Vanguard TUNGSTEN Data Sheet

Product Specifications

TUNGSTEN SERIES

Outdoor P3.9 • Durable & Rugged LED Cabinet

Overview

Vanguard’s Tungsten cabinet available in P3.9,
features edge corner protectors and raised
modules to provide protection the lamps. Tungsten
is the durable cabinet that the display industry has
been waiting for as it can withstand the rigors of
any environment. The cabinet is front or rear
serviceable and has a die-cast aluminum frame.
The power supply module can easily be swapped as
a single unit by detaching 4 clips, pulling the PSU
and replacing it with a new one. LED modules can
be quickly removed using a glass suction cup tool
and replaced with a new module. The 8 point
integral locking system enables quick assembly as
well as precise alignment. The internal side locks
allow for curvature up to 5 degrees concave or
convex. Aluminum module covers improve flatness
uniformity which allows for the protective resin
encasement to be as flat and uniform as possible.
Aluminum module covers also improve heat
dissipation over traditional modules. This product
is suitable for simulation structures for military,
maritime, and aviation applications.

Additional Features

• Fine pixel pitch outdoor cabinet allows for
higher resolution images to be displayed
regardless of environment.

• Fold-over edge protectors for keeping
cabinet corners protected during set-up and
tear down.

• Aluminum modules provide greater flatness
uniformity for improved resin flatness and
uniformity.

• Aluminum modules provide improved heat
dissipation.

• Curvable 5 degrees concave or convex.

• Low Power Consumption.

• 14+-bit gray scale.

• Removable PSU and data housing.

• No internal ribbon cables.

• Superb color & brightness uniformity.

• Refresh rate minimum of 2880Hz

• Contrast Ratio: 3000:1

__________________________________________________________________________________________

Vanguard LED Displays · 4190 Waring Rd., Lakeland, FL 33811 · [phone] · www.vanguardleddisplays.com

LED

LED Type SMD1R1G1B

LED Configuration 3 in one

Pixel Density 160,000/m²

Module Size 9.84” x 9.84”

Module Resolution 64 x 64

Modules Per Cabinet 4

Lifetime to Half Brightness (L50) 100,000

Contrast Ratio 3,000:1

Brightness 4500-5000Nits

Viewing Angle 140°

Tungsten Outdoor P3.9

CABINET

Cabinet Material Die Cast Aluminum

Cabinet Size 19.8” x 19.8”

Cabinet Resolution 128 x 128

Min. Viewing Distance 13 ft.

Modules Per Cabinet 4

Cabinet Weight 19.1lbs.

Service Access Front or Rear

IP Rating IP30

Specifications

INTERNAL OPERATION

Driving Method 1/15th Scanning

Gray Scale 14bit

IC Driver Chipone 2053

Refresh Rate >2880Hz

Frame Frequency 60Hz

AC POWER

Source Voltage 100-240V, 50/60Hz

Max Power Consumption 200W

Avg. Power Consumption 100W

ENVIRONMENTAL

Operating Temperature -10°C to +50°C

Storage Temperature -20°C to +60°C

Operating Humidity 20% to 90% RH

__________________________________________________________________________________________

Vanguard LED Displays · 4190 Waring Rd., Lakeland, FL 33811 · [phone] · www.vanguardleddisplays.com