Vinten Radamec Quattro SE PDA User Manual
Vinten Radamec
Quattro PDA
Operators Guide
V4015-4980
Robotic Camera Control Systems
Quattro PDA
Operators Guide
Original Instructions
Publication Part No. V4015-4980 Issue 2
Copyright © Vitec Group plc 2009
All rights reserved throughout the world. No
part of this document may be stored in a
retrieval system. transmitted, copied or
reproduced in any way including, but not
limited to, photocopy, photograph, magnetic
or other record without the prior agreement
and permission in writing of Vitec Group plc.
Trademarks
Vinten Radamec® and Vinten® are
registered trademarks of the Vitec Group plc.
Windows Mobile® is a registered trademark
of the Microsoft Corporation.
Important information about this document
Information contained in this document is
subject to change. Camera Dynamics
Limited reserves the right, without notice, to
make changes in equipment design or
performance as progress in engineering,
manufacturing or technology may warrant.
Published by:
Technical Publications Department
William Vinten Building
Western Way
Bury St Edmunds
Suffolk IP33 3TB
UK
Tel: +44 1284 752 121
Fax: +44 1284 750 560
Printed in Great Britain by DPS, Newmarket, Suffolk
Safety - Read This First
Understanding these instructions
English
The original instructions presented in this operators guide were written in English, and subsequently
translated into other languages. If you are unable to understand these instructions, contact Vinten
Radamec or your distributor to obtain a translation of the original instructions (EU Countries).
БЪЛГАРСКИ
Оригиналните инструкции, представени в настоящото ръководство на производителя, бяха
написани на английски език, а след това - преведени на други езици. Ако не разбирате тези
езици, свържете се с Vinten Radamec или с Вашия дистрибутор, за да получите оригиналните
инструкции (за страните от Европейския съюз).
Česky
Pokyny uvedené v této operátorské příručce byly původně
přelo_eny do ostatních jazyků. Nerozumíte-li těmto pokynům, kontaktujte společnost Vinten Radamec
nebo svého distributora, abyste získali překlad originálních pokynů (členské státy EU).
Danish
De originale instruktioner, der præsenteres i denne betjeningsvejledning, er skrevet på engelsk og
derefter oversat til andre sprog. Hvis du ikke forstår disse instruktioner bedes du kontakte Vinten
Radamec eller vor forhandler for at få en oversættelse af de originale instruktioner (EU-lande).
Deutsch
Die Originalanleitung in diesem Bedienungshandbuch wurde auf Englisch verfasst und anschließend
in andere Sprachen übersetzt. Bei Verständnisproblemen in einer der übersetzten Sprachen
kontaktieren Sie bitte Vinten Radamec oder Ihren Fachhändler; dort erhalten Sie eine Übersetzung
der ursprünglichen Anleitung (EU-Staaten).
Eesti
Käesoleva kasutajajuhendi algtekst on koostatud inglise keeles ning seejärel tõlgitud teistesse
keeltesse. Kui juhend osutub teie jaoks arusaamatuks, võtke juhendi emakeelse tõlke hankimiseks
ühendust Vinten Radameci või kohaliku esindajaga (Euroopa Liidu riigid).
Ελληνικά
Οι αρχικές οδηγίες αυτού του οδηγού για το χειριστή συντάχθηκαν στα Αγγλικά και μεταφράστηκαν στη
συνέχεια σε άλλες γλώσσες. Εάν δυσκολεύεστε να καταλάβετε αυτές τις οδηγίες, επικοινωνήστε με τη
Vinten Radamec ή το
Español
Las instrucciones originales que se indican en esta guía del operador se han redactado en inglés y
posteriormente se han traducido a otros idiomas. Si no entiende estas instrucciones, póngase en
contacto con Vinten Radamec o con su distribuidor para obtener una traducción de las instrucciones
originales (para países de la UE).
Français
Les instructions originales présentées dans ce guide d'utilisation ont été écrites en anglais puis
traduites dans d'autres langues. Si vous ne comprenez pas ces instructions, contactez Vinten
Radamec ou votre revendeur pour obtenir une traduction des instructions originales (pour les pays de
l'UE).
Gaeilge
Scríobhadh na treoracha bunaidh don treoirleabhar oibritheora seo as Béarla, agus aistríodh iad go
teangacha eile ina dhiaidh sin. Mura bhfuil tú in ann na treoracha seo a thuiscint, téigh i dteagmháil le
Vinten Radamec nó le do dháileoir, chun aistriúchán de na treoracha bunaidh a fháil (Tíortha an AE).
Italiano
Le istruzioni originali presentate in questa guida per l'operatore sono in lingua inglese e
successivamente tradotte nelle altre lingue. Qualora le istruzioni non fossero disponibili nella lingua
desiderata, potete contattare Vinten Radamec o il vostro distributore per ricevere la traduzione delle
istruzioni originali (Paesi UE).
διανομέα σας για να λάβετε μια μετάφραση των αρχικών οδηγιών (Χώρες ΕΕ).
napsány anglicky a následně byly
Publication Part No. V4015-4980 Issue 2 3
Latviešu
Šajā operatora rokasgrāmatā iekļautie norādījumi sākotnēji tika sarakstīti angļu valodā un pēc tam
pārtulkoti citās valodās. Ja nesaprotat šos norādījumus svešvalodā, sazinieties ar Vinten Radamec vai
tirgotāju, lai saņemtu norādījumu tulkojumu (kādā no ES dalībvalstu valodām).
Lietuvių
Šiame operatoriaus vadove pristatomos pirminės instrukcijos parašytos anglų kalba ir vėliau išverstos
į kitas kalbas. Jei šių instrukcijų nesuprantate, susisiekite su „Vinten Radamec“ arba savo platintoju ir
gaukite pirminių instrukcijų vertimą (ES šalies kalba).
Magyar
A kezeloi útmutatóban található utasítások angol nyelven íródtak, és utólag fordították azokat más
nyelvekre. Ha nem érti ezen utasításokat, kérjük, vegye fel a kapcsolatot a Vinten Radamecnel vagy
a helyi képviselettel, és igényelje az eredeti utasítások fordítását (EU országok).
Malti
L-istruzzjonijiet originali ippreżentati f'din il-gwida ta' operaturi kienu miktuba bl-Ingliż, u sussegwentement maqluba fl-lingwi ohra. Jekk ma tistax tifhem dawn l-istruzzjonijiet, ikkuntattja lil Vinten Radamec
jew id-distributur tieghek biex tikseb traduzzjoni ta' l-istruzzjonijiet originali (Pajjiżi ta' UE).
Nederlands
De oorspronkelijke instructies in deze bedieningshandleiding zijn geschreven in het Engels en
vervolgens in andere talen vertaald. Als het onmogelijk is deze instructies te begrijpen, neemt u
contact op met Vinten Radamec of met uw distributeur om een vertaling te bemachtigen van de
oorspronkelijke instructies (EG-landen).
Polski
Oryginalne instrukcje zamieszczone w niniejszym podręczniku operatora zostały napisane w języku
angielskim, a następnie przetłumaczone na inne języki. Jeśli nie rozumieją Państwo tych instrukcji,
prosimy skontaktować się z siedzibą lub dystrybutorem Vinten Radamec, aby uzyskać tłumaczenie
oryginalnych instrukcji (kraje UE).
Português
As instruções originais apresentadas no guia do operador foram escritas em Inglês e traduzidas para
outros idiomas. Se não conseguir compreender estas instruções contacte a Vinten Radamec ou o seu
distribuidor para obter a tradução das instruções originais (Países da UE).
Română
Instrucţiunile originale prezentate în acest ghid pentru operatori au fost scrise în limba engleză, şi
traduse ulterior în alte limbi. În cazul în care nu înţelegeţi aceste instrucţiuni, contactaţi Vinten Radamec sau distribuitorul dumneavoastră pentru a obţine o traducere a instrucţiunilor originale (Ţările
UE).
Slovensky
Pôvodné pokyny, uvedené v tomto návode na obsluhu, boli napísané v anglictine a následne
preložené do iných jazykov. Ak nerozumiete týmto pokynom, obrátte sa na spolocnost Vinten
Radamec alebo vášho distribútora, aby vám zaslal preklad originálnych pokynov (krajiny EÚ).
Slovenščina
Originalno besedilo teh navodil za uporabo je bilo napisano v angleščini in prevedeno v ostale jezike.
Če ne razumete teh navodil, se obrnite na podjetje Vinten Radamec ali lokalnega zastopnika, ki vam
bo posredoval originalna navodila (velja za dr_ave EU).
Suomi
Tähän käyttäjän oppaaseen sisältyvät ohjeet on kirjoitettu alun perin englanniksi ja käännetty sitten
muille kielille. Ellet ymmärrä näitä ohjeita, ota yhteyttä Vinten Radameciin tai jälleenmyyjään ja pyydä
alkuperäisten ohjeiden käännöstä (EU-maat).
Svenska
Instruktionerna i denna handbok skrevs ursprungligen på engelska och har sedan översatts till flera
språk. Om du inte förstår dessa instruktioner, kontakta Vinten Radamec eller din återförsäljare för en
ny översättning av originalinstruktionerna (EU-länder).
4 Quattro PDA Operators Guide
Safety guidelines
Warning symbols in this guide
Where there is a risk of personal injury or injury to others, comments appear
highlighted by the word WARNING!—supported by the warning triangle symbol.
Where there is a risk of damage to the product, associated equipment, process or
surroundings, comments appear highlighted by the word CAUTION!
Warning symbols on the product
The following warning symbol may appear on the product.
On encountering the warning
triangle and open book symbols it is
imperative that you consult this
operators guide before using this
product or attempting any
adjustment or repair.
Publication Part No. V4015-4980 Issue 2 5
Important safety instructions
1. Take heed of warnings and instructions
You should read all of the safety instructions
before operating the equipment. Retain this
operators guide for future reference and adhere
to all warnings in the guide or on the
equipment. Do not attempt to operate this
equipment if you do not understand how to
operate it.
2. Usage Statement
Do not use this product for any other purpose
other than that specified in this usage
statement. The Vinten Radamec Quattro PDA
is designed for use in television studios to
configure and calibrate Vinten ‘E’ pan/tilt
heads and the Quattro SE pedestal for use with
studio VR systems. The Quattro PDA is
intended to be used by television camera
operators familiar with the Quattro system.
3. Water, moisture and dust
Protect the product from water, moisture and
dust. The presence of electricity near water can
be dangerous. Do not use the product near
water and take care that liquids are not spilled
onto the equipment. For outdoor applications,
only use products that are specifically designed
for outdoor usage.
4. Climate
The equipment should not be used outside the
operating limits. Refer to the Technical
Specifications for the operating range of the
equipment.
5. Cleaning
We encourage regular cleaning of the product.
• Do not use oil or grease on any exposed part of
the equipment. This is unnecessary and traps dirt
which acts as an abrasive.
• Do not use solvent or oil based cleaners,
abrasives or wire brushes to remove
accumulations of dirt as these damage the
protective surfaces. To clean mechanical
surfaces, use only detergent based cleaners.
• External electrical connection ports should only
be cleaned with a semi-stiff brush or a clean, dry
air supply.
6. Servicing
You should not attempt to service the
equipment. Contact Camera Dynamics Ltd or
your local distributor to arrange servicing.
Maintenance beyond that detailed in this guide
must be performed by competent personnel in
accordance with the procedures in the
Technical or Maintenance Manual for the
equipment.
7. Notes about Robotic equipment
Display prominent warning signs in studios,
alerting personnel that robotic equipment is
present and may move without warning. Ensure
personnel remain a minimum of 1 m (40 inches)
clear of robotic equipment in use.
Operators must familiarise themselves with the
resulting working envelope of robotic products
including all ancillary equipment (lens, zoom
and focus controls, viewfinder, prompter etc.),
to prevent inadvertent collisions.
Only operate robotic products remotely when
you can see them to avoid harm to personnel
and collisions with obstacles and other hazards.
8. Power sources
Only connect the equipment to a power supply
of the type described in the Technical
Specifications or as marked on the equipment.
9. Cables
Always ensure that all power and auxiliary
communications cables are routed so that they
do not present any danger to personnel. Take
care when routing cables in areas where robotic
equipment is in use.
6 Quattro PDA Operators Guide
Certificates and Compliances
The Quattro PDA conforms to the following European Directives:
2004/108/EC (Electromagnetic Compatibility Directive)
2006/95/EC (Low Voltage Directive)
1999/5/EC Radio and Telecommunications Terminal Equipment
This product has been tested and found compliant to the following test standards:
EMC:
IEC 61000-4-2:2001 (1.2)
IEC 61000-4-3:2006 (3rd Edition)
IEC 61000-4-4:2004 (2.4)
IEC 61000-4-5:2001 (1.1)
IEC 61000-4-6:2003 (2nd Edition)
IEC 6100004-8:2001 (1.1)
IEC 61000-4-11:2004 (2nd Edition)
Other certification
FCC:
Class B
IEC 61000-3-2:2005 (3rd Edition)
IEC 61000-3-3:2005 (1.2) &
EN60950-1:2001
EN 55022:1998 & A1:2005 & A2:2003
ETSI EN 300 328 (1.3.1, 2001-12)
ETSI EN 301 489-17 (1.1.1)
ETSI EN 301 489-1 (1.3.1)
Publication Part No. V4015-4980 Issue 2 7
Caring for the environment by recycling
Recycling old electrical and electronic equipment
This symbol on the product or on its packaging indicates that this product must not
be treated as household waste (applicable in the European Union and European
countries with separate collection systems). It shall be handed over to the
applicable collection point for the recycling of electrical and electronic equipment.
Please visit www.vinten.com/recycle for details.
By ensuring this product is disposed of correctly, you will help prevent potentially
negative consequences for the environment and human health, and help conserve
natural resources.
Disposal of waste batteries
Any batteries included with this product must not be treated as household waste (applicable in the
European Union and European countries with separate collection systems). By ensuring these
batteries are disposed of correctly, you will help prevent potentially negative consequences for the
environment and human health, and help conserve natural resources. Please view the section on how
to remove the battery from the product safely using the instructions in the PDA user manual. Hand
the battery over to the applicable collection point for recycling waste batteries. Please visit
www.vinten.com/recycle for details.
8 Quattro PDA Operators Guide
Technical Specification
Dimensions:
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 482 g (1.06 lbs)
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5 cm (6.5 in.)
Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.9 cm (3.5 in.)
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3 cm (1.7 in.)
Power:
Power consumption peak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 W
Power adaptor input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Autoranging 110-240V AC 50/60 Hz
PDA input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-20V DC ±5%
Environmental:
Operating temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -30°C–50°C
Protocols:
Communication facilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RS232
Software:
PDA Operating Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Microsoft Windows Mobile 5.0
Quattro PDA Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.14
Specifications are subject to change without notice.
Publication Part No. V4015-4980 Issue 2 9
Loading...