Vita-mix 3600 Plus User Manual

Item #63 Vita-Mix® Instructions

Container Agitator Assembly Replacement

Step 1 – Installation of the new assembly: The new assembly is pre-assembled and only requires removal of the large hexagonal nut before installation. Put the blade assembly in place, making sure the rubber gasket stays with the assembly. Install the large retainer nut tightly to hold the assembly in place.

	Action Dome Assembly	4000 & 3600 Plus Container Assembly	Motor Parts 4000, 3600 Plus
			& Converted 3600
	Item: Action Dome	Item: Agitator	Truss Head Screw
	#207 (Complete –	#63 Assembly
	includes all	Item: Gasket
	items below		12-Point Driver
		#63
	Tube for	Item: Spigot Bushing
		#287 and Seal Kit
	Action Dome
	Action Dome	Stainless Container	Item #63 – Agitator Assembly (3600 Plus/4000)
		(not available)
	Item #665:	Container Handle
		(not available)
	Action Dome		Item: Agitator
	Clips	Item: Spigot
			#63 Assembly
		#50 Assembly
	Item #665:	Item: Spigot Washer
		#50
	Action Dome
	Seals	Item: Brass Retainer	Gasket
		#63 Nut
			Brass Retainer Nut

Parts available For Discontinued 64 oz. Polycarbonate Container		Important Warning About Tamper
64 oz. Container Set	Lid Plug Only	Item #W00-001:
		Wooden Tamper
		Use ONLY with
	Item:Lid Assembly	the Action Dome
		(Item #207.)
	#1191
		Item #760:
	Lid Only	New Tamper
		Use ONLY with
		Lid Assembly
		Item #1191.
	Item: Polycarbonate
	#795 Container (64 oz.)
	Item:Blade Assembly
	#15517

Item:Retainer Nut

#836

8615 Usher Road		200-1701 Shepherd St. East
Cleveland, Ohio 44138	E-Mail: [e-mail]	Windsor, Ontario N8Y 4Y5
[phone] • www.vitamix.com	Web: www.vitamix.com	[phone] • www.vitamix.com