Vivotek AW-FGT-100A-120 User Manual

AW-FGT-100A-120 PoE Switch

Quick Installation Guide

INTRODUCTION

The AW-FGT-100A is an 8 port 10/100BaseT unmanaged PoE switch capable of feeding 15.4/30W (56V max. per port)
power to Power over Ethernet (PoE) devices. The switch is capable of a total of 120 Watts power budget.

PACKAGE CONTENTS

* 1x PoE switch * 1x Quick Installation Guide
* 2x rack mount ears * 1x power cord (type by the shipped-to area)

IMPORTANT:

1. Install the PoE switch in a ventilated and dry place, that is free of electromagnetic source, vibration, moisture, and
dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. Use CAT5 or 6 UTP/STP cables.

4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 120W.

CONNECTION

Front Panel Rear Panel

3

ON

OFF

100~240V

AC

7

LAN/PoE

- OR - - OR -

1

9

10

658

GE LAN GE SFP

4

2

ConsoleNVRRouter / switch

Use SFP, LC type transceiver with 100Mbps or 1Gbps transfer speed in Single mode (10km,30km,50km,80km) or Multi
mode (0.5m or 2km) or Bidi (10km,30km,50km,80km).

LED DEFINITIONS

POWER Green ON Power is on and normal.

Green Off Power is off.

10/100M
or GbE

Green ON Ethernet port is connected.
Fast Flashing Data is being transmitted or received.
Off No connection.

PoE Green ON Port is linked to a powered device.

OFF No device is connected.

All specications are subject to change without noice.

Copyright © 2014 VIVOTEK INC. All rights reserved.

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

|T: [phone]|F: [phone]| E: [e-mail]

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

|T: 408-773-8686| F: 408-773-8298| E: [e-mail]

VIVOTEK Netherlands B.V.

Busplein 36, 1315KV, Almere, The Netherlands

|T: [phone]| F: [phone]| E: [e-mail]