Vision Fitness S70 User Manual
TO OLS & PARTS INCLUDED
Screwdriver
6mm L-Shaped Wrench
Multi-Wrench,
Qty. 2
8mm L-Shaped Wrench
5mm L-Shaped Wrench
PARTS BOX
Power Cord
Console Mast
Console Mast Boot
Accessory Tray
Color-coded Hardware Bags
Owner’s Guide
Assembly Guide
Warranty Card
6mm T-Shaped Wrench
1600 Landmark Drive • Cottage Grove, WI 53527
toll free 800.335.4348 • fax 608.839.8731
www.visionfitness.com
2009 Vision Fitness. All Rights Reserved. May be covered by one or more patents or patents pending: US 5540637, US 5573480,
US 5813949, US 5813949, US 5924962, US 5938567, US 6135927, US 6149551, US 7316633, TW 364373, TW 371899, CN 99808486.7
5.09
AG18.57PRD
REV3
ASSEMBLY
S70
SUSPENSION ELLIPTICAL
TRAINER
™
GUIDE
S70_AG_091217.indd 1 12/17/09 2:48 PM
S70
SUSPENSION ELLIPTICAL TRAINER
HA RDWA RE INC LUDE D
To avoid possible damage to this Suspension Elliptical™ Trainer, please follow assembly steps in the correct order. Before proceeding,
find your new Suspension Elliptical™ Trainer’s serial number located on the front axle tube, and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
Be sure to read your Owner’s Guide before using your new Suspension Elliptical™ Trainer.
If any parts, hardware or tools are missing, please call 1.800.335.4348
NOTE: It is recommended that you apply grease to the threads of each bolt and screw as you assemble your Suspension Elliptical™
Trainer to prevent loosening and noise. Also, during each assembly step, ensure that ALL bolts and screws are in place and partially
threaded in before completely tightening any ONE bolt or screw.
HA RDWA RE INC LUDE D
PINK BAG
M8x30L Socket Head Bolt
Quantity: 4
ORANGE BAG
M8x12L Flat Head Bolt
Quantity: 2
8.2x16x1.4T Washer
Quantity: 4
M8x20L Socket Head Bolt
GREEN BAGS x2
Quantity: 4
M8 Lock Washer
Quantity: 4
BLACK BAGS x2
M5x25L Phillips Head Bolt
Quantity: 4
YELLOW BAG
M10x65L Socket Head Bolt
BLUE BAGS x2
M12 Lock Washer
Quantity: 1
Quantity: 4
M12 Hex Nut
Quantity: 1
M12x95L Hex Bolt
Quantity: 1
8x13x1.4T Washer
Quantity: 8
M8 Nylon Nut
Quantity: 4
RED BAG
M5x15L Phillips Head Bolt
Quantity: 2
M8x50L Socket Head Bolt
Quantity:1
M8x20L Socket Head Bolt
Quantity: 4
M5x50L Phillips Head Bolt
Quantity: 1
M5 Hex Nut
Quantity:1
M8 Lock Washer
Quantity: 4
M8 Nylon Nut
Quantity:1
M5x12L Round Head Bolt
Quantity:2
8.2x12.8x1.3H
Safety Washer
Quantity:4
Quantity:2
M8x15L Socket Head Bolt
Quantity:4
End Cap
Loading...