Vdo VIEWLINE CLOCK User Manual

Viewline Clock

Description

Gauge to indicate Time.

Features

• electrical adjustment.

• Changeable Front bezels.

• LED Illumination

• Flush mount possibility

• High reliability

Product Information

www.vdo.com

Picture: Clock

Concept

Housing PC; flame retarding (UL94)
Bezel PC or ABS; several colors and shapes (see table)
Lens PMMA; double lens
Dial backlit; different colors (see table)
Pointer backlit, white on black dials; red on white dials
Illumination Dial: LED amber (605nm)
Pointer: LED red (632nm)
Mounting spinlock Nut; locking height 0,5mm – 20mm,
optional Studs and Bracket; locking height 2 – 15mm
Connection 8 pin MQS connector system

VDO – A trademark of the Continental Corporation

Viewline Clock

Technical Data

Installation depth 50mm
Operating Voltage 12V System 8 – 16 Volt DC

24V System 18 – 32 Volt DC
Accuracy < +/- 5 Sec / d (at 23°C)
Current consumption < 10 mA, at 12V

< 10 mA, at 24V
Operating temperature -40°C to +85°C; plated bezels (chrome) -40°C to +70°C
Storage temperature -40°C to +90°C for 48h; plated bezels (chrome) -40°C to +70°C
Temperature shock Range -40°C to +85°C; plated bezels (chrome) -40°C to +70°C

Transformation time 10 seconds
Retention time 2h

Climatic test Range +25°C to +55°C
Rel. Humidity 95%

EMC in conformity with DIN_EN 61000-6-3
DIN_EN 61000-6-1
DIN_EN 61000-6-4
DIN_EN 61000-6-2

Standards EN 60945
GL, Category C, F (under preparation)

Vibration Sinus 2g; 10-500Hz; duration 16h
Noise 3g; 10-1000Hz, duration 8h

Mechanical shock continuous 25g; 6ms; 1Hz
Single shock 100g; 11ms
Free fall 1m; 3 times

Chemical resistance against - preservative agent

- preservative agent remover

- cold cleaner

- methylated spirit

- interior cleaner

- drinks containing caffeine and tannin
Nominal position NL 0 to NL 90 (DIN16257)
Protection class according to IEC 60529

Front: IP67 (in Nominal position)
Rear: IP52 (in Nominal position)

Reverse polarity protection yes, 1 minute
No reverse polarity protection for the Set button inputs (Pin 3 and Pin 5)

Over voltage protection 12V System 16 Volt DC for 2h at 60°C
24V System 32 Volt DC for 2h at 60°C

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express
authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent,
utility model or design

.

Technische Änderungen vorbehalten 12/09 Technical details subject to change 2 - 3