Vaillant VA 10-035 MXNHI, VA 10-025 MXNHI, VA 6-035 MXNHI, VA 6-025 MXNHI, VA 10-020 MXNHI User Manual
...
VA 6-020 MXNHI
VA 6-025 MXNHI
VA 6-035 MXNHI
VA 10-020 MXNHI
VA 10-025 MXNHI
VA 10-035 MXNHI
DE, EN, ES, HR, IT, NL, TR
EN
2
Contents
Split Murales User Manual
Contents
1 Your Safety
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
1.1 Symbols used
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
1.2 Proper Use of the Unit
. . . . . . . . . . . . . . . . . . . . . . .
3
. . . . . . . . . . . . . .
3
3 Identification of the Unit
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
7.1 General Safety Considerations during Use
. . . . . .
7
7.2 Identification of Functions
. . . . . . . . . . . . . . . . . . . .
7
7.2.1
. . . . . . . . . . . . . . . . . . .
7
7.2.2 Display Indicators
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3 Advice on how to use the Remote Controller
. . . .
7.3.1 Remote Controller Lock
. . . . . . . . . . . . . . . . . . . . . .
7.4 Connection/Disconnection of the Unit
. . . . . . . . . .
7.5 Selection of the Operation Mode
. . . . . . . . . . . . . .
7.5.1 Automatic Mode (AUTO)
. . . . . . . . . . . . . . . . . . . . . .
7.5.2 Cooling Mode (COOL)
. . . . . . . . . . . . . . . . . . . . . . . .
7.5.3 Dehumidifying Mode (DRY)
. . . . . . . . . . . . . . . . . .
7.5.4 Fan Mode (FAN)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.5.5 Heating Mode (HEAT)
. . . . . . . . . . . . . . . . . . . . . . . .
7.6 Setting the Airflow Direction
. . . . . . . . . . . . . . . . . .
1
3
7.6.1 Vertical Airflow
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
4
7.6.2 Horizontal Airflow
. . . . . . . . . . . . . . . . . . . . . . . . . .
1
4
7.7 Special Function Selection
. . . . . . . . . . . . . . . . . . . .
7.7.1 Ionizer Operation (HEALTH)
. . . . . . . . . . . . . . . . . .
7.7.2 Ionized Airflow Operation (HEALTH FLOW)
. . . . .
7.7.3 SLEEP Function
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
7.7.4 TIMER ON/OFF Function (CONNECTION/
. . . . . . . . . . . . . . .
1
7
7.8 Emergency Operation and Operation Test
. . . . .
7.8.1 Emergency Operation
. . . . . . . . . . . . . . . . . . . . . . .
7.8.2 Operation Test
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.8.3 Cancellation Emergency Operation/
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
. . . . . . . . . . . . .
19
Advice for saving Energy
. . . . . . . . . . . . . . . . .
19
. . . . . . . . . . . . . . .
19
. . . . . . . . . . . . .
19
. . . . . .
19
. . . . . . . . . . .
19
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
. . . . . . . . . . . . . . . . . . . . . . . . . . .
19
. . . . . . . . . . . . .
19
. . . . . . . . . .
19
10
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . .
11 Maintenance
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
11.1 Cleaning the Indoor Unit
. . . . . . . . . . . . . . . . . . . . .
2
1
11.2 Cleaning the Air Filters
. . . . . . . . . . . . . . . . . . . . . . .
11.3 Cleaning the Outdoor Unit
. . . . . . . . . . . . . . . . . . . .
12 Storage over a prolonged Period
. . . . . . . . . .
13 Product Decommissioning
. . . . . . . . . . . . . . .
3
Split Murales User Manual
EN
1.1 Symbols used
Danger!
Danger!
Warning!
1.2 Proper Use of the Unit
This unit has been designed and manufactured for acclimatisation
the unit's installation manual and in the user manual.
the unit.
Your Safety 1
Extreme Operating Conditions 2
Outdoor
43ºC D.B.
10ºC D.B.
18ºC D.B.
18ºC D.B.
27
ºC D.B.
24ºC D.B.
-15ºC D.B.
OOLING
HEATING
ºC D.B.
vent R-410A into atmosphere: R-410A, is a fluorinated
greenhouse gas, covered by Kyoto Protocol,
with a Global Warming Potential (GWP) = 1975
The refrigerant fluid contained in this
equipment must
destruction before the final disposal of the equipment.
of the refrigerant fluid must have the necessary
certification issued by local authorities.
4
Split Murales User Manual
3 Identification of the Unit
to know the specific model of your unit please refer to
the unit nameplates.
1 Indoor Unit
2 Outdoor unit
3 Remote controller
4 Connections and channels
3 Identification of the Unit
4 Declaration of Conformity
5 Description of the Unit
Split Murales User Manual
EN
TECHNICAL
The equipment is reversible. It allows cooling or heating the rooms as desired.
fresh atmosphere. This filter's exposure to sunlight regenerates its anti-odour capacity.
This protects the outdoor unit's faucets from bad weather.
This prevents the freezing of the outdoor unit during the winter months.
Table 5.1 Technical Specifications.
Description of the Unit 5
Split Murales User Manual
Fitting the remote controller batteries.
1 Battery lid
2 Batteries
the batteries are correctly inserted.
Note!
Note!
Warning!
disposing of the batteries properly.
The “AM” or “PM” indicators start to flash on the
When pressing the HOUR buttons, the time
If the HOUR buttons are kept pressed, the time will
The “AM” or “PM” indicators will stop flashing and the
1 CLOCK button
2 HOUR button (increase/decrease)
3 SET button
6 Initial Settings
7
Split Murales User Manual
EN
Danger of injury and physical damage!
conditioning unit.
with allergies to specific chemical
extreme temperatures in the room. This
could be a health hazard.
the air inlets and outlets, or between the unit
Danger of injury and physical damage!
the equipment airflow. Do not use sprays or
other flammable gases near the air
equipment. This could cause a fire.
from the mains immediately and contact the
distributor in order to proceed properly. If
you continue to use the unit under these
cause short circuiting or fire.
oxygen deficiency.
Warning!
1 ON/OFF button
2 TEMP button (TEMPERATURE)
3 FAN button
4 HEALTH AIRFLOW button (IONIZED AIRFLOW)
7 SET button (SETTING)
9
10 LIGHT button,
t
the display in the
11 RESET button
12 TIMER button
13 CLOCK button
14 SLEEP button (NIGHTTIME FUNCTION)
15 MODE button
16 HOUR button
17 HEALTH button (IONIZER)
18 FRESH button (FRESH AIR) [This button is not available for
these models
19 CODE Button (THIS UNIT SHOULD BE SET TO CODE A)
Operating Instructions 7
Split Murales User Manual
1 TIMER indicator
2 FAN SPEED indicator
3 LOCK indicator
4 SWING UP/DOWN indicator (AIRFLOW DIRECTION UP/DOWN)
SLEEP indicator (NIGHTTIME FUNCTION)
7 CODE indicator
9 AIR FLOW LEFT/RIGHT indicator
10 TEMP indicator (TEMPERATURE)
11 TIMER OFF indicator (DISCONNECTION USING TIMER)
12 CLOCK indicator
The rest of the buttons are deactivated.
The rest of the buttons are activated.
The lock status indicator disappears.
Note!
correctly, press the RESET button with a sharp
object to reset the remote controller.
Connection/Disconnection of the Unit
The liquid crystal display (LCD) will show the latest
7 Operating Instructions
Split Murales User Manual
EN
temperature.
1 MODE button
2 AUTO mode indicator
The different operation modes are displayed.
AUTO
COOL
Note!
the grates horizontally.
1 MODE button
2 COOL mode indicator
3 TEMP button (increase/decrease)
4 FAN button
The different operation modes are displayed.
AUTO
COOL
Operating Instructions 7
10
Split Murales User Manual
When keeping the TEMP buttons pressed, the
temperature configuration will increase or decrease
Each time the FAN button is pressed, the fan speed
When the fan is configured in AUTO mode, the air
Note!
conditions of considerable air humidity can
cause drops of water to fall on the outlet grate.
1 MODE button
2 DRY mode indicator
3 TEMP button (increase/decrease)
4 FAN button
The different operation modes are displayed.
AUTO
COOL
7 Operating Instructions
11
Split Murales User Manual
EN
1
When keeping the TEMP buttons pressed, the
temperature configuration will increase or decrease
Each time the FAN button is pressed, the fan speed
temperature exceeds the configured one by 2ºC, the unit
the fan configuration, see Figure 7.11.
1
Configured temperature
Note!
outlet grate.
the SLEEP function are disabled.
1 MODE button
2 FAN mode indicator
3 FAN button
The different operation modes are displayed.
AUTO
COOL
Operating Instructions 7
12
Split Murales User Manual
Each time the FAN button is pressed, the fan speed
1 MODE button
2 HEAT mode indicator
3 TEMP button (increase/decrease)
4 FAN button
The different operation modes are displayed.
AUTO
COOL
When pressing the TEMP buttons, the temperature
When keeping the TEMP buttons pressed, the
7 Operating Instructions
13
Split Murales User Manual
EN
Each time the FAN button is pressed, the fan speed
Note!
function for the prevention of cold currents.
Note!
cooling mode is activated for a prolonged
Note!
the grates vertically.
Danger of injury and physical damage!
Avoid direct body contact with the powerful
directly to the airflow. They could suffer
damage.
Warning!
Note!
the settings required with the remote controller.
Note!
the grates vertically.
Note!
the grates horizontally.
Operating Instructions 7
14
Split Murales User Manual
The vertical slat will be directed in accordance with
the positions allowed for each operation mode.
On the remote controller or the control panel of the
Permitted positions: 1, 2, 3, 4, 6
Permitted positions: 1, 2, 3, 4, 5, 6
Permitted positions: 1, 2, 3, 4, 5, 6
Vertical Direction
Table 7.1 Vertical direction positions.
The horizontal deflectors are directed in accordance
On the remote controller or the control panel of the
7.2.
Table 7.2 Horizontal direction positions.
Note!
will memorise the configured direction position,
operation.
7 Operating Instructions
15
Split Murales User Manual
EN
1 HEALTH button
2 HEALTH function indicator
The ioniser process indicator light will light up on the
viewing panel and the ionised air function will start.
The ionising process indicator light on the viewing
Note!
the indoor unit fan does not function even if the
1 HEALTH FLOW button
2 HEALTH FLOW function indicator
The horizontal flow indicator will appear on the
The unit's bottom inlet and outlet grates will close and
the airflow will circulate horizontally from the top inlet
vertically.
The vertical flow indicator will appear on the display.
The unit's top inlet and outlet grates will close and the
Operating Instructions 7
16
Split Murales User Manual
Both the inlet and outlet grates will remain open
Note!
After configuring the ioniser function, the inlet
the real conditions.
Note!
the outlet grate.
1 SLEEP button
2 SLEEP function indicator
the configured one to ensure that the temperature does
the ambient temperature will rise 1ºC above the
1ºC more.
7 Operating Instructions
17
Split Murales User Manual
EN
T
Configured temperature
t
Start of the SLEEP function
the configured one to ensure that the temperature does
the ambient temperature will drop 2ºC below the
2ºC more.
Configured temperature
t
Start of the SLEEP function
1 TIMER button
2 TIMER ON/OFF function indicator
3 HOUR buttons (increase/decrease)
4 SET button
The display configuration of the remote controller will
Each time it is pressed, the timer modality will change
The "ON"/"OFF" indicators will light.
TIMER OFF
TIMER O
N
TIMER ON-OF
Operating Instructions 7
18
Split Murales User Manual
time:
When pressing the HOUR buttons, the time
If the HOUR buttons are kept pressed, the time will
The time can be set within an interval of 24 hours.
The “ON” or “OFF” indicators will stop flashing.
Time display: the unit starts to operate or stops after x
Note!
timer.
Note!
the batteries or after a possible power failure.
Note!
the TIMER ON/OFF function the next time,
the operation modes, Cooling or Heating depending on
the ambient temperature, see Table 7.3.
Temperature
Temp.
Timer Mode
Airflow
23ºC
26ºC
23ºC
23ºC
Tab. 7.3 Emergency Operation.
A beeping noise is heard which indicates that the
1
Note!
the temperature is less than 16ºC.
A beep is heard twice which indicates the start of the
After 30 minutes the function test will end
The beeping stops.
The unit returns to normal operating mode.
7 Operating Instructions
19
Split Murales User Manual
EN
.
1
2
Displays the set temperature for a few seconds, then returns to
3 TIMER ON
TIMER OFF
Advice for saving Energy
to comply with the legal standard. Each degree above
this value significantly increases the energetic
the main room.
Ambient Temperature when absent
than the normal temperature. A reduction which exceeds
these 5º C does not provide any further energy savings
the event of prolonged absences, e.g. during holidays.
to the surfaces which delimit this area, i.e. the walls,
taking into account the use being made of each room
temperature to be modified automatically in relation to
the predetermined values (in heating mode the
temperature decreases slightly; in cooling mode the
temperature increases slightly) during nighttime hours.
to programme the operation of your unit to make it
that your unit is correctly serviced (for more details
the filters are kept clean and that the air inlets and
Indicators of the indoor unit 8
Advice for saving Energy 9
20
Split Murales User Manual
Troubleshooting
their possible causes and solutions, see Table 9.1.
The system does not work at all (the
ventilation does not start)
The selector is set to "O" (stop)
The thermostat is set to an excessively high
temperature in Cooling mode or excessively
The operating time does not coincide with
the timer setting
The remote controller batteries have run out
The fuse has blown
for each model. Do not use wire or other
The thermostat is set to an excessively high
temperature in cooling mode or excessively
The ambient temperature has not reached
the designated level
The operating mode (COOL/HEAT) is not
selected
The air inlet or outlet on the indoor or
The compressor protection has been
stops to avoid excessive cooling.
The LCD on the remote controller is blurred
The remote controller batteries have run out
The remote controller has problems during
the operation of the unit
Table 9.1 Troubleshooting.
10 Troubleshooting
21
Split Murales User Manual
EN
Danger!
Danger!
Warning!
cleaning the unit.
11.1 Cleaning the Indoor Unit
11.2 Cleaning the Air Filters
vacuum cleaner or cleaning them with cold water.
Warning!
attach perfume systems, anti-odour
the unit's outlet point and ensure they only run
when the fan is on.
11.3 Cleaning the Outdoor Unit
Danger of injury and physical damage!
A damaged or deteriorated base could make the
damage.
Danger of injury and physical damage!
dismantle the outdoor unit outlet.
Note!
conditioner specialist or the Vaillant Official
the life of your equipment and improve its
Maintenance 11
22
Split Murales User Manual
time:
Clean the air filters.
Check that the thermal magnetic switch is connected.
Danger of injury and physical damage!
equipment is properly installed by personnel
with the appropriate qualifications (see manual
for installer). Otherwise water leakage,
could be caused.
Danger of injury and physical damage!
tools and protection resources.
qualified, technically competent individuals.
Warning!
disposing of the unit. To avoid this, follow the
taken into account during the disposal:
that is authorised by the local authorities to transport
the distributor of the new unit for waste management
12 Storage over a prolonged Period
13 Product Decommissioning
Loading...