Vivotek AW-GET-050A-065 Installation Guide

AW-GET-050A-065 PoE Switch

Quick Installation Guide

INTRODUCTION

The AW-GET-050A-065 is a GbE unmanaged PoE switch capable of feeding 15.4/30W (per port) power to Power over
Ethernet (PoE) devices. The switch is capable of a total of 60 Watts power budget.

PACKAGE CONTENTS

* 1x PoE switch * 1x Quick Installation Guide
* 1x power cord (type by the shipped-to area)

IMPORTANT:

1. Install the PoE switch in a ventilated and dry place, that is free from electromagnetic source, vibration, moisture, and
dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. Use CAT5 or 6 UTP/STP cables.

4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 65W.

CONNECTION

Front Panel Rear Panel

Uplink

Voltage regulator

LED DEFINITIONS

POWER Green ON Power is on and normal.

Green Off Power is off.

UPLINK Green ON 1000Mbps Ethernet port is connected.

Green fast blinking Data is being transmitted or received.
Yellow ON 10/100Mbps Ethernet port is connected.
Yellow fast blinking Data is being transmitted or received.
Off No connection.

LINK Green ON 1000Mbps Ethernet port is connected.

Green fast blinking Data is being transmitted or received.
Yellow ON 10/100Mbps Ethernet port is connected.
Yellow fast blinking Data is being transmitted or received.
Off No connection.

PoE Green ON Port is linked to a powered device.

OFF No device is connected.

All specications are subject to change without noice.

Copyright © 2015 VIVOTEK INC. All rights reserved.

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

|T: [phone]|F: [phone]| E: [e-mail]

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

|T: 408-773-8686| F: 408-773-8298| E: [e-mail]

VIVOTEK Europe

Randstad 22-133, 1316BW Almere, The Netherlands

T: [phone] E: [e-mail]