Verbatim Store n Go Portable Ekstern Harddisk - 1TB (USB 3.1) Sort, Store n Go Ekstern SSD Harddisk m/Keypad 256GB (USB-C) Manual [EN]
USER MANUAL
Store ‘n’ Go
Secure Portable HDD / SSD
with Keypad Access
180 2
®
EN
Dear user
Thank you for selecting the Verbatim Store ‘n’ Go® Secure Portable HDD / SSD with
Keypad Access as your external data storage device.
For optimal use and performance we advise you to read this manual carefully before using
this product.
Please note: this manual is a general manual which is used for several Verbatim products.
Product pictures shown in this manual may differ from the device you bought.
Contents of the box
Please check the contents of the box. All articles included in this box are listed on the
back side of the packaging.
Need assistance? Have questions?
In case you have a question about the use of this product, need information about
other Verbatim products or need technical assistance, please contact the Verbatim
Service Center for your country. See www.verbatim.com/support for details.
Warning!
All rights reserved. The products named in this manual are only used for
identification purposes and may be trademarks or registered trademarks of the
respective companies. This device was designed for home or office use.
Warning! This device is equipment complying with EN55022 class A. This
equipment can cause radio disturbances in a residential area. If this is the case, the
user has to take appropriate measures and assume all responsibility and costs for.
It may not be used near or with any life-sustaining systems.
Verbatim cannot be made liable for any damages, loss of data or damage following
thereof -whatsoever (including, without limitation, damages for loss of business
profits, business interruption, loss of business information, or other pecuniary loss)
arising out of the use of or inability to use this Verbatim product, even if Verbatim
has been advised of the possibility of such damages.
We reserve the right to upgrade our products in keeping with technological
advances.
2
EN
Table of Contents
General Information ...................................................................................................page 4
Chapter 1
Operating Instruction .................................................................................................page 6
Chapter 2
Quick Operating Guide ..............................................................................................page 7
Chapter 3
Change Password ....................................................................................................page 8
Chapter 4
Erase Disk and set up a New Password ...................................................................page 9
Chapter 5
Initiate and format your Verbatim HDD / SSD ............................................................page 10
Limited War ranty Terms ........................................................................... ...........................page 12
Rights .................................................................................................... ................................page 12
FCC Compliance ...................................................................................... ...........................page 13
WEEE Notice ........................................................................................... .............................page 13
CE Declaration ........................................................................................ .............................page 14
RoHS Complia nce ................................................................................... ............................page 14
3
EN
General Information
Features:
• Supports USB Super-speed (5Gbps) / High-speed (480Mbps) / full-speed (12Mbps)
operation
• Supports Windows 7 / 8 / 10, Mac 9.x, Linux 2.4.x and above
• Supports AES 256-bit Hardware Encryption, seamlessly encrypts all data on the drive
in real-time
• Built-in independent keypad for password input
• LED power / encrypted status indicators
• Simple setup and installation
HDD:
• Support 2.5 inch SATA I/II/III hard disk
• Fits all 2.5 inch hard discs (thickness: 7~9.5mm)
SSD:
• Supports M.2 NGFF SATA I/II/III SSD
• Fits size 22 x 42 mm
Specifications:
• Interfaces: USB 3.1 GEN 1
• Supports USB SuperSpeed (5Gbps) operation
• Case Material: Plastic + Aluminum
• LED Indicator: Power, HDD / SSD activity and encrypted status
Environmental:
HDD:
• Power Requirements: DC5V supplied by the computer
• Operating Temperature: 5 C to 50 C
• Storage Temperature: -40 C to 70 C
• Operating Humidity: 5 to 90%, non-condensing
4
SSD:
• Power Requirements: DC5V supplied by the computer
• Operating Temperature: 5 C to 50 C
• Storage Temperature: -20 C to 70 C
• Operating Humidity: 5 to 90%, non-condensing
System Requirements:
PC:
• Minimum Intel Processor Pentium II/50MHz, 64MB RAM
• Windows 7 / 8 / 10
• Active USB port
MAC:
• Minimum Apple G processor, 64MB RAM
• Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3
• Active USB port
Package Contents:
EN
HDD:
• Store ‘n’ Go® Secure Portable HDD with Keypad Access
• USB-C™ to USB-A Cable (includes USB-A to USB-C™ adapter)
• Quick Installation Guide
• User manual (pre-loaded to the drive)
SSD:
• Store ‘n’ Go® Secure Portable SSD with Keypad Access
• USB-C™ to USB-A Cable (includes USB-A to USB-C™ adapter)
• Quick Installation Guide
• User manual (pre-loaded to the drive)
5
Chapter 1: Operating instruction
Blue LED: Power and data access indicator
Green LED: Unlock and button pressed indicator
Orange LED: Password mode indicator
Red LED: Lock and error indicator
EN
The LED behaviors:
Blue LED: will continuously brighten when the power is on and blinks when in data
access mode.
Green LED: will blink once when the button is pressed and will continuously brighten
when the disc is unlocked.
Orange LED: will continuously brighten when in password mode (creating or changing
password) and turns off when complete.
Red LED: will blink w hen the password or operatio n has been entered incor rectly and
will continuously brighten for lock mode/ turn off after unlock.
6
Chapter 2: Quick Operating Guide
Note
For your own security we highly recommend you change the default password.
Password must be between 5 and 12 digits long.
Warning
After 20 failed password attempts the device will lock and initialise the disc, which will
require re-formatting. Please refer to “Initiate and format your Verbatim HDD / SSD”
section and follow the steps.
EN
1. Connect the Encrypted HDD / SSD to your computer.
2. Enter default password , then press "Unlock" button to confirm it .
(Default password is “00000”)
3. At this time the red LED should remain off and the green LED should be lit.
The HDD / SSD has been unlocked successfully.
4. Open “My Computer” to see your external HDD / SSD is ready to use.
7
Chapter 3: Change Password
EN
1. Press and hold then connect the USB Cable with the drive and your computer until
the red LED and orange LED light up. You now can release the
Enter the existing password (Default password: "00000") and press to confirm.
2.
The orange LED will turn off.
Type your new password and confirm by pressing key .
3.
4. Retype your password set in step 3 and press again until the red LED turns of f.
Your device is now unlocked again.
5.
button.
8
Chapter 4: Erase Disk and set up a New Password
Note
Please back up your data before setting a new password. To the safety of your data,
setting a new password will initialise the drive, to format the drive please follow the
steps revised under “Ready to use".
EN
1. Press and hold key 1 and 2 simultaneously then connect the USB cable with the drive and
your computer. Release both keys as soon as the red LED next to the
Now press for 5 seconds until the orange LED lights up.
2.
Type your new password and confirm by pressing , the orange LED will turn off.
3.
The password was set.
4.
5. Retype your new password set in step 3. And pres , the red LED will turn off.
Your device is now unlocked.
6.
7. With the new password beeing set up, the volume is initialised, to format please follow
the instructions on the next pages.
key lights up.
9
Chapter 5: Initiate and format your Verbatim HDD / SSD
Note
Please be informed that the following processes only apply after creating a new
password as described in chapter 4!
under Windows 7 / 8 / 10
1. Click with the right mouse button on the "My Computer" icon on your desktop.
2. Select the option "Manage".
3. Select the option "Storage" -> "Disk Management".
4. Your systems Disk Management will automatically recognise a drive not being initiated.
5. Choose GPT (GUID PARTITION TABLE) for the partition
style and confirm by clicking on “OK”.
EN
Since the drive needs to be unlocked with every system start, choosing MBR is not recommendable!
6. Choose the hard drive, which is now "unallocated".
7. Click with the right mouse button on the "unallocated" area and select the option "New
Partition". The "New Partition Wizard" opens.
8. The installation wizard will guide you through the formatting process.
9. Tip: The presets of this installation wizard do not necessarily need to be changed. You
may just want to change the drives description and choose for a file system.
10. After the installation process has finished the drive should appear again automatically
showing the assigned drive letter and name.
10
EN
under Mac OSx
1. Once your drive is connected to your Mac and
unlocked, OSx will recognise a not readable disk.
2. Select the button “Initialise…” to start Disk Utility.
3. In Disk Utility you need to select the specific external disk.
Please notice that the Store 'n' Go Secure Portable HDD/ SSD with Keypad Access will lose its original
type description, name and the branding. To avoid false selections it is highly recommendable to
disconnect other external volumes before the next steps. Also make sure not to select any internal
volumes.
4. Select the only external disk available.
5. Chose Erase from the Disk Utility tool bar to
get to the formatting dialog box.
6. In the next dialog box you can assign a
drive name and a file format.
7. Click on “erase” to start the formatting process.
11
EN
Limited Warranty Terms
Verbatim GmbH warrants this product to be free from defects in material and
workmanship for a period of 2 years from date of purchase.
This warranty excludes batteries. If this product is found to be defective within the
warranty period, it will be replaced at no cost to you. You may return it with your original
cash register receipt to the place of purchase or contact Verbatim.
Product replacement is your sole remedy under this warranty, and this warranty does not
apply to normal wear or to damage resulting from abnormal use, misuse, abuse, neglect
or accident, or to any incompatibility or poor performance due to the specific computer
software or hardware used.
VERBATIM WILL NOT BE LIABLE FOR DATA LOSS OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES, HOWEVER CAUSED, FOR BREACH OF
WARRANTIES OR OTHERWISE.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state or country to country.
Note
Verbatim GmbH may at any time revise the content of this user guide without
further notice.
Rights
Copyright © 2011 Verbatim GmbH. No part of this document may be reproduced in any
form or by any means, for any purpose, without the express written permission of Verbatim
GmbH. All rights reserved.
All other brands and product names referenced herein are property of their respective
owners.
12
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
EN
WEEE Notice
The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into
force as European law on 13th February 2003, resulted in a major change in the treatment
of electrical equipment at end-of-life.
The WEEE logo (shown at the left) on the product or on its box
indicates that this product must not be disposed of or dumped with
your other household waste. For more information about electronic
and electrical waste equipment disposal, recovery, and collection
points, please contact your local municipal household waste disposal
service or shop from where you purchased the equipment.
13
CE Declaration
Complied the requirements set out in the Council Directive on the Approximation of the
Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EC) and
Low Voltage Protection 2006/95/EC.
This declaration applies to all specimens manufactured identical to the model submitted
for testing/evaluation.
EN 55032:2012+ AC:2013 (Class B)
EN 61000-3-2:2014
EN 61000-3-3:2013
AS/NZS CISPR 32:2013
EN 55 024:2010
IEC 61000-4-2: 2008
IEC 61000-4-3: 2006+ A1:2007+ A2:2010
IEC 61000-4-4: 2013
IEC 61000-4-5: 2014
IEC 61000-4-6: 2013
IEC 61000-4-8: 2009
IEC 61000-4-11: 2004
EN
RoHS Compliance
This product is in compliance with Directive 2011/65/EU of the European Parliament
and of the Council of 18 December 2006 , on the restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS) and its amendments.
Substances of Very High Concern (SVHC) including 169 substances contained in
Candidate List of June 20th 2016 are not present in this product range above permitted
levels.
14
Loading...