Vivotek AW-FET-160A-250 User Manual

AW-FET-160A-250 PoE Switch

Quick Installation Guide

INTRODUCTION

The AW-FET-160A is a 16 port 10/100BaseT unmanaged PoE switch capable of feeding 15.4/30W (56V max. per port)
power to Power over Ethernet (PoE) devices. The switch is capable of a total of 250 Watts power budget.

PACKAGE CONTENTS

* 1x PoE switch * 1x Quick Installation Guide
* 2x rack mount ears * 1x power cord (type by the shipped-to area)

IMPORTANT:

1. Install the PoE switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. Use CAT5 or 6 UTP/STP cables.

4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 250W.

CONNECTION

Front Panel

Rear Panel

LED DEFINITIONS

POWER Green ON Power is on and normal.

Green Off Power is off.

10/100M Green ON Ethernet port is connected.

Fast Flashing Data is being transmitted or received.
Off No connection.

PoE Green ON Port is linked to a powered device.

OFF No device is connected.

All specications are subject to change without noice.

Copyright © 2014 VIVOTEK INC. All rights reserved.

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

|T: [phone]|F: [phone]| E: [e-mail]

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

|T: 408-773-8686| F: 408-773-8298| E: [e-mail]

VIVOTEK Netherlands B.V.

Busplein 36, 1315KV, Almere, The Netherlands

|T: [phone]| F: [phone]| E: [e-mail]