Velleman VMB1TC Datasheet

Overview of the controls for the VMB1TC temperature controller (rev. 4)

2

Location

5

↑

Living

Ma 14:23 21

Mode

←

Menu

→

↓

Direct control

Button Action

Location

Mode

‘↑’ ‘↓’
Menu

Modify sensor or zone.
The previous/next room (zone) can be selected
with the “↑“ or “↓” button as long as the LED of
these buttons blinks.

Temporarily switch between antifreeze -, night

, day or comfort

Remark: a long press will deactivate the
temporary mode (sleep timer)

Display and/or modify desired temperature
Short press: call abridged menu

Long press: call full menu

Menu control

Navigate through the menu with the “↑” and “↓”
buttons.
Select an item with the “→” button.
Confirm a setting with the “→” button or clear the
setting with the “←” button.
Quit the menu at any time without saving the
modifications with the “5” button.

Short menu

Press the “Menu” button shortly to call the menu.

Sleep timer1

Temp. settings

Comfort
Day temp
Night temp
To main menu

Alarm clock set

Clock set

Exit

Extended menu

Hold the “Menu” button pressed to call the extended
menu. Enter the PIN code if necessary.

Program

Sensor Settings

Operating mode
Button lock
Sleep timer
Low temp. alarm
High temp. alarm
Anti-freeze temp
Upper heat temp
Lower cool temp
Upper cool temp
Hysteresis
Temp difference
Unjam pump
Unjam valve
Local program

Zone number2
Diff. sensor2
Sensor cal.
Change name3
To main menu

Configuration

Language
Temp. Read-out
Master clock
Global alarm clk
Battery backup
Change PIN code
Firmware version

Address2
Link wake-up2
Link go-to-bed2
Scan sensors2
To main menu

Display

Contrast
Backlight
To main menu

Statistics2

Min temp 16.0°
Max temp 23.0°

- 0m/5m

0m/5m
8m/1h10m
10m/1h15m
18m/2h35m
To main menu

Exit

Remarks:

1. This menu is only accessible if the temporary mode (sleep timer) is activated.

2. This menu is not accessible if a zone or “all rooms” are selected.

3. This menu is not accessible if “all rooms” are selected.