Product Information
Viewline Hours counter
Description
Gauge to count Engine running hours..
www.vdo.com
Features
Integrated Function LED.
_
Changeable Frontbezels.
_
LED Illumination
_
Flush mount possibility
_
High reliability
_
Concept
Housing PC; flame retarding (UL94)
Bezel PC or ABS; several colors and shapes (see table)
Lens PMMA; double lens
Dial backlit; different colors (see table)
Number wheels white on black (full hours)
red on white (1/10 hours)
Illumination Dial: LED amber (605nm)
Function LED red
Mounting spinlock Nut; locking height 0,5mm – 20mm,
optional Studs and Bracket; locking height 2 – 15mm
Connection 8 pin MQS connector system
Picture: Hours Counter
VDO – A trademark of the Continental Corporation
Viewline Hours Counter
Technical Data
Installation depth 50mm
Operating Voltage 9 – 30 Volt DC
Accuracy +/- 5 Sec / d (at 14V DC, 23°C, NL45)
Current consumption < 30 mA, at 12V (without Illumination)
Operating temperature -40°C to +80°C; plated bezels (chrome) -40°C to +70°C
Storage temperature -40°C to +85°C for 48h; plated bezels (chrome) -40°C to +70°C
Temperature shock in Conformity to IEC 60068 – 2 -14
Climatic test in Conformity to IEC 60068 – 2 -30 Db Variant 2
EMC in conformity with DIN_EN 61000-6-2
DIN_EN 61000-6-3
Standards GL, Category C, F (under preparation)
Vibration in Conformity to IEC 60068 – 2 – 6
and DIN EN 60068 – 2 – 64 in combination with DIN EN 60068 – 2 - 14
Mechanical shock in Conformity to IEC 60068 – 2 – 27
and DIN EN 60068 – 2 – 29
Chemical resistance against - preservative agent
- preservative agent remover
- cold cleaner
- methylated spirit
- interior cleaner
- drinks containing caffeine and tannin
Nominal position NL 0 to NL 90 (DIN16257)
Protection class according to IEC 60529
Front: IP67 (in Nominal position)
Rear: IP52 (in Nominal position)
Reverse polarity protection yes
Over voltage protection yes, max 70 V for 250 ms
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express
authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent,
utility model or design
.
Technische Änderungen vorbehalten 12/09 Technical details subject to change 2 - 3