ViewEra V151BN User Manual

3.91 Mb
Loading...

TFT-LCD VIDEO MONITOR

TFT-LCD SECURITY MONITOR

USER MANUAL

V151HV/ V172SV/ V191HV Video Series

and V151BN/ V172BN/ V191BN Security Series

www.viewera.com

R3.0

Table of Contents

EMC Compliance …………………..……………………………………………………….……....2

Important Precautions ............................................................................................................

3

1. Introduction

1.1General …………………………………………………………………………………………..4

1.2Features …………………………………………..……………………………………………..4

1.3Package contents .……………………………………………………………………..……….4

2.

Installation

 

 

Connecting the signal cable .............................................................................................

5

 

Connecting the power adapter and power cord ...............................................................

5

 

Connecting the audio cable ..............................................................................................

5

 

Installing the monitor base ...............................................................................................

5

 

Power on ..........................................................................................................................

6

 

Choosing the optimal resolution .......................................................................................

6

3.

User Controls

 

 

Control buttons .................................................................................................................

7

 

OSD menu in VGA mode..................................................................................................

8

 

OSD menu in Video mode...............................................................................................

23

 

Hot key ............................................................................................................................

24

 

Key lock ...........................................................................................................................

24

4.

Dead Pixel Policy ……………………………………………………………………………..25

5.

Warranty & Customer Service ......................................................................................

25

6.

Registration ……………………………………………………………………………………25

7.

Troubleshooting ………………………………..………………………………....................

26

8.

Specifications ………………………………..………………………………........................

27

1

EMC COMPLIANCE

This device has been tested and found to comply with the standards for a class B digital device, pursuant to Part 15 of FCC Rules. Those standards are designed to provide reasonable protection against harmful interference in a residential installation. This device generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, user is encouraged to try to correct the interference by one or more of the following measures:

>Reorient or relocate the receiving antenna

>Increase the separation between the device and receiver

>Plug the device into a wall outlet different from that connected to the receiver.

>Consult the dealer or an experienced technician for help.

CAUTION: any change or modification not expressly illustrated in this manual may void the warranty.

NOTE: any unshielded cable is not allowed to be used in the device.

2

IMPORTANT PRECAUTIONS

1.Before using this device, please read all the instructions in this manual carefully.

2.Please keep the manual carefully for future reference.

3.Unplug this device from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp or wet cloth to clean. Please use LCD screen detergent for cleaning if it is still dirty.

4.Do not use the parts not recommended by the manufacturer, otherwise it may cause a hazard.

5.When unplugging the power cord of the display or adapter, please hold the plug and do not pull the cord directly.

6.Do not place any object on the power cord. Do not trample it either.

7.Do not use the device near water sources, e.g. bathtub, basin, kitchen sink, or washing machine. Do not place the device on a wet floor, or near a swimming pool etc. Do not touch the screen with your fingers or other hard objects.

8.Slots and openings on the housing and its back or bottom are provided for ventilation. To ensure reliable operation of the components and to protect them from overheating, these openings must not be blocked or covered placing the device on a bed, sofa, rug, or other similar surface. The device should never be placed near or over a radiator or heater and should not be placed in a built-in installation unless proper ventilation is provided.

9.Make sure that the device is at least 5 cm distance from the wall or other objects around when it is in use.

10.The power supply must respond to that stated on the rating plate. If you have any query about the

power supply, please refer to the dealer or local power supply provider.

11.As a safeguard measure, the display or adapter is equipped with a power cord with three-terminal plug, the third terminal is grounded. If the plug cannot be inserted into the outlet, please contact an electrical technician for replacing the original outlet while keeping the safeguard measure in effect.

12.Ensure that the power socket and cord in use are able to take the sum of the rated currency of all the products.

13.Do not put the device at the place where user is subject to mal-operation.

14.Observe all the warnings and instructions described in the manual.

15.Do not overload the power outlet or use any extension cord, otherwise it may cause fire or electric shock.

16.Do not attempt to repair this device yourself since opening or removing covers may expose you to dangerous voltage or other hazards. Refer servicing to qualified service personnel.

17.Unplug this display or AC adaptor from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or worn.

b.If the device has been dropped or its housing has been damaged.

c.When the performance of the device deteriorates distinctly.

18.The power cord is the main facility to turn on/off the device; unplug it if the device is not used for a long period of time.

19.Store the device at a place of good ventilation; avoid strong sunlight, high temperature or humidity.

20.Store the device at a place at -20~55 Celsius degree room temperature.

3

Introduction

General

Thank you for purchasing ViewEra’s LCD monitor which incorporates high quality display, multiple video inputs, and power-saving energy management into a light-weighted LCD monitor. The LCD video monitor uses color active matrix thin-film-transistor (TFT) liquid crystal display to provide superior display performance.

Features

TFT LCD panel

Composite video input/ output (for security monitor series), VGA input, and composite audio inputs.

Built-in speakers with volume control.

Comply with VESA DPMS International Power Saving Regulation.

Support DDC 1/2B and Windows PNP Plug & Play.

Advanced OSD controls for picture quality adjustment.

Comply with International Standard VESA 75, which is able to mount the monitor on the wall.

One hot key for image auto adjustment and one hot key for signal source selection.

Package contents

Please make sure the following items are included with your LCD monitor before installation:

LCD monitor

VGA signal cable

Audio cable (3.5 mm audio jack to RCA jack)

Power cord

AC power adapter

User manual

If any of the items is missing, please contact with your dealer at which you purchased the monitor.

4

2. Installation

The monitor is equipped with an automatic sensing AC power adapter for a voltage range from 100 to 240 VAC at a frequency of 50 to 60 Hz. Before connecting the cables, please make sure that the monitor and the computer power are both turned off. Please follow the steps to install your monitor.

a. Security Monitor Rear Panel

b. Video Monitor Rear Panel

2.1 Connecting the signal cable

Plug one end of the VGA cable or video cable to a computer or a video device and the other end to the video signal connector on the monitor, and then tighten the two screws on the cable connector on both ends.

2.2 Connecting the power adapter and power cord

First, connect the AC power adapter to the DC jack on the monitor. Second, connect one end of the power cord to the power adapter and the other end to the electrical outlet

2.3 Connecting the audio cable

Plug one end of the audio cable to audio jack on the computer or a video device and the other end to the audio

jack on the monitor.

2.4Installing the monitor base

Place the monitor base on the monitor stand and align the screw on the monitor base against the screw hole on the monitor stand. Then tighten the screw until the monitor base is securely attached to the monitor stand.

5

2.5Power on

Turn on your monitor and computer. The LED indicator will light green when the screen is under normal condition. If the LED indicator lights amber, please check if the signal cable is securely connected between the computer and the monitor.

2.6Choosing the optimal resolution for computer

1)Double click the Display icon in the Control Panel.

2)Select “Settings”tab from the Display Properties window. You can change the display resolution by using the slider.

3)Select a resolution of 1280 by 1024 for V191 and V172 series, 1024 by 768 for V151 series, and then click

Apply. In the Monitor Settings window, click Yes and then click OK in the Display Properties window.

6

3. User Controls

3.1 Control buttons

(c) (d) (e) (f) (a), (b)

a.) Power button

It is used to turn on or off monitor.

b) Power indicator

When the monitor is under normal working condition, the indicator will light green; if the monitor is under power saving mode or has no signal input, the indicator will light amber. The indicator will turn off under the power off mode. When the power indicator turns off, it means that the monitor is under off mode, but the power adapter is still in charge. For safety, please disconnect the power adapter when the monitor is not in use.

c) “1”button (Menu button)

Enter the OSD main menu and select OSD items.

d) V(Down) Button

Select control items and decrease the values. It is a hot key for Volume, see the section Hot Keys.

e) “^”( UP) Button

Select control items and increase the values. It is a hot key for Volume, see the section Hot Keys.

f) “2”button (AUTO / Exit / Signal Source)

Automatically set the screen display to optimum by pressing and holding the “2”button for 2 seconds at least. The

“2”button can be used to exit the OSD menu by pressing it once. It is a hot key to switch signal sources between

VGA and AV (BNC video in).

7

3.2 OSD menu in VGA mode

Press “1”button to enter the OSD main menu. See the Figure as below. Press “1”then press UP or DOWN to

move the highlight to the desired item and then press “1”button to enter. Press “”or DOWN to adjust the value

^

of selected item and then press “1”button for confirmation.

1)Contrast

a. Press UP or DOWN to move the highlight to Contrast and press “1”to enter.

8

+ 18 hidden pages