Vivotek AW-FET-081B-065 Installation Guide

AW-FET-081B-065 PoE Switch

Quick Installation Guide

INTRODUCTION

The AW-FET-081B-065 is a 10/100BaseT unmanaged PoE switch capable of feeding 15.4/30W (per port) power to
Power over Ethernet (PoE) devices. The switch is capable of a total of 60 Watts power budget.

PACKAGE CONTENTS

* 1x PoE switch * 1x Quick Installation Guide
* 1x power cord (type by the shipped-to area)

IMPORTANT

:

1. Install the PoE switch in a ventilated and dry place, that is free electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the switch are not blocked.

3. Use CAT5 or 6 UTP/STP cables.

4. AC input (100~240V/AC, 50~60Hz), for a max. consumption of 65W.

CONNECTION

Front Panel Rear Panel

PoE cameras / Extenders Uplink

3 5

4 6

7

8

10/100M

PoE

10/100M

PoE

4xFE PoE + 4xFE Switch

1

PWR

2

LED DEFINITIONS

POWER

Green ON Power is on and normal.
Green Off Power is off.

10/100M

Green ON Ethernet port is connected.
Fast Flashing Data is being transmitted or received.
Off No connection.

PoE

Green ON Port is linked to a powered device.
OFF No device is connected.

All specications are subject to change without noice.

Copyright © 2016 VIVOTEK INC. All rights reserved.

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

|T: [phone]|F: [phone]|E : [e-mail]

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

|T : 408-773-8686 |F : 408-773-8298 | E : [e-mail]

VIVOTEK Europe

Randstad 22-133, 1316BW Almere, The Netherlands

T: [phone] E: [e-mail]