PTB220TS Barometer Case and Battery
Vaisala’s digital PTB220 Barometers are well
suited for portable applications. They can
be transported by normal surface and
airmail, and the BAROCAP
maintains its accuracy even under rough
conditions.
With the PTB220TS, barometers can be
converted into portable units to be used as
traveling and transfer standards. The
PTB220TS kit includes an oak case, a sealed
lead acid battery, and recharging electronics. The PTB220 Barometer can be installed
in the case at the factory.
®
Pressure Sensor
The oak case consists of an outer case that
protects the barometer and an inner case in
which the barometer is mounted. An
integral valve keeps the pressure port
closed during transport and open for
measurement. The sealed lead acid battery
is good for 12 hours of continuous use. It is
normally recharged overnight, but it can
also be recharged with a car battery.
The case can be ordered separately for
installation with the customer’s existing
PTB220 Barometer. The barometer must
have the following features:
• 1, 2, or 3 pressure transducers
• class A accuracy
• local display
• RS232/485 serial interface
The oak case consists of an outer case that
protects the barometer and an inner case in
which the barometer is mounted. An
integral valve keeps the pressure port
closed during transport and open for
measurement. The sealed lead acid battery
is good for 12 hours of continuous use. It is
normally recharged overnight, but it can
also be recharged with a car battery.
PRODUCT PTB220TS PTB220CASE
Order specification Ordered together with a PTB220 Ordered separately, if the customer
Barometer, which is installed in already has a compatible PTB220
the case at the factory Barometer
Includes • Case, battery, and recharging electronics
• Power cord for recharging from car cigarette lighter socket
• DC plug for a local mains adaptor cord
• Pressure connectors: for 1/8" tubing and a 5 mm connector
TECHNICAL DATA PTB220TS BAROMETER CASE AND BATTERY
ELECTRONICS
Supply voltage 10...25 VDC
Current consumption50 mA in battery operation
(display backlight on)
300 mA/10 V, 130 mA/25 V
(recharging, battery empty)
100 mA/10 V, 40 mA/25 V
(battery full)
Communication interfaces
RS232 full-/half-duplex
RS485 half-duplex
Connectors 9-pin female sub D-connector
6-pin 5-mm screw-terminal bus
Battery
Type NP0.8-12 (12 V/800 mAh)
Manufacturer YUASA
Operating time 12 hours continuous use
(display backlight on)
Recharging time 12 hours (typical)
Fuse 1 A
ACCESSORIES
17371 AC adapter for 230 VAC with EURO plug
Housing
Size (W x H x D)25 cm x 24 cm x 22 cm
Weight 7 kg (including the barometer)
Complies with EMC standard EN61326-1:1997 +
Am1:1998; Generic Environment.
BAROCAP® is a registered trademark of Vaisala Oyj.
Specifications subject to change without prior notice.
© Vaisala Oyj
Vaisala Oyj
P.O.Box 26
FIN-00421 Helsinki Phone: (+358 9) 89 491 http://www.vaisala.com
FINLAND Telefax: (+358 9) 8949 2485 industrialsales@vaisala.com
Ref. B210247en 2001-11