ClearVIEW HD-USB PTZ Conferencing Camera ............................................................................................................................................... 6
Diagram: Rear View Connectors with Feature Call-outs: ............................................................................................................................. 6
Diagram: Front View with Feature Call-outs: ................................................................................................................................................ 7
Connecting the Extension Devices to the Camera ................................................................................................................................................. 8
Diagram: Connection Detail with the Power Extension Module and the Active USB 2.0 Extension Cable .................................................. 9
Diagram: Connection Detail with Local Power to the Camera and the Active USB 2.0 Extension Cable ..................................................... 9
Reference Diagram: Basic Connectivity Example ...................................................................................................................................... 10
Reference Diagram: Connectivity Example 2 with Audio: ........................................................................................................................... 10
Reference Diagram: H.264 Streaming Connectivity (for Release 2.0 when IP Streaming is enabled): ...................................................... 11
Reference Diagram: Connection Diagram Example using A CDN (for release 2.0 when IP is enabled): .................................................. 11
First Time Set-up with the ClearVIEW HD-USB PTZ Camera .............................................................................................................................. 11
Getting Started ................................................................................................................................................................................................. 12
Table: Switch Setting Label on Bottom of the HD-USB Camera: ............................................................................................................... 12
Step by Step Instructions to install the WallVIEW HD-USB SR Camera System ................................................................................................. 13
Keyboard Hot Keys for PTZ functions: ............................................................................................................................................................. 15
Internal Web Pages and Control: .......................................................................................................................................................................... 16
Static IP Set-up: ................................................................................................................................................................................................ 17
Connecting the Camera to the Program of Choice: .............................................................................................................................................. 26
Skype Example ............................................................................................................................................................................................ 26
VLC Media Player Example ......................................................................................................................................................................... 27
Technical Specifications:
Compliance and CE Declaration of Conformity: ClearVIEW HD-USB PTZ Camera ........................................................................................... 28
Appendix 2 - Telnet Serial Command API ............................................................................................................................................................ 34
Telnet Command List ....................................................................................................................................................................................... 34
WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 3 of 40
prop
WallVIEW HD-USB SR Camera System
O
VERVIEW
:
Based on the remarkable Vaddio ClearVIEW HD-USB PTZ
Conferencing Camera, the WallVIEW HD-USB SR (SR stands
for short range) system includes the features that are expected
out of a WallVIEW branded product. The ClearVIEW HD-USB is
the world’s first broadcast-quality HD PTZ camera with USB 2.0
UVC (Universal Video Class) video output, IP streaming, internal
web pages for control and HD analog component (YPbPr)
outputs built right into the camera. Simply plug the HD-USB
camera directly into your PC and there is no need for a separate
capture cards or other devices to make it work. The ClearVIEW
HD-USB uses standard USB 2.0 UVC drivers, which means that
no special USB drivers, applications or associated headaches
are required. As a result, the HD-USB camera works seamlessly
with any software application running on any OS that supports
USB 2.0 video class or IP devices. All this, and the ClearVIEW
HD-USB PTZ cameras are made in the USA too.
The ClearVIEW HD-USB combines impressive performance with
an equally impressive feature set. The HD-USB camera is a
plug and play PTZ camera for Unified Communications soft client
conferencing systems such as Skype®, WebEx® Jabber® and
WallVIEW HD-USB SR System with CONCEAL Mount
Lync® that offers a totally vast improvement over the
“inexpensive webcam” systems available today.
The HD-USB is a HD conferencing camera suitable for the small, medium or even the largest conferencing space
available. The HD zoom lens allows HD-USB to capture a wide angle of view (58.1° wide end) to view everyone
at a conference room table, as well as capture an individual from a long distance (3.2° tele end) in a larger room.
The motorized, multi-element, glass zoom lens offers 19X optical zoom and is built around a 1/3-Type Sony®
Exmor progressive scan, high-speed, low noise CMOS image sensor with a total of 1.3 Megapixels for precise
and vibrant HD color video images. The HD-USB achieves improved picture quality even in low light
environments requiring a minimum illumination rated at an astonishingly low 0.7 LUX (F1.6 - 50IRE).
Like the ClearVIEW HD-USB PTZ Camera, the ClearVIEW HD-USB will support USB 2.0 (UVC) and IP (H.264)
video streaming (with Firmware Release 2.0.x). The Ethernet network interface provides for both IP control (with
built-in web pages) and IP streaming. IP Streaming will support either RTSP or HLS streaming protocols. The
software is easily upgradeable in the field over the Ethernet port.
The WallVIEW HD-USB SR system includes the HD-USB camera, the CONCEAL camera mount, an active portpowered 20m (65.6168’) USB 2.0 extension cable, the Vaddio Power Extension Module for extending power over
Cat-5 cable to the camera and all the USB 2.0 cables, power supplies and mounting hardware that are required
to install the WallVIEW HD-USB SR system.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Use only the power supplies provided with the system. Use of any unauthorized
power supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connec tions or shorts,
which can result in the RS-232 control line failing and locking up, and/or compromising the
HSDS™ signals. For best results please use standard RJ-45 con nectors and test all cables for
er pin-outs prior to use and connection to Vaddio product.
WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 4 of 40
WallVIEW HD-USB SR Camera System
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the
one provided or outdoor operation has not been tested and could damage the device and/or create a potentially
unsafe operating condition.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
U
NPACKING
North American Version 999-6994-000
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:
One (1) ClearVIEW HD-USB PTZ Camera (998-6990-000)
One (1) Vaddio IR Remote Commander
One (1) EZCamera™ Control Adapter (RJ-45 to DB-9)
One (1) Vaddio PowerRite™ 12 VDC, 3.0 Amp Power Supply
One (1) AC Cord Set for North America
One (1) 10’ (3.05m) USB 2.0 Type A (Male) to USB B (Male) Cable
One (1) 1’ (305mm) USB 2.0 Type A (Male) to USB B (Male) Cable
One (1) 20m (65’) Active, Port Powered USB 2.0 Extension Cable
One (1) Power Extension Module
One (1) 24 VDC, 2.08 Amp PowerRite™ Switching Power Supply
One (1) AC Cord Set for North America
One (1) CONCEAL Mount and Hardware for the HD-USB Camera
Documentation
International Version 999-6994-001
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:
One (1) ClearVIEW HD-USB PTZ Camera (998-6990-000)
One (1) Vaddio IR Remote Commander
One (1) EZCamera™ Control Adapter (RJ-45 to DB-9)
One (1) Vaddio PowerRite™ 12 VDC, 3.0 Amp Power Supply
One (1) Euro Power Cord
One (1) UK Power Cord
One (1) 10’ (3.05m) USB 2.0 Type A (Male) to USB B (Male) Cable
One (1) 1’ (305mm) USB 2.0 Type A (Male) to USB B (Male) Cable
One (1) 20m (65’) Active, Port Powered USB 2.0 Extension Cable
One (1) Power Extension Module
One (1) 24 VDC, 2.08 Amp PowerRite™ Switching Power Supply
One (1) Euro Power Cord
One (1) UK Power Cord
One (1) CONCEAL Mount and Hardware for the HD-USB Camera
Documentation
Broadcast Truck
Not Included
WallVIEW HD-USB SR Cam
era System, Document Number 342-0465 Rev. D Page 5 of 40
WallVIEW HD-USB SR Camera System
ClearVIEW HD-USB PTZ Conferencing Camera
Diagram: Rear View Connectors with Feature Call-outs:
④
③
②
①
⑤
⑥
Note: Use the
EZ POWER VIDEO
port with the Power
Extension Module
⑨
⑧
⑩
⑪
⑫
⑬
⑦
Connectors and Functions:
1) 12 VDC Input: Power input on EIAJ-04 connector for local power.
2) HD Video Select: A rotary switch that allows the user to choose the component HD output video resolution
and format. All USB 2.0 UVC resolutions are derived from 720p/59.94. The USB 2.0 processor can accept
rotary positions 0 through 6. Please see the sections on available resolutions and concurrent resolutions
when using USB 2.0 and analog component outputs.
3) Camera Settings (Dip Switch Settings): Settings for IR remote frequency, baud rate, SD output format, and
image flip, test bars can be configured on these switches.
4) RS-232 IN & IR Out: The upper RS-232 Port is not implemented on the HD-USB Camera. Use the RS-232
Port on the lower card ONLY.
5) YPbPr Output: Component HD video is fed through the DE-15 connector (HD-15 for the shell sized
challenged). YPbPr and Composite signals are simultaneous. Note: This is an HD camera and the SD
signals are down converted and are really not the sweet spot of this camera. This is a courtesy feature only.
WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 6 of 40
WallVIEW HD-USB SR Camera System
Connectors and Functions (continued)
6) Composite Video (CVBS) Output: The CVBS output feeds out SD video signals and is configurable with
the dip switches to choose between 480i/NTSC or 576i/PAL in 4:3 formats. Squeeze and letterbox modes
are also available (see dip switches).
7) EZ POWER VIDEO Port: Use the RJ-45 EZ POWER VIDEO port with the Power Extension Module. The
Power Extension Module sends DC power over pins 1 & 2 to power the HD-USB camera for up to 150’
(45.72m). In the Case of the WallVIEW HD-USB SR system, the limitation is the USB 2.0 Extension Cable,
which extends USB 2.0 only 65’ (20m).
8) 5 VDC Output: The 5 VDC output is on an EIAJ-03 connector was added to supply power to the active
Extreme USB Extender transmitter side. The receiver side is powered by the computer’s USB port.
9) USB 2.0 Connector: The USB 2.0 is on a type-B Female and attaches to a PC running a soft-client video
conferencing system or video capture software that uses UVC (USB Video Class) standard drivers. No other
drivers are required to plug the HD-USB into a computer and have it work. The UVC drivers will auto
negotiate the top resolution that the PC and HD-USB Camera can share together and auto-implement it.
NOTE: Do not use USB 1.1 cable with the HD-USB Cable because it won’t work.
10) Settings Rotary Switch: The Settings rotary switch is essentially for future applications. Leave this switch
on position “0” for normal operation. Position “C” is used for a reset to factory defaults. To reset the camera
and erase all the stored internal data, place this switch on “C” and power cycle the camera. Move the switch
to “0” again for normal operation.
11) Ethernet 10/100 Port (H.264 Streaming Active with Firmware Release 2.0.x): The network port has
green and yellow LEDs that indicate ready and usage states. The port allows for access to the internal web
pages for camera set-up and control (nice). The network port will stream (unicast) H.264 video (from CIF up
to and including 1080p/30). IP Streaming supports RTSP and HLS formats.
12) RS-232 Port: The RS-232 Port allows external control systems to engage a rudimentary API. Basic
functions include pan, tilt zoom, on/off etc. The functions on the Vaddio IR Remote Commander are mirrored
in the API. Most control is expected to come from the internal web page via Ethernet or Telnet.
13) Permanent USB Resource Slot Card: The lower row of connectors and the brains of the HD-USB Camera
are located on this permanent slot card. The card is not removable and is not compatible with any other
Vaddio camera. Please do not try to remove this card at any time.
ClearVIEW HD-USB PTZ Conferencing Camera
Diagram: Front View with Feature Call-outs:
1) Zoom Lens and Image Sensor: The 19X optical zoom lens is
built around a 1/3-Type, high-speed, progressive scan CMOS
image sensor with a total of 1.3 Megapixels for precise HD video
image acquisition.
2) Blue Power Light: A Vaddio blue power light is illuminated
when the camera is turned on.
3) IR Sensors: IR sensors are built into the front of the HD-USB to receive IR signals from the IR remote
control supplied with the camera.
4) Red Tally Light: T
Camera
he red tally light is not used with the HD-USB
➊
➌
➍
WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 7 of 40
➋
WallVIEW HD-USB SR Camera System
C
ONNECTING THE EXTENSION DEVICES TO THE CAMERA
The following diagrams pertain to the connectivity of the WallVIEW HD-USB SR Camera System with the
CONCEAL Mount, Power Extension Module and 20m (65.6’) Active USB Extension Cable
Diagram: Basic Connectivity Example:
WallVIEW HD-USB with
CONCEAL Mount
To EZ POWER VIDEO RJ-45 Port
USB 2.0 Distance Limit with the Active
Extension Cable = 20m (65.6’)
CAT-5 Cable - 24 VDC Power
(Pin 1: +, Pin 2: -)
24 VDC, 2.75A
Power Supply
Power Extension
Module
Provided
*
M to F
Active USB
2.0 Extension
Type-A Male
USB 2.0 Video using
USB Video Class
(UVC) Drivers
Cable
*
to Type-A
Female
M
Host PC with Conferencing Application
1’ (305mm)
USB 2.0 Cable
Type-B Male to
Type-A Male
Diagram: Basic Connectivity Example:
This example uses the HD-USB PTZ Camera and Vaddio’s EasyUSB Mixer/Amp, two (2) Echo Cancelling
EasyMic™ MicPODs, Power Extension Module, Active USB 2.0 Extension Cable and Two (2) Bose Ceiling
Speakers to create a complete room system.
WallVIEW HD-USB with
CONCEAL Mount
PC Video Monitor - HD
Large Screen Format
Bose FS-16F Ceiling Speakers
Optimized for Voice
To EZ POWER
VIDEO RJ-45 Port
Distance Limit
20m (65.6’)
1’ (305mm)
USB 2.0
Cable
*
Type-B Male
to Type-A
Male
65.6’ Active
USB 2.0
Extension Cable
*
Type-A Male to
Type-A Female
USB 2.0 Video using
USB Video Class
(UVC) Drivers
PC HD
Video
USB 2.0 Cable
USB 2.0 Audio using
USB Audio Class
(UAC) Drivers
M
Host Tower PC with
UC Application
8 Ohm
Speaker
Cable
EasyUSB
Mixer/AMP
Cat-5e
Cable
Cat-5e
Cable
CAT-5 Cable - 24 VDC Power
(Pin 1: +, Pin 2: -)
Power Extension
Module
24 VDC, 2.75A
Power Supply
WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 8 of 40
Two (2) EasyMic MicPODs with
three (3) integrated mic elements
and three (3) Acoustic Echo
Cancellers per mic
8 Ohm
Speaker
Cable
WallVIEW HD-USB SR Camera System
Diagram: Connection Detail with the Power Extension Module and the Active USB 2.0 Extension Cable
The 24VDC connection from the Power Extension Module to the camera can provide adequate power up to 150’
(45.7m) away. The 65.6’ (20m) long USB extension cable limits the overall distance the camera and computer
can be separated.
HD-USB PTZ Camera
Rear View
Power Extension
Module
1’ (305mm)
USB 2.0
Type-B Male
to Type-A
Cable
*
Male
M
F
65.6’ (20m) Active USB 2.0 Extension Cable
Type-A Male to Type-A Female
CAT-5 Cable - 24 VDC Power
(Pin 1: +, Pin 2: -)
The 24VDC connection from the
Power Extension Module will
power the camera up to 150’
(45.7m) away.
DC Power
24 VDC, 2.75A
Power Supply
M
Modern Computer &
French Bulldog
(Not Included)
Diagram: Connection Detail with Local Power to the Camera and the Active USB 2.0 Extension Cable
In this example the camera is powered by the provided 12 VDC, 3.0 Amp power supply.
Local Power
PC Video Monitor - HD
Large Screen Format
Host Tower PC with
UC Application
Provided
12 VDC Power
Supply
1’ (305mm)
USB 2.0 Cable
M
F
65.6’ (20m) Active USB 2.0 Extension Cable
Type-A Male to Type-A Female
PC HD
Video
USB 2.0
Connector
M
Warp Plasma
Conduit Not
Included
WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 9 of 40
WallVIEW HD-USB SR Camera System
R
EFERENCE DIAGRAMS
Reference Diagram: Basic Connectivity Example
HD-USB Camera and a Soft-client videoconferencing system (audio is not included in this example).
HD-USB
Conferencing
Camera
USB 2.0
Port
USB 2.0 using only
UVC Drivers
USB 2.0
Port
PC with Host Application
Reference Diagram: Connectivity Example 2 with Audio:
This example uses the HD-USB PTZ Camera and Vaddio’s EasyUSB™ Mixer/Amp, two (2) Echo Cancelling
EasyMic™ MicPODs and Two (2) Bose Ceiling Speakers to create a complete room system using programs such
as Skype®, Jabber®, Google+®, Microsoft Lync® and others. This configuration features driverless USB 2.0
Video and Acoustic Echo Cancelled (AEC) Audio.
PC Video Monitor - HD
Large Screen Format
Bose FS-16F Ceiling Speakers
Optimized for Voice
ClearVIEW HD-USB
Conferencing
Camera
USB 2.0 Cable
USB 2.0 Video using
USB Video Class
(UVC) Drivers
PC HD
Video
USB 2.0 Cable
USB 2.0 Audio using
USB Audio Class
(UAC) Drivers
8 Ohm
Speaker
Cable
EasyUSB™
Mixer/AMP
Cat-5e
Cable
8 Ohm
Speaker
Cable
Cat-5e
Cable
Tower PC with Host
Application
Two (2) EasyMic MicPODs with
three (3) integrated mic elements
and three (3) Acoustic Echo
Cancellers per mic
WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 10 of 40
WallVIEW HD-USB SR Camera System
Reference Diagram: H.264 Streaming Connectivity (for Release 2.0 when IP Streaming is enabled):
The HD-USB Camera has a Unicast streaming output suitable for up to six (6) concurrent users (at lower
resolutions). This configuration shows four (4) concurrent users.
HD-USB PTZ CAMERA
H.264 STREAMING
VIDEO
Network
LAN/WAN
Internet
Reference Diagram: Connection Diagram Example using A CDN (for release 2.0 when IP is enabled):
For a Large Number of Viewer s - Use a CDN Content D istribution Netwo rk such as WOWZA, Amazon or iCloud
and more…
F
IRST TIME SET-UP WITH THE CLEAR
VIEW HD-USB PTZ C
AMERA
The ClearVIEW HD-USB PTZ Camera was designed to be exceptionally easy to use and operate. There is
documentation at the back of the manual for pin-outs. These pin-outs are also available, along with application
TechNotes, from the Vaddio website www.vaddio.com.
WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 11 of 40
WallVIEW HD-USB SR Camera System
Getting Started
Step 1: Using the HD Video Select Rotary Switch and Camera Settings Dip Switch on the back of the camera, s et up
the camera’s output resolution and functional preferences. A reference label is on the bottom of the camera.
HD-USB
Rear Panel
HD Video
Select Switch
Camera Settings 10-Pos Dip Switches
Settings Rotary Switch
Leave on “0”
Table: Switch Setting Label on Bottom of the HD-USB Camera:
IR 1
1 & 2 UP
IR 2ONIR 3
ON
1234
21
DIP SWITCH SETTINGS
IR
OUT
OFF
ON
3768109
SD
9600
NTSC
bps
38400
bps
4
6 & 7 UP
SD
SD
SQ
PAL
567910
5
SD 4:3
SD
LB
IMAGE
FLIP
OFF
ONON
8
TEST
BARS
OFF
HD VIDEO AND USB 2.0 SELECT
720p/59.94 - USB
10
OFF
ON
0
1080i/59.94
1
1080p/59.94
2
1080p/60
3
720p/50
4
1080i/50
5
1080p/50
6
480i/29.97
7
USE ROTARY SETTINGS 0 through 6 FOR USB 2.0 OUT
8
9
A
B
C
D
E
F
576i/25
1080p/30
1080p/25
Step 2: For the best USB 2.0 video, set the HD VIDEO SELECT switch to “0” (720p/59.94) on the HD-USB
Camera. All resolutions are derived from 720p. The USB 2.0 processor can accept rotary positions 0 through 6,
but please be aware that if 1080p/60 is scaled down to 320 x 180, well…the image will look much better if the PC
scales from 720p than 1080p (see note below).
Please Note: When using 1080p as the input, very low USB 2.0 resolutions such as 352 x 240
and 320 x 180 will either not look so good, won’t work or the user may wish they didn’t work due
to how far the signal is scaled/smashed down by the PC from the original input. Please use 720p
or position “0” for the lower resolutions. Always start from a HD resolution closest to what the UC
client wants to send and display.
For concurrent USB 2.0 and Analog Component (YPbPr), switch settings 0 through 6 are the resolutions that
can be both digital (USB 2.0 or H.264) and Analog (YPbPr). These resolutions are the most used resolutions
for HD video in both HD videoconferencing and broadcast.
For Analog (YPbPr) output, all of the HD VIDEO SELECT switch settings will operate.
The Composite output on the BNC connector is independent from the USB 2.0 / IP resolutions. The SD
settings on the BNC and are formatted by dip switches 5, 6 and 7.
Step 3: Choose the IR frequency (1, 2 or 3) on the camera for use with the IR Remote Commander. Since only
one USB camera can be plugged into a PC at a time, recommended default is Freq. 1 (dip switches 1 & 2 up).
WallVIEW HD-USB SR Camera System, Document Number 342-0465 Rev. D Page 12 of 40
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.