REVIEWING THE CONTROL BUTTONS
You’ll find 4 control buttons located on the side of the blender motor base:
~ LO turns on the blender at the low speed. This speed should be used for the first
30 seconds of mixing as well as for pouring.
~ HI turns on the blender at the high speed. This speed should be used for the final
stage of mixing. Do not use this speed for pouring.
~ OFF shuts off the machine when either the LO or HI button is in the on position.
~ PULSE is for short pulses of blending on a high speed. This button works only when
you hold it down. When you release the button, the blender will stop automatically.
SOME SMOOTHEE MAKING TIPS
~ You can add ingredients while the blender is operating by removing the small cap
inside of the lid (do not remove the lid while motor is running). Simply drop
ingredients through the opening. Be sure to cut the food into 1-inch piece to fit
through the opening. Replace the small lid cap after you have finished adding
ingredients.
~ Do not place any utensil (scraper, fork, etc.) in the blender jar while blender is
operating.
~ When blending solid foods, such as raw vegetables, cooked or uncooked meats and
fruits always cut them into no larger than 1-inch pieces before placing them into the jar.
Blend no more than 2 cups of these foods at a time. This will speed the blending
process and reduce wear on the blending blades.
~ Always place liquid ingredients in the jar first, unless a recipe specifically states
otherwise.
~ Avoid over-blending. Usually, you will need to blend for a few seconds, not for
minutes. Over-blending may cause food to be mushy.
~ Be sure the motor has completely stopped before removing blender container from the
motor base.
ACACACACACACACACACA 7 CACACACACACACACACACA
&
SOFT FOODS