ViewEra V180, V190T, V180T User Manual

TFT-LCD TV MONITOR

V180/ V180T / V190T Series

USER MANUAL

www.viewera.com

Rev 1.1

MENU ：

1. Introduction

Product Description ………………...............................................................................…

Package Contents……………………...............................................................................…

Product Features…………………………………………………………………………..…
Screen Cleaning Techniques ………………………………………………………….……
Additional …………………………………………………………………………………

2. Control Functions

Front Panel Controls ………………………………………………………………….……
OSD Controls ……………………………………………………..………………………...

3. Input Diagrams

4. Installation ……………………………………………….…………………………….….……

5. Tilting Angles……………………………………………………………………………….……

6. Product Specifications………………………………………………………………………..…

7. Display Modes………………………………………………………………………………..…

8. Troubleshooting…………………………………………………………………………………

9. Service Information…………………………………………………………………………..…

Page 1
Page 1
Page 1
Page 2
Page 3

Page 5
Page 6
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 24

10. Windows Setup…………………………………………………………………………………

11. Remote Control Functions………………………………………………………………….…

Page 25
Page 27

1.Introduction
Product Description

Congratulations on your purchase of the ViewEra 18”/ 19” LCD TV monitor. It incorporates high quality display into a small

light weighted module. It has power-saving capabilities and emits no radiation. You will certainly benefit from this monitor in lots
of ways; to name some of them, comfort safety, and environmental protection.

This LCD monitor incorporates 18”/ 19” color active matrix thin-film-transistor (TFT) liquid crystal display to provide

superior display performance. Its maximum resolution of SXGA 1280 x 1024 is ideal for displaying complex graphics and high
definition images. Its other outstanding capabilities include audio system and OSD (On Screen Display) controls.

Package Contents

Included with your LCD monitor as following items ：

 18”/19” TFT LCD monitor
 15 pin D-sub VGA cable
 RCA audio cable
 Power cord
 AC Adapter
 User manual
 Remote control (Optional）

Page 1

Product Features

 High contrast color TFT LCD display support resolution up to SXGA 1280 x 1024. @75Hz
 Compatible with IBM VGA, IBM SXGA, and Macintosh standards.
 Imbedded audio system provides sound performance.
 AV-In and S-video, TV Tuner（Optional）

 Power management system conforms to VESA DPMS standard.
 Support DDC 1/2B for Plug & Play compatibility.
 Advanced OSD control for picture quality adjustment.
 Detachable stand for wall-mounting application.

Screen cleaning techniques

1. Gently clean the screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth, to remove dust and other

particles that can scratch the screen.

2. Do not apply pressure to the screen surface when wiping it clean..

3. Do not pour or spray any liquid directly onto the screen or casing. Chemical cleaners have been reported to damage the

screen or case of the LCD monitor.

Page 2

Additional

Read all of these instructions and save them for later use.
Follow all warnings and instructions on the product.

 Product

 Do not cover or block the vent holes in the case.
 Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots. They may cause accident fire,

electric shock or failure.

 Disconnect the power plug from the AC outlet if you will not use it for an extended period of time.
 Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage

points or other risks.

 Do not touch the screen directly with your fingers. You may damage the screen, and oil from your skin is difficult to

remove.

 Do not apply pressure to screen. The LCD is very delicate.

 Power

 Use the type of power rating indicated on label.

 Plugs

 Do not remove any of the prongs of the monitor’s three-pronged power plug.
 Disconnect the power plug from the AC outlet under following conditions：

 If you will not use it for an extended period time.
 When the power cord or plug is damaged or frayed.
 If the product does not operate normally when the operating instructions are followed. Adjust only those controls that

are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician.

 If the product exhibits a distinct change in performance, service may be required.

Page 3

 Power and extension cords

 Do not allow anything to rest on the power cord.
 Do not locate this product where persons will walk on the cord.
 Use the proper power cord with correct attachment plug type. If the power source is 120V AC, use a power cord that has

UL and C-UL approvals. If the power source is a 240V AC supply, use the tandem (T blade) type attachment plug with
ground conductor power cord that meets the respective European country’s safety regulations, such as VDE for Germany.

 Do not over load wall outlets or power cords. Ensure that the total of all units plugged into the wall outlet does not exceed

10 amperes.

 Ensure that the total ampere ratings on all units plugged into the extension cord is not above the cord’s rating.
 If the power supply cord, which came with your monitor, is to be connected to the PC instead of the wall outlet, Use an

UL/TUV approved computers with receptacle rated 100~240V AC, 50/60Hz, 1.0A (minimum) only.

 Environment

 Place the monitor on a flat and leveled surface.
 Place the monitor in a well-ventilated place.
 Keep the monitor away from：

 Overly hot, cold or humid places, places directly under sunlight, dusty surroundings, equipment that generate strong

magnetic fields.

 Please adjust the frequency to 75 Hz after setting up the LCD monitor.
 Then push the OSD menu button and use the Auto Adjust function to find the best mode of your computer.

Page 4

3.

Channel Down(

▼

)

2. Control Functions

1. Power switch & Remote sensor

a. Front Panel Controls 【PC, Audio】

6. Menu

7. Source

2. Channel Up(▲); Auto adjusting

4.,(-), 5. (+)

1) Power Switch：Power switch LED & Remote sensor (Optional).

2) Channel Up (▲) & Auto Adjust: On TV mode, it can adjust channel up. On PC mode, it can adjust

signal clock, phase and image position automatically.

3) Channel Down (▼) : On TV mode, it can adjust channel down.

4) “－”: This button is used to decrease the value of selected.

5) “＋”: This button is used to increase the value of selected.

6) Menu: Press this button and the OSD menu pops up on the screen. It can be used to select the OSD control

7) Source: Direct select the input signal PC / AV / S-Video / TV (Only AV / PC model).

options on the screen.

PC AV S-VIDEO TV

Page 5

Monitor Function Selection Menu：

Auto Adjust：Select this function to obtain the best display quality.

Brightness：Adjust the brightness by using ＋/ － button.
Contrast：Adjust the contrast by using ＋/ － buttons.

Clock：Adjust the clock by using ＋/ － buttons.
Phase：Adjust the phase by using ＋/ － buttons.

Horizontal Position：Press ＋/－, the image moves to right/ left ;
Vertical Position：Press ＋/－, the image moves upward/ downward.

Page 6

Tools Menu：.

Volume：Adjust the volume by using ＋/ － buttons

Mute：Turn off speakers
Reset：Recall factory settings

IN INPUT：PC→AV→S-Video→TV function selection

Page 7