Urschel® Model CC
Versatile Slicer, Shredder, & Granulator
SPECIFICATIONS
Measurements and weights may vary depending on machine configuration.
Length.. . . . . . . . . . . . 48.03" (1220 mm) - 2 or 5 HP
. . . . . . . . . . . . . . . . . . . 51.74" (1314 mm) - 10 HP Width.. . . . . . . . . . . . . . . . . . . . . . . 35.26" (896 mm) Height. . . . . . . . . . . . . . 31.47" (799 mm) - 2 or 5 HP
. . . . . . . . . . . . . . . . . . . . 30.28" (769 mm) - 10 HP Net Weight.. . . . . . . . . . . 550 lb (250 kg) - 2 or 5 HP
. . . . . . . . . . . . . . . . . . . . . 680 lb (310 kg) - 10 HP Motor.. . . . . . . . . 2, 5, or 10 HP (1.5, 3.7, or 7.5 kW)
TYPES OF CUTS
grating optionS
Grating Heads offer cuts including powdered parmesan, coarse granules, and a variety of shreds.
FULL SHREDS & REDUCED V SHREDS
Full Shred: Diamond-shaped cross section available in three thicknesses: .070, .097, or
.125" (1.8, 2.5, or 3.2 mm).
Reduced V Shred: “V”-shaped cross section
OVAL SHREDS
Oval Shred: Oval-shaped cross section approximately .125" (3.2 mm) thick by .250" (6.4 mm) wide.
Wide Oval Shred: measures .125" (3.2 mm) thick by .375" (9.5 mm) wide.
crescent shredS
Crescent Shred: Crescent-shaped cross section.
Wide Crescent Shred: Wide crescent-shaped cross section
NEW!
APPLICATIONS
The Urschel §Model CC uniformly slices, strip cuts, shreds and granulates a wide variety of food products at high production capabilities with excellent results. Among these products are potatoes for chips, shredded cheese for pizza topping, raw mushrooms, cabbage, lettuce, onions and carrots for salad ingredients, and a wide variety of nut meats for bakery ingredients. The versatile machine features interchangeable cutting heads that enable the processor to change the type of cut in just minutes. Specially designed knives do not require sharpening and are inexpensive to replace. The Model CC features continuous operation for uninterrupted production and simplified design for easy cleanup and maintenance. The Model CC will accept products measuring up to 4" (101.6 mm) in any dimension.
OPERATING PRINCIPLE
Product enters the rotating impeller [ 1 ] and is held against the inner surfaceofthecuttingheadassemblybycentrifugalforce.Thecuttinghead assembly consists of eight individual stationary cutting stations. Slices or shreds are produced as product passes each knife[ 2 ] in a smooth and uninterrupted manner. Length is controlled by input product size.
|
1 |
2 |
NEW! |
|
|
MODEL CC |
|
FULL & REDUCED Flat-V® ShredS
Full Flat-V Shred: Hexagonal-shaped cross section measuring approximately .150" (3.8 mm) on all sides.
Reduced Flat-V Shred: Flattened top and bottom that form a corrugated shred.
Strip cuts
Rectangular cross section.
Widths: 3/32, 1/8, 3/16, 1/4, 3/8, 1/2, 9/16, and 3/4" (2.4, 3.2, 4.8, 6.4, 9.5, 12.7, 14.3, and 19 mm)
flat sliceS
Slice thickness up to .500" (12.7 mm)
V SliceS
Slice thickness up to .100" (2.5 mm)
.125" Slice: 8 complete “V’s” per inch. The depth of each “V” is .050"
(1.3 mm); Centers: .125" (3.2 mm).
.212" Slice: 4.7 “V’s” per inch. The depth of each “V” is .084" (2.1 mm); Centers: .212" (5.4 mm).
standard crinkle slice
Slice thickness up to .285" (7.2 mm) with 3-1/2 waves per inch. The depth of each crinkle is .080" (2 mm).
Centers: .300" (7.6 mm).
* FLAT-V® Slice
Slice thickness up to .180" (4.6 mm) with
2.1 corrugations per inch. The depth of each
corrugation is .125" (3.2 mm). Centers: .473" (12 mm).
*Not available in some European countries for exclusivity reasons. Contact your local Urschel office to verify availability.
(over)
Loading...