Vaddio HD7V User Manual

Installation and User Guide

Camera and Electronic Products for Integrators

Vaddio™ Thin Profile Wall Mount for ClearVIEW HD-18 PTZ Camera

Part Number: 535-2000-230

Rounded corners for safety
and ease of handling

Durable black powder
coat finish (paintable
to match any décor)

¼”-20 mounting
screw attaches
camera to mount

Thin Profile Wall Mount
Heavy duty 12-gauge metal
construction

UNPACKING:

Carefully remove the product and all of the parts from the packaging.
Unpack and identify the following parts:

 One (1) Thin Profile Mount for Vaddio HD-18 PTZ Camera (camera not included)
 Two (2) ¼”-20 x ½” Mounting Screws
 Four (4) #8 x 1.25” Sheet Metal Screws
 Four (4) Wall Anchors, Self Drilling

MOUNTING THE CAMERA:

The Thin Profile Wall Mount for the Vaddio HD-18 Camera can be mounted to a 2-gang wall electrical wall box or be mounted directly to a
drywall surface with the supplied wall anchors or other spiral type wall anchors of the Integrator’s choice. The slotted mounting holes are 90º
opposed from top to bottom to ensure that the camera can be adjusted and mounted level. Note: When locating the camera, consider
viewing angles, lighting conditions, possible line of site obstructions and check for in-wall obstructions where the camera is to be mounted.
Pick a mounting location to optimize the performance of the camera.

INTENDED USE:

This Thin Profile Wall Mount was designed, built and tested for use indoors and to support the weight, size and shape of the Vaddio HD-18
Camera only. Using this mount for any other device could damage that device and/or create a potentially unsafe operating condition.

HARDWARE WARRANTY:

Please see the Vaddio website at http://www.vaddio.com for the Vaddio Statement of Warranty for all Vaddio Products. The Statement of
Warranty covers the policies and procedures of the Hardware Warranty, Exclusions, Customer Service, Technical Support, Return Material
Authorizations (RMA), Voided Warranty, Shipping and Handling and Products Not Under Warranty. The Vaddio Warranty Statement
supercedes all other published warranty statements in content and coverages. Vaddio Technical Support can be contacted through the
Vaddio website or through e-mail support at mailto:[e-mail]

.

Mounts to a 2-gang
electrical box or directly to
drywall with wall anchors

90º Opposed slotted
mounting holes for
easy camera leveling

©2009 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change
without notice. Vaddio is a registered trademark of Vaddio. All other trademarks are property of their respective owners. Toll Free: 800-572-2011,
Main: 763-971-4400, FAX: [phone]. Document Number 341-884 RevA