PTB110 Barometer for Industrial Use
www.vaisala.com
The Vaisala BAROCAP® Barometer PTB110 offers outstanding long-term stability.
Features/Benefits
Vaisala BAROCAP® sensor
▪
Several pressure ranges
▪
Accuracy ±0.3 hPa at +20 °C
▪
Long-term stability
▪
On/o control with external
▪
trigger
Output voltage 0 ... 2.5 or
▪
0 ... 5 VDC
Current consumption less than
▪
4 mA
Mountable on a (35 mm wide)
▪
DIN rail
NIST traceable (certificate
▪
included)
PTB110
The Vaisala BAROCAP® Barometer
PTB110 is designed both for accurate
barometric pressure measurements
at a room temperature and for
general environmental pressure
monitoring over a wide temperature
range.
Vaisala BAROCAP®
technology
The PTB110 barometer uses the
Vaisala BAROCAP
capacitive absolute pressure sensor
developed by Vaisala for barometric
pressure measurement applications.
The sensor combines the outstanding
elasticity characteristics and
mechanical stability of single- crystal
silicon with the proven capacitive
detection principle.
®
Sensor, a silicon
Accuracy and stability
The excellent long-term stability of
the barometer minimizes or even
removes the need for eld adjustment
in many applications.
Applications
The PTB110 is suitable for a variety of
applications, such as environmental
pressure monitoring, data buoys,
laser interferometers, and in
agriculture and hydrology.
The compact PTB110 is especially
ideal for data logger applications as it
has low power consumption. Also an
external On/Off control is available.
This is practical when the supply of
electricity is limited.
Technical data
13.40
0.53
68.40
2.69
90
3.54
4
0.16
76.20
3.00
3.50
0.14
Ø7.20
0.28
15.82
0.62
97.3
3.83
28.1
1.11
Operating range (1 hPa=1mbar)
Pressure ranges 500 ... 1100 hPa
600 ... 1100 hPa
800 ... 1100 hPa
800 ... 1060 hPa
600 ... 1060 hPa
Temperature range -40 ... +60 °C (-40 ... +140 °F)
Humidity range non-condensing
General
Supply voltage 10 ... 30 VDC
Suppply voltage control with TTL level trigger
Supply voltage sensitivity negligible
Current consumption less than 4 mA
in shutdown mode less than 1 µA
Output voltage 0 ... 2.5 VDC
Output frequency 500 ... 1100 Hz
Resolution 0.1 hPa
Load resistance minimum 10 kohm
Load capacitance maximum 47 nF
Settling time 1 s to reach full accuracy after power-up
Response time 500 ms to reach full accuracy
after a pressure step
Acceleration sensitivity negligible
Pressure connector M5 (10-32) internal thread
Pressure fitting barbed fitting for 1/8"
Minimum pressure limit 0 hPa abs
Maximum pressure limit 2000 hPa abs
Electrical connector removable connector for
5 wires (AWG 28 ... 16)
Terminals Pin 1: external triggering
Pin 2: signal ground
Pin 3: supply ground
Pin 4: supply voltage
Pin 5: signal output
Housing material, plastic cover ABS/PC blend
Housing classification IP32
Metal mounting plate Al
Weight 90 g
Electromagnetic compatibility Complies with EMC standard
measurement, control and laboratory use - EMC
requirements - for use in industrial locations
EN 61326-1, Electrical equipment for
0 ... 5 VDC
Accuracy
Linearity* ±0.25 hPa
Hysteresis* ±0.03 hPa
Repeatability* ±0.03 hPa
Calibration uncertainty** ±0.15 hPa
Accuracy at +20 °C*** ±0.3 hPa
* Defined as ±2 standard deviation limits of end-point
non-linearity, hysteresis error or repeatability error.
** Defined as ±2 standard deviation limits of inaccuracy of the
working standard including traceability to NIST.
*** Defined as the root sum of the squares (RSS) of end-point
non-linearity, hysteresis error, repeatability error and
calibration uncertainty at room temperature.
TOTAL ACCURACY AT
+15 ... +25 °C (+59 ... +77 °F) ±0.3 hPa
0 ... +40 °C (+32 ... +104 °F) ±0.6 hPa
-20 ... +45 °C (-4 ... +113 °F) ±1.0 hPa
-40 ... +60 °C (-40 ... +140 °F) ±1.5 hPa
Long-term stability ±0.1 hPa/year
Dimensions
Dimensions in mm (inches)
BAROCAP® is a registered trademark of Vaisala.
For more information, visit
www.vaisala.com or contact
us at sales@vaisala.com
Ref. B210681EN-B ©Vaisala 2009
This material is subject to copyright protection, with all
copyrights retained by Vaisala and its individual partners. All
rights reserved. Any logos and/or product names are trademarks
of Vaisala or its individual partners. The reproduction, transfer,
distribution or storage of information contained in this brochure
in any form without the prior written consent of Vaisala is strictly
prohibited. All specifications — technical included — are subject
to change without notice.