Page 1
DATASHEET
PC Client
Blackbody
Thermal Camera
Bi-spectral Infrared Temperature Fast Screening Instrument
USS-TIC500
Introduction
The dual-view infrared USS-TIC-500 series dual-spectrum infrared temperature rapid screening camera is mainly developed based on the
principle of infrared thermal radiation. It uses a non-refrigerated core and low signal-noise image processing technology. It is a non-contact,
real-time, continuous and accurate Temperature measuring equipment. At the same time, a dedicated software system can be used to visually
display the temperature information of the temperature measurement objects. It can be used for entry-exit health quarantine at customs,
airports, stations, terminals, land ports, and epidemic prevention in key places such as schools, hospitals, office buildings Control scenes are
widely used.
Key Features
Thermal imaging functions
Resolution 384 × 288, high sensitivity detector
Highest temperature cross cursor positioning
Support point, line and rectangle temperature measurement modes
Support temperature abnormal alarm function
Support automatic capture of moving face targets
Support wearing a mask to identify the face area to avoid false alarms from non-face high temperature objects
Page 2
DATASHEET
Model
USS-TIC500
Thermal Camera
Sensor type
Uncooled detector
Max. Resolution
384 × 288
Response band
7.5 ~ 14μm
Pixel pitch
17μm
Optical Transmission Calibration
Manual / Automatic
NETD (Noise Equivalent Temperature
Difference)
<50mk (@ 25 ° C, F # = 1.0)
Lens focal length
6.5mm
Aperture
F1.0
Field of View
50.8 ° × 37.1 °
Palette
Hot white, black hot, iron red, etc.
Image and Video
Thermal Image / Video / Visible Light Picture
.jpg (including full temperature data) / Full Temperature Infrared Video / .jpg Visible
Light Picture
Visible light camera parameters
Sensor type
5MP (2592*1944), 1 / 4 inch Progressive scanning CMOS image sensor(resolution
limited to 1024*768)
Focal length/Zoom
2.7mm/No optical zoom
Maximum aperture
2.8
Auto exposure control
support
Automatic white balance
support
Minimum illumination
0.5Lux
Signal to noise ratio
34dB
Resolution
Main stream: limited to 1024x768, in order to keep coaxial with thermal imaging
Secondary stream: N/A
Third stream: N/A
Protocol
TCP / IP, UDP
Compatible access
SDK
Temperature measurement function
Visible light phase functions
Support automatic exposure control and automatic white balance
Support face temperature measurement mode, intelligently analyze face targets and measure temperature, support multiple alarm
linkages
Dual light temperature measurement linkage, can draw regular and superimposed temperature measurement information on visible
light image
Specifications
Page 3
DATASHEET
Temperature measurement range
+28℃~+42℃
Temperature measurement accuracy
≤ 0.4℃ (without blackbody), ≤ 0.3℃ (with blackbody)
Detection distance (person)
Recommended temperature measurement distance is 2-2.5m
Temperature measurement accuracy
Under the rated working environment conditions, ± 0.4 ° C (without black body) ±
0.3 ° C (with black body)
Temperature measurement area setting
Support global highest temperature tracking, point, line, rectangle temperature
measurement mode
Over temperature alarm function
Support temperature abnormal alarm function, area alarm text, alarm voice prompt
Intelligent features
Support automatic capture of moving face targets
Face area recognition
Support wearing a mask to identify the face area to avoid false alarms from non-face
high temperature objects
General specifications
Power input
DC12V
Power
<5 W
POE power supply
N/A
Size (mm)
232mmx120mm × 96mm
Weight
≤1Kg
Protection class
IP65
Working temperature and humidity
+10 ° C ～+ 30 ° C, <90% RH
Dimensions
Unit: mm
Loading...