Vivotek AM-713 Installation Guide

VIVOTEK Mounting Accessories

Installation

II

AM-713 Junction Box

Installation Guide

Revison History:

Rev. 1.0: Initial release

Compatible VIVOTEK Cameras

I

Compatible cameras/brackets

FD836B-HTV, FD836B-EHTV, FD836B-HVF2, FD836B-EHVF2, FD8382-TV, FD8382-ETV, FD8382-VF2, FD8382-EVF2, FD9381-HTV,
FD9381-EHTV, FD9371-HTV, FD9371-EHTV

Mounting Dimensions

51.00 51.00

5.20

51.0051.00

Part no.: 625031300G
Accessory Ordering part no.: 100138700G, AM-713_V01

Package Contents

Remove the top cover and unhook the tether wire.

1

Attach the included alignment sticker to a preferred position. Drill holes
on the wall and install the junction box. If space behind the wall allows,
you may also pass cables through the wall.

2

A 3/4" conduit is required for routing the cables with waterproof
connection.

3

Install the cable gland and pass cables through it.

4

Remove the dome cover and waterproof connectors.

5

Pass cables through the center hole on the top cover. Secure the
top cover by driving screws.

6

Pass cables through the routing holes and install the camera to box by
driving screws.

7

Connect cables to the Ethernet port and terminal block.

8

Open a live view console and adjust the shooting direction. Refer to the
camera's QIG for more information.

Secure the camera top cover.

9

Connect the PoE IN and PoE OUT cables.

Put tags on the cables marking their intended use.

Optional Installation

You can also install a PoE extender (AP-FXC-0200) to the box.

Attach a desiccant bag to the inside of the box. Note that the
installation should be completed within 30 minutes so that
desiccant remains effective.

PoE OUT

PoE OUT

to camera

to another conduit
box

PoE IN

UPLINK

POWER

4xFE PoE + 1xFE Switch

1 234

PoE switch

100m 100m 100m

UPLINK

PoE

LAN

OFF

PoE

ON

ON

1 2 3 4

AP-FXC-0200
PoE Extender