Vaisala RG13, RG13H Technical data

Vaisala Rain Gauge RG13, RG13H
www.vaisala.com
Features/Benefits
Designed to measure rainfall
and precipitation in remote and unattended locations
Provides accurate
measurements with long term performance
Requires no regular
maintenance
Economical and proven in
operation
The Vaisala Rain Gauge RG13, RG13H uses a tipping-bucket mechanism to produce a contact closure every time it receives a predetermined small quantity of rainfall (0.2 mm).
The body and funnel of the gauge are of aluminium alloy. An accurately machined septum-ring at the top gives an aperture of exactly 400 cm The tipping-bucket mechanism is mounted inside the body on a cast aluminium-alloy base equipped with xing slots, three levelling screws and a spirit level.
The mechanism consists of a divided bucket pivoted at its centre. Rain collects in the upper half. When this is full, the mechanism tilts and discharges the collected water, allowing the other half of the bucket to begin lling.
2
A siphon device is tted to the base of the funnel to control the rate of ow into the buckets. By ensuring a constant ow rate into the tipping bucket, calibration is made easier and accuracy improved. The alternate lling and discharging continue as long as rain is falling, and at each tilt, a magnet momentarily closes the
.
contacts of a reed switch.
In the rain gauge of type RG13H, a heater element is provided inside the body in order to melt snow. The heater switches on at temperatures below +4 °C.
Technical Data
Diameter of aperture 225 mm Area of aperture 400 cm Rainfall capacity unlimited Sensitivity (rainfall per pulse) 0.2 mm
Dimensions
Height 390 mm Diameter 300 mm
Weight 2.5 kg
Operating temp. range -40 ... +60 °C Heating connection/disconnection at +4 °C Heating power 40 W (1 A / 40 VDC) Accuracy 1 % (at 25 mm/h) Resolution 0.2 mm
(also 0.1 mm and 0.5 mm
available)
2
For more information, visit www.vaisala.com or contact us at sales@vaisala.com
Ref. B010195EN-D ©Vaisala 2010
This material is subject to copyright protection, with all copyrights retained by Vaisala and its individual partners. All rights reserved. Any logos and/or product names are trademarks of Vaisala or its individual partners. The reproduction, transfer, distribution or storage of information contained in this brochure in any form without the prior written consent of Vaisala is strictly prohibited. All specifications — technical included — are subject to change without notice.
Loading...