AW-FGT-100C-120 PoE Switch
Quick Installation Guide
INTRODUCTION
The AW-FGT-100C is a 8xFE PoE + 1xGE UTP + 1xGE SFP unmanaged PoE switch capable of feeding 15.4/30W (54V
max. per port) power to Power over Ethernet (PoE) devices. The switch is capable of a total of 115 Watts power budget.
PACKAGE CONTENTS
* 1x PoE switch * 1x Quick Installation Guide
* 2x rack mount ears * 1x power cord (type by the shipped-to area)
IMPORTANT:
1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. Use CAT5 or 6 UTP/STP cables.
4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 120W.
CONNECTION
Rack-mounting
Connections
- OR - - OR -
ConsoleNVRRouter / switch
Use SFP, LC type transceiver with 100Mbps or 1Gbps transfer speed in Single mode (10km,30km,50km,80km) or Multi
mode (0.5m or 2km) or Bidi (10km,30km,50km,80km).
LED DEFINITIONS
PWR Green ON Power is on and normal.
Green OFF Power is off.
LINK/ACT Green ON Ethernet port is connected.
Blinking Data is being transmitted or received.
Green OFF No connection.
GE Green ON Link speed at 1000Mbps
Green OFF Link speed at 10/100Mbps
PoE Orange ON Port is linked to a powered device.
Blinking Abnormal power supply is detected
Orange OFF No device is connected.
EXTENSIVE MODE DIP SWITCH
Power
200 meters (656 feet)
PowerData &
EXtensive Mode
802.3af/at PoE Camera
ST Mode: normal communication between port 1~10.
ST VLAN: 1-8 port can be isolated each other but 1-8 port can connect to 9~10 port after open VLAN to stop broadcast
Storm to increase forwarding rate of frame.
EX Mode: 1-8 port can be isolated each other but 1-8 port can connect to 9~10 port after open VLAN to stop broadcast
storm to increase forwarding rate of frame. The EX mode(Port 1 & 2), Up to 200m PoE distance allows you to expand
you network via Ethernet cable to where there is no power line or outlet but where you want to x device such as IP
Camera.
• EX mode reaches 802.3af/at(15.4W/30W) camera up to 200m@10Mbps via EXPoE ports
Restart the switch after changing the Extensive mode.
GROUNDING COLUMN
100-240V AC
50/60Hz, 2.5A Max
Power Socket
Grounding Column
The switch already comes with lightning protection mechanism. You can also ground the switch through the PE (Protecting
Earth) cable of AC cord or with Ground Cable.
All specications are subject to change without noice.
Copyright © 2017 VIVOTEK INC. All rights reserved.
VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|T: +886- 2-82455282|F: +886-2-82455532|E : sales@vivotek.com
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|T : 408-773-8686 |F : 408-773-8298 | E : salesusa@vivotek.com
VIVOTEK Europe
Randstad 22-133, 1316BW Almere, The Netherlands
T: +31(0)36-5298-434 E: saleseurope@vivotek.com