

EXIT

Close the on-screen menu.

Select the highlighted menu option.

BACK

Go to the previous on-screen menu.

VOLUME UP/DOWN

Increase or decrease loudness of the audio.

MUTE

Turn the audio off or on.

NUMBER PAD

Manually enter a channel.

WIDE

Switch the display mode.

POWER

Turn TV on or off.

INFO Display the info window.

Display the on-screen menu.

ARROW Navigate the on-screen menu.

GUIDE

Display the info window.

V BUTTON Open the USB photo viewer.

CHANNEL UP/DOWN

Change the channel.

LAST Return to the channel last viewed.

DASH

Use with number pad to manually enter a digital sub-channel. (For example, 18-4 or 18-5.)

REMOTE CONTROL

Page 15

Replacing the Batteries

1. Remove the battery cover.

2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment.

3. Replace the battery cover.

Page 16

Connecting Your Devices

ConneCting A DeviCe

Your TV can be used to display output from most devices.

1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc).

2. Turn the TV and your device off.

3. Connect the appropriate cable (not included) to the TV and the device.

Cable/Satellite Box

4. Turn the TV and your device on. Set the TV’s input to match the connection you used (HDMI, Component, etc).

DVD/Blu-ray Player

HDMI CABLE

BEST

COMPONENT CABLE

BETTER

AV CABLE

GOOD

Game Console

• DIGITAL

• HD VIDEO (1080p)*

• HD AUDIO

• ANALOG

• HD VIDEO (1080p)*

• STEREO AUDIO

• ANALOG

• VIDEO (480i)*

• STEREO AUDIO

Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.

* Maximum Resolution

Page 17

COMPONENT VIDEO

CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES

Av CABLe

AV cables (or Composite cables) are the traditional way of connecting your devices to your TV. Video signals are sent over the yellow connector while audio is sent over the red and white connectors.

• Video Resolutions up to 480i

• Analog Connection

• Audio and Video Signals

Y L R

CoMPonent CABLe

Component cables are designed to carry high deﬁnition video signals along with additional audio connections. Colors are delivered with color information split up three different ways over three connectors for video (separated into Red, Blue and Green signals) and the left and right audio connectors (Red and White).

• HD Video Resolutions up to 1080p

• Analog Connection

• Audio and Video Signals

R L Pr/Cr Pb/Cb Y HDMI

HDMi CABLe

HDMI is the intelligent, all-digital interface that delivers both dazzling quality and unmatched ease of use. HDMI technology transmits crystal-clear digital video along with multi-channel surround audio. HDMI-connected devices have the ability to automatically adjust themselves for optimal viewing.

• HD Video Resolutions up to 1080

• HD Audio

• Digital Connection

• Audio and Video Signals

GOOD BETTER

BEST

Page 18

ConneCting An AuDio DeviCe

Your TV can output sound to an audio device, such as a receiver or sound bar.

1. Verify that your device has a video port that matches an available port on the TV (HDMI, RCA, etc).

2. Turn the TV and your audio device off.

3. Connect the appropriate cable (not included) to the TV and the device.

Home Audio Receiver

4. Turn the TV and your device on.

VIZIO Sound Bar

HDMI CABLE

BEST

OPTICAL/SPDIF CABLE

BETTER

RCA CABLE

GOOD

• CFC 2-WAY COMMUNICATION

• 2.0-5.1 DIGITAL AUDIO

• PCM, DTS, DOLY DIGITAL

• PCM STREAM

• DOLBY DIGITAL 5.1 CHANNEL

• DTS 5.1 CHANNEL

• ANALOG STEREO CONNECTION

• 2.0 CHANNEL

Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.

Page 19

CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES

COMPONENT VIDEO

RCA CABLe

AV (Composite cables) are the traditional way of connecting your devices to your audio device. Audio signals are sent over the red and white connectors.

• Quality Stereo Connection

• 2.0 Channel

• Analog Connection

• Audio Signal Only

L R

oPtiCAL/SPDiF CABLe

Optical/SPDIF cables transmit audio signals as pulses of light through a cable made of plastic ﬁbers. Audio signals are digitally transmitted between devices.

• PCM Stream (Lossless)

• Dolby Digital 5.1 Channel

• DTS 5.1 Channel

• Digital Connection

• Audio Signal Only

Optical/SPDIF

HDMi CABLe

HDMI technology transmits crystal-clear digital multi-channel surround audio through a single HDMI cable. Audio Return Channelenabled (ARC) TVs allow audio to be sent over an already connected HDMI cable, eliminating the need for a separate audio cable. See

Connecting an Audio Device - ARC

14.

• CFC 2-way Communication (Auto setup)

• PCM, DTS, Dolby Digital

• 2.0-5.1 Scaleable Lossless Digital Audio Connection

• Audio and Video Signals

HDMI

on page

GOOD

BETTER

BEST

Page 20

CONNECTING AN AUDIO DEVICE - ARC

Without HDMI ARC With HDMI ARC

Without an HDMI ARC setup, your TV will transmit audio signal from the built-in tuner and VIA apps to your home audio receiver through a seperate audio connection.

RCA (Audio)

Your Home Audio Receiver

Built-in Tuner

Your TV

HDMI

Built-in Tuner

Your TV

HDMI

Your Home Audio Receiver

With an HDMI ARC setup, the audio connection between your TV and Home Audio Receiver can be removed. The HDMI cable will transmit audio signal to and from your TV with an all-digital audio/video connection.

HDMI

Your Blu-Ray Player

HDMI

Your Blu-Ray Player

Page 21

Completing the First-Time Setup

The ﬁrst time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use.

Before you begin the ﬁrst-time setup:

• Your TV should be installed and the power cord should be connected to an electrical outlet.

• Your devices should be connected.

To complete the ﬁrst-time setup:

1. Press the Power/Standby

button on the remote. The TV powers on and the Setup App starts.

2. Use the Up/Down Arrow

buttons on the remote to highlight your preferred language and press OK.

3. Use the OK and Arrow Up/ Down buttons on the remote to highlight Home mode Setup and press OK.

4. Use the OK and Arrow Up/ Down buttons on the remote to highlight your time zone and press OK.

5. Use the OK and Arrow Up/ Down Buttons on the remote to turn daylight saving time On or Off.

6. Answer the on-screen questions about your TV connection using the Arrow and OK buttons on the remote.

7. Use the Arrow buttons to highlight Start the Channel Scan and press OK.

8. When you have ﬁnished the channel scan, highlight Exit to

Live TV and press OK.

The First-Time Setup is complete.

Page 22

Using the On-Screen Menu

Network

Normal

PanoramicWide Zoom

2D 3DExit

Your TV features an easy-to-use on-screen menu.

To open the on-screen menu, press the MENU button on the remote. You can also open the on-screen menu by pressing the VIA button and selecting HDTV Settings from the VIA Dock, then pressing OK.

From this menu, you can:

• Change the input source

VIZIO

• Change the screen aspect ratio

ABC

• Set up closed captioning

• Activate the sleep timer

Input CC

Wide

• Adjust the picture settings

• Adjust the audio settings

• Access USB photo slideshow

Sleep

Timer

Picture

Audio

• Change TV settings

• Access the help menu

Media

Settings

Help

NavigatiNg the ON-ScreeN MeNu

To open the on-screen menu,

press the MENU/OK button on the remote.

Use the Arrow buttons to highlight a menu option, and press the MENU/OK button to select that option.

While navigating the on-screen menu, you can press the BACK button at any time to return to the previous menu screen. The EXIT button will close the on-screen menu.

Page 23

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

chaNgiNg the iNput SOurce

External devices such as DVD players, Blu-Ray Players, and video game consoles can be connected to your TV. To use one of these devices with your TV, you must ﬁrst change the input source in the on-screen menu.

To change the input device:

1. Press the MENU button on the

remote. The on-screen menu is displayed.

2. Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The TV Settings menu is displayed.

3. Use the Up/Down Arrow buttons on the remote to highlight the input source and press OK. The Input Source Selection menu is displayed.

4. Use the Up/Down Arrow buttons on the remote to highlight the input source you wish to display and press OK.

VIZIO

Input Source Selection

Comp/AV

HDMI-1

HDMI-2

chaNgiNg the ScreeN aSpect ratiO

The TV can display images in four different modes: Wide, Zoom, Normal, and Stretch. Each mode displays the picture differently.

To change the screen aspect ratio:

1. Press the MENU button on the

remote.

2. Use the Arrow buttons to

Wide Zoom Normal Panoramic

highlight the Wide icon. Press OK.

3. Use the Arrow buttons to highlight your desired screen mode and press OK:

• Normal preserves the content’s original aspect ratio.

Since the 4:3 aspect ratio is not large enough to ﬁll the TV’s screen, black bars are added to the left and right of the display image.

• Wide stretches a 4:3 aspect ratio picture to the edges

of the screen. Since the picture is being stretched, the display image may appear distorted. If the program is already formatted for widescreen viewing (1.85:1 or

2.35:1), then black bars will appear on the top and bottom of the display image.

• Zoom expands images with black bars to ﬁt the screen.

• Panoramic expands the display image to ﬁll the screen.

Images may appear wider than intended. If you are watching widescreen (1.85:1 or 2.35:1) content, black bars will still appear on the top and bottom of the display image. This option is only available when the TV is

displaying a 480i/480p source.

Screen Mode

• Stretch expands the display image to ﬁll the screen.

displaying a 720p/1080i/1080p source.

Page 24

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

SettiNg up clOSed captiONiNg

Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue.

If the program you are viewing is not being broadcast with closed captions, the TV will not display them.

To activate or deactivate closed captions:

1. Press the MENU button on the

remote. The on-screen menu is displayed.

2. Use the Arrow buttons on the remote to highlight the CC icon and press OK. The Closed Caption menu is displayed.

3. Use the Arrow buttons on the remote to highlight the type of closed captions you wish to see:

• Analog Closed Caption for

analog (NTSC) TV channels.

• Digital Closed Caption for

digital (ATSC) TV channels.

4. After highlighting the type of closed captions you wish to see, use the Left/Right Arrow buttons on the remote to select the caption channel you wish

to display, then press EXIT.

Caption channels usually display different languages. For example, CC1 may display English captions and CC2 may display Spanish captions.

VIZIO

Closed Caption

Analog Closed Caption Off

Digital Closed Caption Off

Digital CC Style As Broadcast

Changing the Appearance of Digital Closed Captions

Digital closed captions can be displayed according to your preference.

To change the appearance of digital closed captions:

1. From the Closed Caption

menu, use the Arrow buttons to

VIZIO

highlight Digital CC Style.

Digital CC Style

2. Use the Left/Right Arrow

buttons on the remote to select Custom, then press OK. The Digital CC Style menu appears.

3. Use the Up/Down Arrow

buttons on the remote to highlight the setting you wish to change, then use the Left/

Caption Style Custom

Text Size As Broadcast

Color As Broadcast

Opacity As Broadcast

BG Color As Broadcast

BG Opacity As Broadcast

Window Color As Broadcast

Window Opacity As Broadcast

Right Arrow buttons to change the setting:

• Caption Style - Choose

Auto to keep default settings or Custom to manually change each setting.

• Text Size - Adjust the size of

the text.

• Color - Change the color of the text.

• Opacity - Change the transparency of the text.

• BG Color - Change the background color.

• BG Opacity - Change the transparency of the

background.

• Window Color - Change the edge color.

• Window Opacity - Change the edge type.

4. When you are satisﬁed with the appearance of the closed

captions, press the EXIT button on the remote.

Page 25

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

activatiNg the Sleep tiMer

When activated, the TV’s sleep timer will turn the TV off after a set period of time.

To use the sleep timer:

1. Press the MENU button on the remote. The on-screen menu is displayed.

2. Use the Arrow buttons on the remote to highlight the Sleep Timer icon and press OK. The Sleep Timer menu is displayed.

3. Use the Up/Down Arrow buttons on the remote to highlight Timer and press OK. The Timers menu is displayed.

4. Use the Up/Down Arrow buttons on the remote to highlight the period of time after which you want the TV to turn off: 30, 60, 90, 120, or 180

minutes.

VIZIO

Sleep Timer

Timer Off

Auto Power Off Off

Setting the Auto Power Off Feature

To help save energy, your TV is set by default to turn off after 10 minutes if no signal is being displayed on the screen. This feature can be deactivated.

To set the Auto Power Off feature:

1. From the Sleep Timer menu, use the Up/Down Arrow buttons on the remote to highlight Auto Power Off and press OK. T he Auto Power-Off menu is displayed.

2. Highlight Off or 10 min and press OK. Press Exit.

5. Press OK, then press EXIT.

Page 26

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

adjuStiNg the picture SettiNgS

Your TV display can be adjusted to suit your preferences and viewing conditions.

To adjust the picture settings:

1. Press the MENU button on the

remote. The on-screen menu is displayed.

2. Use the Arrow buttons on the remote to highlight the Picture icon and press OK. The Picture Settings menu is displayed.

3. Use the Up/Down Arrow buttons on the remote to highlight Picture and press OK. The Picture Settings menu is displayed.

4. Use the Arrow buttons on the remote to highlight Picture

Mode, then use the Left/Right Arrow buttons to change the

picture mode:

• Standard mode sets the

various picture settings to values that will produce the best picture in the most cases. This is the recommended setting.

• Movie mode sets the picture settings to values perfect for

watching a movie in a dark room.

VIZIO

Picture Settings

Picture Mode Custom

Backlight 50

Brightness 50

Contrast 50

Color 50

Tint 0

Sharpness 0

• Football, Golf, Basketball, and Baseball modes optimize

the picture settings for their respective sports. Also try these modes for other sports.

• Custom picture mode allows you to manually change

each of the picture settings:

Backlight - Adjusts the LED brightness to affect the overall brilliance of the picture. This option is not available unless Ambient Light Sensor is set to OFF. See

Adjusting the Advanced Picture Settings

on page

21.

Brightness - Adjusts the black level of the picture. When this setting is too low, the picture may be too dark to distinguish details. When this setting is too high, the picture may appear faded or washed out.

Contrast - Adjusts the white level of the picture. When this setting is too high, the picture may appear dark. When this setting is too low, the picture may appear faded or washed out. If the setting is too high or too low, detail may be difﬁcult to distinguish in dark or bright areas of the picture.

Color - Adjusts the intensity of the picture colors.

Tint - Adjusts the hue of the picture. This setting is

useful in adjusting the ﬂesh tones in the picture. If ﬂesh appears too orange, reduce the level of color before adjusting tint.

Sharpness - Adjusts the edge sharpness of picture elements. It can be used to sharpen non-HD (high deﬁnition) content; however, it will not produce detail that does not otherwise exist.

• Game mode optimizes the picture settings for displaying

game console output.

• Vivid mode sets the picture settings to values that

produce a brighter, more vivid picture.

Page 27

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Adjusting the Advanced Picture Settings

To adjust the advanced picture settings:

1. From the Picture Settings menu, use the Arrow buttons on the remote to highlight More, then press OK.

Noise Reduction Low

2. Use the Arrow buttons on the remote to highlight Advanced Picture, then press OK. The Advanced Picture menu is displayed.

3. Use the Arrow buttons to

MPEG NR Low

Color Enhancement Normal

Adaptive Luma Medium

Film Mode Auto

Backlight Control DCR

Ambient Light Sensor Medium

highlight the setting you wish to adjust, then press Left/Right Arrow to change the setting:

• Noise Reduction -

Diminishes artifacts in the image caused by the digitizing of image motion content. Select Off, Low, Medium, or High.

VIZIO

Advanced Picture

• Ambient Light Sensor - The ambient light sensor detects

the light levels in the room and automatically adjusts the backlight for the best picture. Select Off, Low, Medium, or High.

4. When you have ﬁnished adjusting the Advanced Picture

Settings, press the EXIT button on the remote.

• MPEG NR - Reduces

pixellation and distortion for .mpeg ﬁles. Select Off, Low, Middle, or High.

• Color Enhancement - Reduces oversaturation of some

colors and improves ﬂesh tones. Select Off, Normal, Rich Color, Green/Flesh, or Green/Blue.

• Adaptive Luma - Adjusts the average brightness of the

picture to compensate for large areas of brightness. Select Off, Low, Medium, Strong, or Extend.

• Film Mode - Optimizes the picture for watching ﬁlm.

Select Auto or Off.

• Backlight Control - Select Off, DCR (Dynamic Contrast

Ratio), or OPC.

Page 28

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Adjusting the Color Temperature

Adjusting the color temperature will change the “warmness” or “coolness” of the white areas of the picture.

To adjust the color temperature:

1. From the Picture Settings Menu, use the Arrow buttons to

VIZIO

highlight More, then press OK.

2. Use the Arrow buttons on the remote to highlight Color Temperature, then press OK. The Color Temperature menu is displayed.

3. Use the Arrow buttons on the remote to highlight Color

Temperature, then use the Left/Right Arrow buttons to

change the color temperature

Color Temperature

Color Temperature Normal

Red Gain 128

Green Gain 128

Blue Gain 128

Red Offset 128

Green Offset 128

Blue Offset 128

Reset Color Temperature

preset:

• Cool produces a blue-hued

picture.

• Computer optimizes the

picture for use as a PC monitor.

• Normal is optimized for

television viewing.

• Custom allows you to

manually change each of the color temperature settings:

Red/Green/Blue Gain - Adjusts the amount of each color in the display.

Red/Green/Blue Offset - Adjusts the position of each color in the display.

4. If you want to reset the color temperatures to the factory default settings, highlight Reset Color Temperature and press OK.

Adjusting the Picture Size and Position

When displaying an image from the HDMI input, the size and position of the display image can be adjusted.

To adjust the picture size and position:

1. Ensure the input is set to ATV/ HDMI.

VIZIO

2. From the Picture Settings menu, use the Arrow buttons on the remote to highlight More, then press OK.

3. Use the Arrow buttons on the remote to highlight Size & Position, then press OK. The Size & Position menu is displayed.

4. Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right

Arrow to change the setting:

• Horiz. Position - Adjusts

the horizontal (left/right) position of the display image.

• Vertical Position - Adjusts

the vertical (up/down) position of the display image.

• Horizontal Size - Adjusts the width of the display image.

• Vertical Size - Adjusts the toheight of the display image.

5. When you have ﬁnished adjusting the color temperature, press the EXIT button on the remote.

Size & Position

Horiz. Position 32

Vertical Position 16

Horizontal Size 0

Vertical Size 0

5. When you have ﬁnished adjusting the color temperature,

press the EXIT button on the remote.

Page 29

Resetting the Picture Settings

To reset the picture settings to the factory default settings:

1. From the Picture Settings menu, use the Arrow buttons to highlight More, then press OK.

2. Use the Arrow buttons on the remote to highlight Reset Picture Mode, then press OK. The TV displays, “Are you sure you want to RESET Picture Settings to the factory defaults?”

3. Highlight Yes and press OK.

4. Press the EXIT button on the remote.

Page 30

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

adjuStiNg the audiO SettiNgS

To adjust the audio settings:

1. Press the MENU button on the remote. The on-screen menu is displayed.

2. Use the Arrow buttons on the remote to highlight Audio and press OK. The Audio Settings menu is displayed.

3. Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/Right

Arrow to change the setting:

• Balance - Adjusts the

loudness of the audio output from the left and right speakers.

• Lip Sync - Adjusts the syn-

chronization between the display image and the accompanying audio track.

VIZIO

Audio Mode Flat

Balance 0

Lip Sync 0

TV Speakers Off

SRS StudioSound HD Surround

SRS TruVolume On

Advanced Audio

Equalizer Settings

Reset Audio Mode

Audio

• Advanced Audio - See

Settings

on page 25.

Adjusting the Advanced Audio

• Equalizer Settings - Adjusts the boost or attenuation of

different frequencies. (This setting is only available when SRS StudioSound HD is set to Standard.) Change the equalizer presets by selecting Jazz, Classical, Pop, Rock, or Flat. To change the equalizer settings yourself, highlight EQ Mode and press OK.

• Reset Audio Mode - Restores the audio settings to the

factory defaults. See

page 25

Resetting the Audio Settings on

4. When you have ﬁnished adjusting the audio settings, press

the EXIT button on the remote.

• TV Speakers - Turns the

built-in speakers on or off.

• SRS StudioSound HD - StudioSound HD™ is a feature-rich

surround sound solution which delivers an immersive surround sound experience from the TV’s internal speakers. Additionally, StudioSound HD completes the entertainment experience by maintaining a steady volume while watching programming and movies, providing deep, rich bass, and delivering crisp details and clear, intelligible dialog. Select Surround or Standard.

• SRS TruVolume - TruVolume

intelligently normalizes volume ﬂuctuations due to television commercials or channel changes. Select On or Off.

Page 31

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Adjusting the Advanced Audio Settings

To adjust the advanced audio settings:

1. From the Audio Settings Menu,

use the Arrow buttons to highlight Advanced Audio, then press OK. The Advanced Audio menu is displayed.

2. Use the Arrow buttons to

highlight the setting you wish to adjust, then press Left/Right

Arrow to change the setting:

• Digital Audio Out -

Changes the type of processing for the Optical output when connected to a home theater audio system. Select Off, Dolby Digital, or PCM.

• Analog Audio Out - Sets the

volume control properties for the analog RCA (red/ white) connectors when connected to a home theater audio system. Select Variable to control the external speakers’ volume from the TV’s volume controls, or select Fixed to control the external speakers’ volume from your home theater system controls.

VIZIO

Advanced Audio

Digital Audio Out PCM

Analog Audio Out Fixed

Resetting the Audio Settings

To reset the audio settings to the factory default settings:

1. Press the MENU button on the remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on the remote to highlight the Audio icon and press OK. The Audio Settings menu is displayed.

3. Use the Arrow buttons to highlight Reset Audio Mode and press OK. The TV displays, “Are you sure you want to RESET Audio Settings to the factory defaults?”

4. Highlight Yes and press OK.

5. Press the EXIT button on the remote.

3. When you have ﬁnished adjusting the advanced audio

settings, press the EXIT button on the remote.

Page 32

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

chaNgiNg the tv SettiNgS

Using the settings menu, you can:

• Change the input source

• Adjust the Tuner settings

• Name the TV inputs

• Set up parental controls

• Change the on-screen menu language

• Set the time

• Adjust the CEC settings

• Adjust the Power Indicator settings

VIZIO

Settings

Input Source TV

Tuner

Name Input

Parental Controls

Menu Language English

Time & Local Settings

CEC Settings

Power Indicator On

Changing the Input Source

To change the input source from the Settings menu:

1. Press the MENU button on the remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The Settings menu is displayed.

3. Highlight Input Source and press OK. The Input Source menu is displayed.

4. Highlight the input source you want to display and press OK.

Page 33

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Setting the Tuner Mode

If you are using a device that is connected to the RF input, such as an external antenna or cable TV connection, you must set the tuner mode.

1. Press the MENU button on the remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The Settings menu is displayed.

3. Highlight Tuner and press OK. The Tuner Mode menu is displayed.

4. Highlight Antenna or Cable and press OK.

5. Press the EXIT button on the remote.

Scanning for Channels

Before the TV can detect and display channels and their associated information, you must scan for channels. A channel scan may also be necessary when the TV has been moved to an area where different free-to-air broadcast television channels are available.

1. From the Tuner Settings menu,

highlight Auto Channel Scan.

VIZIO

The auto channel scan begins.

Channel Scan

2. Wait until the channel scan is

100% complete. Highlight Done and press OK.

3. Press the EXIT button on the

remote.

Channels found

Digital: 0

Analog: 19

18% Complete

Cancel

Page 34

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Adding New Channels

Occasionally, you may need to add a new analog channel or add a new range of channels. You can do this by using the Partial Channel Search and Add Analog Channel options.

To add a range of new channels:

1. From the Tuner menu, highlight Partial Channel Search. Th e Partial Channel Search menu is displayed.

2. Highlight Scan Mode and select the type of channel you are adding: Analog/Digital, Analog, or Digital.

3. Highlight From Channel and enter the channel from which you want to begin the scan. (Use the Number Pad on the remote to enter the channel.)

4. Highlight To Channel and enter the channel to which you want to end the scan. (Use the Number Pad on the remote to enter the channel.)

5. Highlight Start and press OK. The partial channel search begins.

To add a single new analog channel:

To quickly access the Input Source menu, press the INPUT button on the remote.

1. From the Tuner Settings menu,

highlight Add Analog Channel and press OK. The Add Analog Channel menu is displayed.

2. Highlight Enter Channel # and use the Number Pad on the remote to enter the number of the channel you are adding.

3. Highlight Add Channel and press OK. The TV scans for the channel.

4. When the TV is done scanning for the channel, press the EXIT button on the remote.

VIZIO

Add Analog Channel

Enter Channel # __

Add Channel

6. Wait until the partial channel search is 100% complete.

Highlight Done and press OK.

7. Press the EXIT button on the remote.

Page 35

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Skipping Channels

After a channel scan is completed, you may ﬁnd that some channels are too weak to watch comfortably. There may also be some channels you do not want to view. You can remove these channels from the TV’s memory with the Skip Channel feature.

Channels that have been removed with the Skip Channel feature can still be viewed if the channel is entered using the Number Pad. If you wish to completely block a channel from being viewed, use the parental controls. See

on page 30

To remove a channel:

1. From the Tuner Settings menu,

highlight Skip Channel.

VIZIO

The Skip Channel menu is displayed.

2. For each channel you wish

to remove, use the Up/Down Arrow buttons on the remote to highlight the channel and press OK. An X appears to the

0-1

0-2

0-3

Skip Channel

Test 0 x

Test 1 x

Test 2 x

Test 3 x

Test 4 x

Test 5 x

right of each channel you select.

3. When you have selected all of the channels you wish to remove, press the EXIT button on the remote.

Changing the Audio Language

Some digital free-to-air and cable channels broadcast programs in more than one language. The TV’s MTS (Multichannel Television Sound) feature allows you to listen to audio in your preferred language.

Not all programs are broadcast in multiple languages. The MTS feature only works when the program being viewed is being broadcast in the language you select.

To use the Analog MTS feature:

1. From the Tuner Settings menu,

highlight Analog MTS and

VIZIO

press OK. The Analog MTS menu is displayed.

2. Select Mono, Stereo, or SAP (secondary audio

Analog MTS

Mono

Stereo

SAP

programming). Press OK.

3. Press the EXIT button on the remote.

Page 36

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

To use the Digital MTS feature:

1. From the Tuner Settings menu,

highlight Digital MTS and press OK. The Digital MTS menu is displayed.

2. Select your preferred language:

English, French, or Spanish. Press OK.

3. Press the EXIT button on the

remote.

VIZIO

Digital MTS

English

French

Spanish

Using the Parental Controls

The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password.

Accessing the Parental Controls Menu

To access the Parental Controls menu:

1. Press the MENU button on the remote. The on-screen menu is displayed.

2. Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The TV Settings menu is displayed.

3. Use the Arrow buttons on the remote to highlight Parental Controls and press OK.

4. Enter your parental passcode. If you have not set a passcode, enter the default, 0000. The Parental Controls menu is displayed.

To set a custom parental passcode, see

the Parental Control Passcode

on page 32.

Changing

Page 37

Enabling or Disabling Program Ratings

To manage program content according to its rating, you must enable the Program Rating feature.

To enable or disable the Program Rating feature:

1. From the Parental Controls menu, highlight Rating Enable and press OK. The Rating Enable menu is displayed.

2. Select On or Off and press OK.

Locking and Unlocking Channels

When a channel is locked, it will be inaccessible. Locking a channel is a good way to prevent children from viewing inappropriate material.

To lock or unlock a channel:

1. From the Parental Controls menu, highlight Channel Locks and press OK. The Channel Locks menu is displayed.

2. Highlight the channel you want to lock or unlock and press OK.

3. When a channel is locked, the Lock icon appears locked. The channel is not accessible unless the parental passcode is entered.

4. When a channel is unlocked, the Lock icon appears

unlocked. The channel is accessible.

Blocking and Unblocking Content by Rating

A channel may sometimes broadcast programs that are meant for children, and at other times broadcast programs that are meant for mature audiences. You may not want to block the channel completely using a channel lock, but you may wish to block certain programs from being viewed.

When this is the case, you can use the TV’s Rating Block feature to block content based on its rating.

To block or unblock content by its rating:

1. From the Parental Controls menu, highlight the content type

you want to adjust and press OK:

USA - TV - USA television program broadcasts.

USA - Movie - USA movie broadcasts.

CAN - English - Canadian English television program

broadcasts.

CAN - French - Canadian French television program broadcasts.

2. For each rating type you want to block or unblock, use the

Up/Down and Left/Right Arrow buttons on the remote to highlight the rating type and press OK.

3. When the rating type is blocked, the Lock icon appears locked. Content with this rating cannot be viewed.

For a list of content ratings and their deﬁnitions, visit www.tvguidelines.org.

4. When the rating type is unblocked, the Lock icon appears unlocked. Content with this rating can be viewed.

If you want to block all unrated content, highlight Block Unrated Shows and use the Arrow buttons on the remote to select On.

5. When you are ﬁnished adjusting the rating level blocks, press the EXIT button on the remote.

Page 38

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Changing the Parental Control Passcode

If you use the parental controls, you should change the passcode to prevent children from accessing inappropriate material.

1. From the Parental Controls menu, highlight Change PIN and press OK. The Change PIN menu is displayed.

2. In the New Pin ﬁeld, use the Number Pad on the remote to enter your new 4-digit parental control passcode.

3. In the Conﬁrm Pin ﬁeld, use the Number Pad on the remote to re-enter your new 4-digit parental control passcode.

4. Write down your new parental control passcode and save it in a secure location.

5. Press the EXIT button on the remote.

Resetting the Content Locks

To reset the content locks to the factory-default settings:

1. From the Parental Controls menu, highlight RESET LOCKS and press OK. The TV displays, “Are you sure you want to RESET ALL LOCKS SETTINGS to the factory defaults?”

2. Highlight Yes and press OK.

Changing the Names of the Inputs

To make it easier to recognize the different devices attached to the inputs on your TV, you can rename the inputs. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player”.

To change the name of an input:

1. Press the MENU button on the

remote. The on-screen menu is

VIZIO

displayed.

2. Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The Settings menu is displayed.

Name Input

Input Source TV

Input Labels Custom

3. Use the Arrow buttons on the remote to highlight Name Input and press OK. The Name Input menu is displayed.

4. Highlight Input Source and press OK. Highlight the input you want to rename and press OK.

5. If you would like to use a preset input label, highlight Input Labels and press OK. Highlight the input label you want to use and press OK.

If you would like to name the input yourself, highlight the ﬁeld below Input Labels and enter your custom label using the on-screen keyboard and press OK.

6. When you have ﬁnished naming your input, press the EXIT button on the remote.

Page 39

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

Changing the On-Screen Menu Language

Your TV can display the on-screen menu in different languages.

To change the on-screen menu language:

1. Press the MENU button on the

remote. The on-screen menu is

VIZIO

displayed.

Manu Language

2. Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The Settings

English

French

Spanish

menu is displayed.

3. Use the Arrow buttons on the remote to highlight Menu Language and press OK. The Menu Language menu is displayed.

4. Highlight your preferred language (English, French, or Spanish) and press OK.

5. Press the EXIT button on the remote.

Setting the Time Zone

To ensure the correct time is displayed when you press the INFO button, set the TV’s time zone:

To have the TV display the correct time, you must be connected to the internet via an Ethernet cable or a wireless network.

1. Press the MENU button on the

remote. The on-screen menu is

VIZIO

displayed.

2. Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The Settings menu is displayed.

3. Use the Arrow buttons on the remote to highlight Time & Local Settings and press OK. The Time & Local Settings menu is displayed.

4. Highlight Time Zone and press

Time Zone

Alaska (US)

Hawaii (US)

Paciﬁc (US, CAN)

Mountain (US, CAN)

Central (US, CAN)

Eastern (US, CAN)

Atlantic (CAN)

Newfoundland (CAN)

Indiana (US)

Arizona (US)

OK. The Time Zone menu is displayed.

5. Highlight your time zone and press OK.

6. Highlight Daylight Savings and press OK. The Daylight Savings menu is displayed. Choose On if daylight savings is in effect, or Off if it is not.

7. Highlight Postal Code. Enter your ZIP code using the keypad on the remote, then press OK. The ZIP code information is often used by VIA Apps to give you the most accurate location-based information, such as weather or news.

8. Press the EXIT button on the remote.

Page 40

Adjusting the CEC Settings

The CEC function on your TV enables you to control HDMI-connected devices with the included remote without any additional programming.

Not all HDMI devices support CEC. See your device’s user manual for details.

To enable, disable, or adjust CEC settings:

1. Press the MENU button on the remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The Settings menu is displayed.

3. Use the Arrow buttons on the remote to highlight CEC Settings and press OK. The CEC Settings menu is displayed.

4. Use the Arrow and OK buttons to adjust each setting:

• CEC Function - To use CEC, you must select Enable.

• System Audio Control - When system audio control is on,

you can control your device’s audio using the TV’s remote control.

Turning the Power Indicator Light On or Off

The Power Indicator Light on the front of your TV is set to light up when the TV is on. You can change this setting if you prefer the light to be off.

To turn the Power Indicator Light on or off:

1. Press the MENU button on the remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The Settings menu is displayed.

3. Highlight Power Indicator and press OK.

4. Use the Up/Down Arrow buttons to select On or Off, then press OK.

• Device Discovery - Use this function to determine if your

device is connected and supports CEC.

5. Press the EXIT button on the remote.

Page 41

Help

Network

Sleep

Timer

Input CC

ABC

Audio

Wide

Normal

Picture

Settings

PanoramicWide Zoom

2D 3DExit

uSiNg the help MeNu

You can use the TV’s Help menu to:

• Display system information

• Reset the TV settings

• Restore the TV to its factory default settings

• Start Setup Wizard

VIZIO

Help

System Info

Reset TV Settings

Clear Memory (Factory Default)

Start Setup Wizard

Displaying System Information

To display a summary of the TV settings:

1. Press the MENU button on the remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on the remote to highlight the Help icon and press OK. The Help menu is displayed.

3. Highlight System Info and press OK.

4. Use the Up/Down Arrow buttons to scroll through the system information.

5. When you are ﬁnished reviewing the system information, press the EXIT button on the remote.

Page 42

Resetting the TV Settings

To reset the TV’s picture and audio settings:

1. Press the MENU button on the remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on the remote to highlight the Help icon and press OK. The Help menu is displayed.

3. Highlight Reset TV Settings and press OK. The TV displays, “Are you sure you would like to Restore Defaults? This will erase any custom settings.”

4. Highlight Yes and press OK.

5. Press the EXIT button on the remote.

Restoring the TV to Factory Default Settings

All of the on-screen menu settings can be reset to the factory defaults.

If you restore the TV to the factory default settings, all changes you have made to the settings will be lost!

To restore the TV to its factory default settings:

1. Press the MENU button on the remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on the remote to highlight the Help icon and press OK. The Help menu is displayed.

3. Highlight Clear Memory (Factory Default) and press OK.

4. Enter your parental control passcode. If you have not yet set up a parental passcode, enter the default, 0000.

The TV displays, “Are you sure you would like to Restore Defaults? This will erase any custom settings.”

5. Highlight Yes and press OK. The TV displays “Memory is being cleared. The TV will reset shortly.”

6. Wait for the TV to turn off. The TV will turn back on shortly afterward and the Setup App will begin.

Page 43

uSiNg the iNfO WiNdOW

The Info Window can be displayed by pressing the INFO or GUIDE button on the remote:

• Press the INFO or GUIDE button one time to display channel and input information.

• Press the INFO or GUIDE button two times to display the program title and closed captioning information.

• Press the INFO or GUIDE button three times to display the program description.

Program Title/CC Information

Oliver’s Holiday Surprise Ch 50-123

11:00AM - 12:00PM TV-PG (V) CC-OFF ENGLISH DOLBY 5.1 720p HD

Oliver wakes up one morning only to discover that his pals are missing. In this hourlong holiday special, Oliver goes on a journey in search of his pals. Who knows what he’ll encounter on the way?

Program Description

Channel/Input Information

LACT DTV CABLE

DIGITAL EPISODE GUIDE & INFO WINDOW

Page 44

Using the USB Media Player

USING THE USB MEDIA PLAYER

The USB Media Player allows you to connect a USB thumb drive to your TV and view photos.

Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model.

USB PORT

Playing USB Media

To play USB media, you must ﬁrst save your images onto a USB thumb drive.

Remember:

• The USB thumb drive must be formatted as FAT32.

• Files on the USB thumb drive must end in a supported ﬁle extension (.jpg).

To play your USB media:

1. Connect your USB thumb drive to the USB port on the side of the TV.

2. Highlight the Media App and press OK. The Media App launches.

3. Highlight your USB device in the list and press OK.

4. Highlight the type of media you wish to display: Photo. Press OK.

5. Use the Arrow buttons to highlight the ﬁle you want to display. Press OK. The ﬁle plays.

Connecting a USB Thumb Drive to the TV

1. Turn the TV off. Connect your USB thumb drive to the USB port on the back of the TV.

2. Press the Power/Standby button on the remote or touch the Power control on the side of the TV to turn it on.

Do not remove the USB thumb drive while the TV is on. Doing so may damage the drive.

You can display your photos in fullscreen. Select the photo, press OK, then highlight Fullscreen and press OK.

Page 45

Connected Sources

Displays connected USB devices. To change source, highlight it and press OK.

Back Button Highlight this button and press OK if you would like to return to the previous screen.

VIZIO

Photo

USB1:

Back Button

Highlight and press OK to return to left column.

Current Folder

Displays the folder path.

VIZIO_2GB\Photo\root

Folder Contents

This area displays the contents of the currently selected folder. You can browse between ﬁles using the Arrow and OK buttons on the remote.

Current Folder

Start Fullscreen Slideshow

Sort by Name

View Thumbnails/List

View Folder Settings

root

Start Slideshow

Sort:

View:

File Name: D 1920x1080 Resolution: 1920x1080 Size: 1607270KB

Name A-Z

Thumbnails

Settings

Photo Infomation

Displays name, resolution, and ﬁle size for currently selected photo.

A.jpg

D.jpg

G.jpg

B.jpg C.jpg

E.jpg F.jpg

H.jpg I.jpg

Page 1 of 1

Page Information

If your USB thumb drive has more ﬁles than can be displayed on a single screen, you can move between pages by highlighting this area and pressing Left/Right Arrow.

PHOTO VIEWER

Page 46

Troubleshooting & Technical Support

DO YOU HAVE QUESTIONS?

LET US HELP!

YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT

The VIZIO support team is highly trained and is based in the United States.

We can help with:

•

New Product Setup

•

Connecting Your Devices

•

Technical Problems

•

And More

Phone:

Email:

Web:

Hours of operation: Monday - Friday: 5 AM TO 9 PM (PST) Saturday - Sunday: 8 AM TO 4 PM (PST)

We speak English • Se habla Español • Nous parlons Français

(877) 878-4946 (TOLL-FREE) techsupport@VIZIO.com www.VIZIO.com/support

Page 47

The TV displays “No Signal.”

• Press the INPUT button on the remote control to select a

different input source.

• If you are using cable TV, satellite, or antenna connected directly to the TV, scan for channels. See

Scanning for Channels

There is no power.

• Ensure the TV is plugged into a working electrical outlet.

• Ensure the power cable is securely attached to the TV.

• Press the Power/Standby button on the remote or on the side of the TV to turn the TV on.

The power is on, but there is no image on the screen.

• Ensure all cables are securely attached to the TV.

• Ensure all devices are connected correctly. Devices differ; see your device’s user manual for details.

• Adjust Brightness, Contrast, or Backlight. See

the Advanced Picture Settings

• Press the INPUT button on the remote to select a different input source.

on page 27.

Adjusting

on page 21.

There is no sound.

• Press Volume Up on the remote control.

• Press the MUTE button on the remote to ensure mute is

off.

• Check the audio settings. See

Settings

On.

• Ensure no headphones are connected to the TV.

• Check the audio connections of external devices (Blu-ray player, game console, cable/satellite box) that are connected to the TV.

• If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.

The colors on the TV don’t look right.

• Adust the Color and Tint settings in the Picture menu. See

• Reset the picture settings. See

Settings

• Check all cables to ensure they are securely attached.

on page 24. Ensure the speakers are set to

Adjusting the Picture Settings

on page 23.

Adjusting the Audio

on page 20.

Resetting the Picture

The buttons on the remote aren’t working.

• Ensure you are only pressing one button at a time.

• Point the remote directly at the TV when pressing a button.

• Replace the remote batteries with new ones. See

Replacing the Batteries on page 9.

Page 48

The image quality is not good.

• For the best image quality, view high-deﬁnition programs using digital sources. Connect your devices with HDMI cables.

The picture is distorted.

• Nearby electrical devices may be interfering with the TV. Separate the TV from electrical appliances, cars, or ﬂuorescent lights.

• Ensure all cables are securely attached.

The display image does not cover the entire screen.

• If you are in RGB mode (computer), ensure that H-Size and V-Position in the on-screen menu are set correctly.

• If you are using TV, AV, or Component with 480i input, press the WIDE button on the remote to change the screen mode.

The TV has pixels (dots) that are always dark or always lit.

• Your HDTV is precision-manufactured using an extremely high level of technology. However, sometimes pixels may not display correctly. These types of occurrences are inherent to this type of product and do not constitute a defective product.

I see “noise” or static on the screen.

• When your TV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV’s display capabilities. This up-converting can sometimes cause irregularities in the image.

When I change input source, the volume changes.

• The TV remembers the volume level on each input source. If the volume level on the new input source is higher or lower than the level on the source you switch from, the difference may be noticeable.

• Use the Volume Up/Down buttons on the remote to adjust the volume.

When I change input source, the display image changes size.

• The TV remembers the viewing mode on each input source. If the viewing mode on the new input source differs from the one on the input source you switch from, the difference may be noticeable.

• See

Changing the Screen Aspect Ratio

on page 17

Page 49

Speciﬁcations

Screen Size: 32” Class 37” Class

Viewable Area: 31.50” 36.5”

E320-A0 E370-A0

Dimensions w/ Stand:

w/o Stand:

Weight w/ Stand:

w/o Stand:

TV Type: DLED DLED

Refresh Rate: 60 Hz 60 Hz

Maximum Resolution: 1366 x 768 1366 x 768

Pixel Pitch: .510 mm x .510 mm .592 x .592 mm

Response Time: 6.5 ms 8 ms

Brightness: 300 nits 300 nits

Viewing Angle: 178° (H) / 178° (V) 178° (H) x 178° (V)

HDMI Inputs: 2 2

Component Video Inputs: 1 1

28.82” x 19.21” x 5.76”

28.82” x 17.46” x 3.07”

14.77 lbs

14.11 lbs

33.08 x 21.62 x 7.46”

33.08 x 19.82 x 3.07”

14.52 lbs

13.42 lbs

Composite Inputs: 1 (Shared with Component) 1 (Shared with Component)

RF Antenna Input: 1 1

USB 2.0 Ports: 1 1

Audio Outputs:

Stereo 3.5mm Output,

Optical Digital

Stereo 3.5mm Output,

Optical Digital

Page 50

E320-A0 E370-A0

OSD Language: English, Spanish, French English, Spanish, French

Ambient Light Sensor: Yes Yes

Remote Control Model: XRT010 XRT010

Certiﬁcations:

Compliance: Energy Star Energy Star

Voltage Range: 120V @ 60 Hz 120 V @ 60Hz

Power Consumption: 35W 34W

Standby Power: <1W <1W

Zero Bright Pixel Guarantee: Ye s Ye s

CSA, CSA-US, FCC Class B,

HDMI 1.4, Dolby digital Plus

CSA, CSA-US, FCC Class B,

HDMI 1.4, Dolby digital Plus

Page 51

Limited Warranty

ON PARTS AND LABOR

Covers units purchased as new in United States and Puerto Rico Only. VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.

To obtain warranty service, contact VIZIO Technical Support via e-mail: TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from 5:00AM to 9:00PM Monday through Friday and 8:00AM to 4:00PM Saturday and Sunday, Paciﬁc Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.

Parts and Labor

There will be no charge for parts or labor during the warranty period. Replacement parts and Products may be new or recertiﬁed at VIZIO’s option and sole discretion. Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service or replacement, whichever is greater.

Type of Service

Defective Products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.

Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the covered Product to the VIZIO service center.

Limitations and Exclusions

VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modiﬁcations or adjustments, as well as installation and set-up issues or any repairs attempted by anyone

other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.

CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.

Personal Data

If your VIZIO product is capable of storing personal data and other information, ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product will be restored to you conﬁgured as originally purchased. You will be responsible for restoring all applicable data and passwords. Recovery and reinstallation of user data is not covered under this Limited Warranty. In order to protect your personal information, VIZIO recommends that you always clear all personal information from the unit before it is serviced, regardless of the servicer.

Zero Bright Pixel Defect Guarantee

This policy covers “zero bright pixel” defects for the duration of the limited “ONE YEAR WARRANTY” on select new product purchases. To determine if this guarantee applies to your product, refer to the “DETAILS” tab of the model’s product information page (www.VIZIO.com) or look for the “zero bright pixel” guarantee on the box.

Page 52

Legal & Compliance

FCC Class B Radio Interference Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice

1. The changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modiﬁcation to this equipment. It is the responsibilities of the user to correct such interference.

FCC warning

Changes or modiﬁcations not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.

Other

Image(s) used under license from Shutterstock.com

Page 53