Vitamix Vita-Prep, Vita-Prep 3 Owner's Manual

Vi t a -Pr e p ® a n d Vi t a -Pr e p ® 3
VM0101 and VM0101D
Se c t i o ns
English......................................................................................................................................................................................................................	1
French......................................................................................................................................................................................................................	9
Spanish...................................................................................................................................................................................................................	17
Sy m b o ls
Warning	Caution
NEVER touch moving parts. Keep hands	Operate with the lid and lid plug in place
and utensils out of the container
Electric Shock Hazard	Read and understand the owner’s manual
High temperature when blending hot	Do not immerse
liquids
DO NOT insert items into the container	l/O On/Off
while the blender is in use

Unplug while not in use, before cleaning, changing accessories or touching parts that move while the blender is in use

Recyc l i n g In form at i o n

This product has been supplied from an environmentally aware manufacturer.

This product may contain substances that could be harmful to the environment if disposed of in places (landfills) that are not appropriate according to legislation.

The 'crossed-out wheelie bin' symbol is placed on this product to encourage you to recycle wherever possible. Please be environmentally responsible and recycle this product through your recycling facility at the end of its life.

Vita-Mix® Corporation

Commercial Division

To see the complete line of Vitamix products, visit vitamix.com.

8615 Usher Road, Cleveland, Ohio 44138 U.S.A. Tel: [phone] Email: [e-mail]

Importa n t Instru c t i o ns for Sa f e Use

WARNING

To Avoid Injury.

Read and understand the instruction manual before using this machine. Basic safety precautions should be followed, including the following.

WARNING

Electrical Shock Hazard.

ONLY use an earthed outlet. DO NOT remove the earth. DO NOT use an adaptor.

DO NOT use an extension cable.

Failure to follow instructions can cause death or electric shock.

READ ALL INSTRUCTIONS, SAFEGUARDS AND WARNINGS BEFORE OPERATING THE BLENDER.

1.Read all instructions.

2.Close supervision is necessary when any appliance is used by or near children or incapacitated persons.

3.This blender is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

4.To protect against the risk of electrical shock, do not put the blender base in water or other liquid.

5.Unplug the appliance from outlet when not in use, before putting on or taking off parts, and before cleaning.

6.Avoid contact with moving parts.

7.DO NOT operate any appliance with a damaged cable or plug, or if the appliance malfunctions or is dropped or damaged in any manner. Contact your retailer or distributor at once for examination, repair, replacement, or electrical or mechanical adjustment.

8.Alteration or modification of any part or component of the blender assembly, including the use of any part, component or accessory that is not a genuine authorised Vitamix part, may cause fire, electric shock or injury.

9.The use of attachments not expressly authorised or sold by Vitamix for use with this blender, including preserving jars, may cause fire, electric shock or injury.

10.If your machine is equipped with a variable-speed functionality, always start at lowest speed setting.

11.DO NOT use the appliance for purposes other than its intended use.

18.DO NOT leave foreign objects, such as spoons, forks, knives or the lid plug, in either container as this will damage the blades and other components when starting the machine, and may cause injury.

19.Never attempt to operate the blender with damaged blades.

20.The lid and lid plug MUST be firmly in place during blending. The lid plug should be removed only when adding ingredients and when using the tamper.

21.When making nut butters use tamper to shorten processing time. When blending oil-based foods, do not process for more than one minute after the mixture starts to circulate in the container. Processing for longer periods can cause damage to the container and motor overheating.

22.Do NOT expose the container to temperatures over 210°F (99°C). Do NOT expose the container to hot liquids or ingredients over 210°F (99°C).

23.Do not leave blender unattended when in use.

24.Use caution. Escaping steam or splashes may scald. Never start on the highest speed when blending hot ingredients.

25.The lid plug should be removed only when adding ingredients and when using the tamper.

26.Always start the blender with the variable speed dial set to 1 and the High/Low switch in the low position. Never start on speeds above 1 or with the High/Low Switch in the high position when blending hot liquids to avoid possible burns.

SAVE THESE INSTRUCTIONS

IMPORTANT NOTES!

12.The maximum normal load is equivalent to the ounces (liters) listed on the container, i.e., 64 oz. / 2.0 Ltr., 48 oz. / 1.4 Ltr. and substantially less with thick mixtures.

13.DO NOT use outdoors.

14.DO NOT let the cable hang over the edge of the table or work surface or make contact with hot surfaces, including the hob.

15.Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons, or damage to the blender. The tamper can be used during blending in the container. A rubber scraper or spatula may be used, but only when the blender is not running. Do not leave a tamper, scraper or any other utensil in the container either when running or when the motor is stopped.

16.Blades are sharp. When cleaning the container, use care to avoid injury.

17.To reduce the risk of injury, never place the blade assembly on the motor base unless assembled to the container.

The instructions appearing in this Use and Care Manual cannot cover every possible condition and situation that may occur. Common sense and caution must be practiced when operating and maintaining any appliance.

IMPORTANT INSTRUCTIONS FOR SAFE USE

Do not leave your Vitamix blender unattended when operating.

Any repair and servicing, or the replacement of parts, must be performed by Vitamix or an authorised service representative.

NOTICE: FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS AND IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR VITAMIX BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF SERIOUS INJURY.

2

Co m m erc i a l War ra n t y

Maintaining your Vitamix® Blender

InordertomaximizethelifeofandkeepyourVitamix®productingoodworkingorder,itis importantthatyoufollowafewsimplemaintenancetips:

1.Periodically inspect the drive socket for visible wear and tear, cracks, or breaks to the socket. If damage is found, replace the drive socket with the extra drive socket enclosed with your blender. To purchase additional replacement drive sockets contact Vita-Mix® Corporation (hereinafter “Vitamix”) at 1-800-437-4654. For customers outside the U.S.A., contact your authorized Vitamix Distributor, or call the Vitamix International Division at +1.440.782.2450 or email [e-mail] (US&Canada)[e-mail](outsideofUSandCanada)forassistance.

2.Manually rotate the blade bearing assembly to make sure it turns without hesitation or doesn’t spin too freely. If the blade hesitates or spins too freely, contact Vitamix for warrantyinformationoradealernearyou.

3.Never run the machine without the centering pad properly placed on the base and neverremovethecontainerfromthebasebeforebladeshavestoppedmoving.

Limited Warranty - (Unless otherwise covered by Contract)

Vita-Mix® Corporation (hereinafter “Vitamix”) warrants to the original end-user (“Purchaser”)thatitscommercialVitamixblenders(consistingofamotorbase,container and lid, hereinafter collectively referred to as the “Equipment”) will be free from defects in material and workmanship for the warranty periods applicable to the Equipment as described herein and subject to the conditions set forth below. Proof of purchase is required.

The following are the sole remedies of the Purchaser and set forth the only warranty obligationsofVitamix.

No employee of Vitamix or any other person is authorized to make any warranty in additiontooramendmentofthefollowingwarranties.

What is Covered Under Warranty

A.Motor Base (which includes the control board and touch pad) Warranty Vitamixwarrantstotheoriginalend-userthat:

•Ifthemotorbasefailsduetodefectsinmaterialorworkmanshipwithinthirty(30) days from the date of purchase, then Vitamix will replace the motor base with a new motorbase.

•If the motor base fails due to defects in material or workmanship after thirty (30) daysfromthedateofpurchasebutwithinone(1)yearfromthedateofpurchase,then Vitamixwillassumethecostofallpartsandlabornecessarytorepairthemotorbase.

•Ifthemotorbasefailsduetodefectsinmaterialorworkmanshipafterthefirstyear butwithinthree(3)yearsfromthedateofpurchase,thenVitamixwillassumethecost ofallpartsnecessarytorepairthemotorbase.

B.Container, Lid, Lid Plug, Centering Pad Blade Assembly, Drive Socket, and Sound Enclosure (if included) Warranty. Vitamix warrants to the original end-user that if a sound enclosure, container, lid, blade assembly, or drive socket fails due to a defect in materials or workmanship within one (1) year from the date of purchase, Vitamix will assumethecostofallpartsandlabornecessarytorepairthecomponent.

ThesoleobligationofVitamixunderthesewarrantiesistorepairorreplacethewarranted partorpartsasdeterminedexclusivelybyVitamix.

IN NO EVENT, WHETHER BASED ON CONTRACT, INDEMNITY, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, SHALL VITAMIX BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER INCLUDING, WITHOUT LIMITATION, LOSS OF PROFIT OR REVENUE. THE ABOVE LIMITED WARRANTY IS YOUR EXCLUSIVE REMEDY, AND YOU AND VITAMIX HEREBY EXPRESSLY DISCLAIM ALL OTHER WARRANTIES OR CONDITIONS,EXPRESSORIMPLIED,STATUTORYOROTHERWISE,INCLUDINGANY IMPLIED WARRANTY OF MERCHANTABILITY AND ANY IMPLIED WARRANTY OF FITNESSFORAPARTICULARPURPOSE,AND,WITHOUTLIMITINGTHEGENERALITY OF THE FOREGOING, YOU AND VITAMIX HEREBY EXPRESSLY EXCLUDE, TO THE EXTENT PERMITTED BY LAW, THE APPLICATION OF ANY SALE OF GOODS LEGISLATION AND THE UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONALSALEOFGOODS,ASMAYBEAPPLICABLE.

Somejurisdictionsdonotallowalimitationonimpliedwarrantiesoronspecial,incidental orconsequentialdamages.

What is Not Covered Under Warranty (Coverage Exclusions)

Thesewarrantiesdonotincluderepairsneededdueto:

A.Normalwear-and-tear;

B.Abuse,misuse,negligentuse;

C.AlterationoftheEquipmentincludingbutnotlimitedtothemotorbase,container,lid orsoundenclosure;

D.Exposuretoextremeconditions;or

E.ImproperinstallationoftheEquipment,includingbutnotlimitedtopoorworkmanship, notfollowingspecificationsprovidedand/orinadequateventilationofthe“in-counter” modelsoftheblendingunit.

When do the Warranties Apply (Coverage Conditions)

Thewarrantiescontainedhereinrunonlytotheoriginalend-userandarenottransferable. Tomakeawarrantyclaim,proofofpurchaseisrequired.

Any warranty offered by Vitamix is only valid if used in accordance with: a) the owner’s manual that may also be accessed at www.vitamix.com; b) the express warranty; and c) anyandallmaintenanceinstructionsregardlessofwhentheyaresupplied.

What Causes the Warranty to be Void

Allproductwarrantiesarevoidif:

•TheblenderisplacedinasoundenclosurenotmanufacturedbyVitamix.

•Any component of a covered piece of Equipment or part has been modified, altered, “reconditioned” or repaired by persons someone other than Vitamix, an authorized VitamixServiceCenteroranauthorizedVitamixDistributor.

•AnycoveredVitamixcomponentisusedwithacomponentnotexpresslyauthorized in writing by Vitamix (i.e. using a Vitamix container with a non-Vitamix motor base and/orusingaVitamixmotorbasewithanon-Vitamixcontainer);or

•Any part of the blender is improperly installed, including but not limited to poor workmanship, not following specifications provided and/or inadequate ventilation of the“in-counter”models.

How to Obtain Warranty Coverage and Repair

Who to Contact For Warranty Service and Repair. In the event your Vitamix blender needs service or repair covered by the terms of this warranty, please call the Vita-Mix Corporation,anauthorizedservicecenteroralocaldistributorforwarrantyassistance.

•ForEquipmentpurchasedandlocatedintheUSandCanada,callVitamixCommercial CustomerServiceat:800-437-4654.

•For Equipment purchased outside US and Canada, contact your authorized Vitamix Distributor,orcontacttheVitamixInternationalDivisionat+1.440.782.2450.

•Emailcontacts:intheUSandCanada:[e-mail] andCanada:[e-mail].

YouwillbeaskedtoprovideproofofpurchasefortheEquipment.Iftheremotetechnical supportteamcannotfixtheEquipmentremotely,theEquipmentwillneedtobeserviced. The team will help you either locate an authorized service center or arrange for the EquipmenttobeshippedbacktoVitamix.

How to Ship the Equipment to Vitamix for Service

A.Obtain a Return Authorization Number Before Shipment. Do not return or send in EquipmentwithouttheapprovalfromVitamix.UndernocircumstanceswillVitamix beresponsibleforthecostofanyunauthorizedrepairs.AllEquipmentreturnsmust have theReturn Authorization Number (“RA”) clearly marked on theoutsideof the box. Any Equipment that is sent to Vitamix without prior authorization or approval willbereturnedtotheshipper’saddress“asis”withoutrepair.

B.Properly Package The Returned Item. Any item sent to Vitamix must be sent in originalorsufficientpackaging.

Spe c i f i c at i o ns

Vita-Prep		Vita-Prep 3
Volts:	120 VAC	Volts:	120 VAC
Amps:	11.5 (2.3 peak hp*)	Amps:	13 (3 peak hp*)
Hz:	50/60	Hz:	50/60

3

Parts a n d Fe at ures

1	Control Panel: For more information, refer to Control Panel.
	CAUTION: Lids and tampers are not interchangeable between
				4
	different container styles, types and sizes.
	64-oz. capacity container with 2-part lid:
2
				2
	•	Always use the lid and the lid plug when the machine is
		operating.
	• Never operate the blender without the lid securely locked
		in place.
	• Ounces, Milliliters and Cups are clearly marked.
	•	Insert the lid plug through the lid and secure by turning
		clockwise.

• Remove the lid plug to use the tamper or to add ingredients.		3

3Tamper: Using the tamper maintains circulation by preventing air pockets from forming.

4Two Piece Lid: (lid and lid plug)

To Lock the Lid in Place: The lid must always be secured when processing, especially hot liquids that may scald. Never operate the blender without the lid securely locked in place. The lid has a continuous rim which latches inside the container tabs. Push one side of the rim under one tab and push down over the opposite tab to snap the lid into position.

To Remove the Lid: Place hands around the lid, pressing		1
thumbs above one of the container tabs. Push in and lift off.
To Remove the Lid Plug: Rotate the lid plug counterclockwise
from the “locked” to “unlocked” position and lift out.

5Power Cord: The blender’s power cord comes equipped with a three-prong (grounding) plug which mates with a standard three-prong wall outlet. This cord will vary for countries outside the United States of America.

Adapters are available for two-prong outlets. Do not cut or remove the third (ground) prong from the plug or power cord. Consult your electrician if you are not sure if the wall outlet

is grounded through the building wiring. With a properly	5
grounded two-prong wall outlet, ground the machine by
attaching the tab on the adapter to the wall outlet cover by
means of the screw in the center of the cover.
FIGURE A	FIGURE B

Co n trol Pa n e l

1.On/Off Switch: This is a lighted switch. When the switch is lit, the power is on. Located on the front of the machine below the control panel (Figure A). The On/Off switch controls the power to the machine. While plugged in, switch to on to ready the machine for blending. Shut off the power switch at night or whenever the machine will be left unattended.

2.Start / Stop Switch: Depress the start switch to begin blending. Depress the switch again to stop the blend.

3.High/Variable Switch: High () is the fastest speed available. Switch to

Variable ( ) to activate the variable speeds. Always make sure that the

High/Variable Switch is set to Variable ( ) before moving the On/Off Switch to the On (|) position. Do not start your machine on High ().

4. Variable Speed Dial: Selects many speed settings. It is active only when the High/Variable Switch is set in the Variable ( ) position.

2
	3	1

Note: Your machine’s control panel may look different from this illustration.

FIGURE A

4

Ta mper

CAUTION

WARNING

Rotating Blades Can Cause Damage.

Lids and tampers are not interchangeable between different container styles, types, and sizes. Use the tamper that was supplied with your machine.

How to Determine the Tamper that Can Be Used with Your Container

The tamper is designed to be used safely and efficiently with the commercial containers. If a tamper came with your container, it is the correct tamper for the container.

To verify that you are using the correct tamper, place the lid on an empty container, remove the lid plug and insert the tamper. The tamper should fit easily into the lid opening but not make contact with the blades no matter how you move the tamper inside the container. IF THE TAMPER TOUCHES THE BLADES AT ANY ANGLE - DO NOT USE THE TAMPER WITH YOUR

CONTAINER.

If you do not have the correct tamper for your container, contact Vitamix Customer service in the US and Canada at 800- 437-4654 or email [e-mail]. Outside of the US and Canada at +1.440.782.2450 or email international@vitamix. com. If technical assistance is needed, email: commercialts@ vitamix.com.

Rotating Blades Can Cause Severe Injury.

DO NOT put hands, spatulas, etc. in the container while the machine is running or while the container is still on the base.

Lids and tampers are not interchangeable between different container styles, types, and sizes. Use the tamper that was supplied with your machine.

Do not force the tamper into the 32 oz. Container.

Do not use a tamper without a step in any Vitamix commercial container.

IMPORTANT!

•The splash disk (near the top of the tamper) and lid prevent the tamper from hitting the blades when the lid is secured properly in the locked position.

•The container should not be more than two-thirds full when the tamper is used during blending.

•If the food does not circulate, the machine may have trapped an air bubble. Carefully remove the lid plug while making sure the lid stays firmly in place. Release the air bubble by inserting the tamper through the lid plug opening. Continue to use the tamper to press ingredients into the blade to shorten processing time.

•Holding the tamper straight down may not help the ingredients circulate. If necessary, point the tamper toward the sides or corners of the container. DO NOT try to force the tamper deeper into the container.

Tamper

Tamper Splash Disk

	32 oz. (0.9 L)	48 oz. (1.4 L)	64 oz. (2 L)	Lid
	container	container	container
	Step	No Step

Step	Blade Assembly

5

Operat i n g Instru c t i o ns

WARNING

Do NOT expose the container to temperatures over 210°F (99°C). Do NOT expose the container to hot liquids or ingredients over 210°F (99°C).

Do not leave blender unattended when in use.

Use caution. Escaping steam or splashes may scald. Never start on the highest speed when blending hot ingredients.

The lid plug should be removed only when adding ingredients and when using the tamper.

Always start the blender with the variable speed dial set to 1 and the High/Low switch in the low position. Never start on speeds above 1 or with the High/Low Switch in the high position when blending hot liquids to avoid possible burns.

Best Blend Quality and Machine Performance - Ingredient Temperature:

Freezer temperature: 0º F (-17.7º C)

Note: blending ingredients at a temperature less than 0º F (-17.7º C) is not recommended.

• Process on the High ( ) setting for as much of the processing time as possible to make whole food juices, soups, shakes, frozen mixtures, purées, nut butters and for grinding grains. Processing times will generally be less than one minute (most take less than 30 seconds).

•TIP: Blending too long at too low a speed setting will overheat the machine and cause the Automatic Overload Protection to turn the

machine off. Blending on High ( ) uses the motor’s cooling fan to avoid overheating.

• When on the High ( ), if the food does not circulate, carefully remove the lid plug while making sure the lid stays firmly in place. Release the mixture by inserting the tamper through the lid plug opening. If circulation problems continue, reduce the machine speed. A lower speed may allow food to circulate when a higher speed does not. Add liquid if necessary. DO NOT overfill. Once the food is circulating freely, increase the speed back to High ( ) and continue processing.

•When making nut butters use tamper to shorten processing time. When blending oil-based foods, do not process for more than one minute after the mixture starts to circulate in the container. Processing for longer periods can cause damage to the container and motor overheating.

•Due to the machine’s speed, processing times are much quicker than standard appliances.

•Automatic Overload Protection: Your Vitamix motor is designed to protect itself from overheating. If the motor shuts off, press the On/ Off switch to Off. Turn the power switch on after 5 minutes to check if blender is reset and ready to operate. The blender might require up to 45 minutes to reset.

1.Make sure that the Variable Speed Dial is set to 1.

2.Load the container before placing it on the motor base. Place liquids and soft foods in the container first, solid items and ice last.

3.Securely fasten the 2-part lid. Always use the complete 2-part lid when blending (unless the tamper is inserted through the lid plug opening). When blending hot ingredients, make sure the lid is securely latched.

4.With the motor off, set the wet blade container on the motor base by aligning it over the centering pad. Do not attempt to put a container on an operating motor base or to operate a motor base without a container properly in place.

5. Start with the High/Variable Switch in the Variable ( ) position. Always start your machine on variable speed 1. Activate the machine by turning the On/Off Switch to On. Press the Start/Stop switch. Slowly increase to the desired speed. Your container will shift and get into an aligned position.

6.Take proper care when handling and processing hot ingredients and making hot soups and sauces.

7.After turning the machine off, wait until the blades completely stop before removing the lid or container from the motor base.

Care a n d Cl e a n i n g

WARNING

Electrical Shock Hazard.

Disconnect power before cleaning machine.

Failure to follow instructions can cause death or electrical shock.

Normal Cleaning:

1.Fill the container half full with warm water and add a couple drops of liquid dish washing detergent to the container. Snap or push the complete 2-Part lid into locked position.

2.Select variable speed 1. Turn machine on and slowly increase speed to variable speed 10, then to High. Run the machine on High speed for 30 to 60 seconds.

3.Turn the machine off. Rinse and drain the container.

To Sanitize:

1.Complete the Normal Cleaning instructions above.

2.Fill the container half full with water and 1-1/2 teaspoons of liquid bleach. Snap or push the complete 2-Part lid into locked position.

3.Select variable speed 1. Turn machine on and slowly increase speed to variable speed 10, then to High. Run the machine on High speed for 30 to 60 seconds.

4.Turn off the machine, and allow mixture to stand in the container for an additional 1-1/2 minutes.

5.Pour bleach mixture out. Allow container to air dry. Do not rinse after sanitizing.

Lid, Lid Plug and Tamper

Separate the lid and lid plug. Wash the parts in warm soapy water. Rinse clean under running water, and dry. Reassemble before use.

Motor Base:

1.Unplug the power cord.

2.Wash the outside surface with a damp soft cloth or sponge, which has been rinsed in a mild solution of liquid detergent and warm water. Do not place the motor base in water.

3.The centering pad can be removed for more thorough cleaning.

4.Thoroughly clean the switches so they work freely. They may become sticky from use. Moisten a cotton swab with a household degreaser or cleaner and clean the grooves around the switches. Immediately dry all surfaces.

5.Polish with a soft cloth.

6

Tro u b l esh o ot i n g

Problems:		Possible Actions:
•	Increased vibration	a.	Check the blade assembly for loose, damaged
• Leaking from the bottom of the			or nicked components and replace.
	container	b.	Tighten the retainer nut with the retainer nut
•	Increased container noise		spanner, moving clockwise until it is snug.
• Machine will not run		a.	Double-check to make sure that the power
			cable is firmly in the power socket.
		b.	Check to make sure that the switches are
			clean and moving freely.
		c.	The thermal protector may have shut the
			machine off. If the motor shuts off, press the
			On/Off switch to Off. Turn the power switch
			On after 5 minutes to check if blender is reset
			and ready to operate. The blender might
			require up to 45 minutes to reset.
• Loud noise from blades		a.	Drive socket may be broken. Check for a fine
•	Blades don’t spin		crack down the center, or worn teeth, replace
			with a new drive socket (Item No. 891).
			Instructions are included with the part.
		b.	Blade bearings need to be replaced. Spin the
			blades using the drive spindle at the bottom
			of the container. If the blades spin freely with
			no resistance, replace the blade assembly.
• The machine will not run when the		Check the On/Off switch to make sure that the
	Start/Stop switch is activated	switch is in the on position. Note: The Start/Stop
		switch is lit when the power is on.

If you cannot fix your machine with these suggestions, technical help is available by calling Vitamix® technical support on [phone]. If you purchased your equipment outside the U.S.A., contact your local Vitamix Distributor or telephone the Vitamix International Division on [phone] or email [e-mail] to find a distributor in your country. For online help, visit www.vitamix.com/commercial.

IMPORTANT NOTES!

NOTE: The thermal protector may have shut the machine off. If the motor shuts off, press the On/Off switch to Off. Turn the power switch On after 5 minutes to check if blender is reset and ready to operate. The blender might require up to 45 minutes to reset. Cooling may be quickened by placing the motor base in a cool spot. Unplug first. To speed up the process, try circulating the air with a vacuum or fan aimed at the bottom of the base. When the thermal protector shuts off the motor, review your processing techniques and your instructions.

Your recipes may be too thick (add liquid), be processed for too long at too low a speed setting, or have too much material in them. If the motor seems to be overheating but the thermal protector has not turned the machine off, stop the machine and remove the container from the base.

7

Vita-Mix® Corporation

8615 Usher Road

Cleveland, OH 44138 U.S.A.

vitamix.com

©2017 Vita-Mix® Corporation. No part of this publication may be reproduced or transmitted in any form or by any means or stored in a database or retrieval system without the written permission of the Vita-Mix® Corporation.

123296_REV A 2/17 ENG/FC/SPA

8