Owner’s Manual
URC TRF-GT1
LED Lighting
URC TRF-GT1 LED Lighting Owner's Manual © 2014 Universal Remote Control, Inc.
The information in this Owner’s Manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from
Universal Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this Owner’s Manual may be subject to change without prior notice.
URC - Control the Experience is a registered trademark of Universal Remote Control, Inc.
ccGEN2 is a registered trademark of Universal Remote Control, Inc.
Total Control is a registered trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
ii
Programmable Only by URC Professional Installers
To fully integrate your URC LED lighting with your Total Contol/ccGEN2 system, the installer must have detailed knowledge of each
component, LAN configuration, Wi-Fi optimization, the URC product, its accompanying software and how the system is connected and
operated.
URC software is available ONLY to a trained and certified professional audio/video installer. Although technical assistance is available, it
is offered to our certified professional installers who can install a URC controller in a timely and efficient manner.
About URC
For 25 years URC has been setting the higher standard for control technology with
continuous research and development. Headquartered in Harrison, N.Y., the
company has been the leading supplier of high quality remotes and is broadly
regarded as the leading control manufacturer by consumers, subscription
broadcast providers, retailers, custom installation professionals and OEM partners.
• Celebrating 25 years as the leading supplier of universal remote controls
• More than 100 million remotes supplied in the past 10 years alone
• Solutions that span every control market, from subscription broadcast to
complete home and commercial automation
If
yo
Email:
t
o
MA
U
u
In
c
C
In
Ser
R
are
o
n
t
staller’
on
stallation
C
C
T
Co
t
Need H
in
n
e
e
d
of
ac
t
yo
u
r
U
s Name:
tact In
ial #:
Address (if
f
o:
D
____________________________
e
c
h
Su
ppo
n
t
ac
t
u
s
by
Toll Free: 1-800-801-0900
e
c
h
su
ppo
el
p?
assist
an
c
e
,
ple
R
C
Profe
ssio
n
_____________________
_
_______________________
ate:
____________________
an
y):
________________
rt
is
also
t
h
e
re
ph
o
n
e
o
r
e
m
rt@u
n
iv
e
rsalre
al
ase
fo
ail
m
In
be
su
re
st
alle
r.
r
yo
u
.
at
:
o
t
e
.c
o
m
• Consistently ranked the #1 brand in custom remote and whole-house control
markets
Our mission across all of our products and markets is to be the best provider of integrated control solutions that make life better and
easier for our customers worldwide.
Subscribe to Automated Living with URC
Our e-publication brings you the latest in home automation, technology and control solutions. See inspiring
featured homes, have a chance to win prizes and interact with URC staff.
Sign up today at www.universalremote.com and get your free issue now. See link at bottom of the webpage.
iii
Chapter 1: URC LED Lighting Overview
Introducing URC LED Lighting 1
Expanding your System 2
Product Descriptions 3
User Settable Scenes 4
Specifications 4
Chapter 2: Warranty and EULA
Limited Warranty Statement 5
End User Agreement 7
Federal Communication Commission Interference Statement 8
Chapter 1: URC LED Lighting Overview
Introducing URC LED Lighting
Thank you for purchasing URC’s LED Lighting TRF-GT1 Gateway. This LED lighting option integrates with your ccGEN2™ or Total Control
home automation system, giving you control of your lights from anywhere inside or outside of your home. The TRF-GT1 connects
wirelessly to control your URC LED lighting, sold separately.
• Control energy-saving LED light bulbs
Save green while going green with high-efficiency LED light bulbs. LED lights significantly drive your electricity costs down, saving
you money year after year.
• Configure Lighting Levels in Scenes
Adjust lighting levels for each individual bulb in a scene.
• Compatible with URC’s ccGEN2 and Total Control product lines
Know when your lights are ON, OFF or dim levels directly from any URC interface or smartphone/tablet. The TRF-GT1 gateway
provides your system with feedback that is displayed on your user interface.
Chapter 1: URC LED Lighting Overview 1
Expanding your System
In conjunction with the TRF-GT1 gateway, you can incorporate URC LED Lighting as well as other URC products to expand control and
add “interactivity” in your home. Just a few of the many options are listed below.
URC LED Lighting
Easily integrate URC LED Lighting
throughout your home and
simultaneously control dimming levels
and power. (Gateway requires optional
URC LED A19 and/or BR30 bulbs.)
Handheld Remotes
These give you immediate access and control
of your audio/video equipment, lighting and
more—right from the comfort of your seat.
In-Wall Controllers
Keypads provide you with convenient
access to anything your URC system
can control. These are available as
simple keypads or fully functional
graphic touchsreen displays.
Chapter 1: URC LED Lighting Overview 2
Product Descriptions
Power
LAN
Wireless
Front Panel Descriptions
Power Illuminates when unit is ON
LED indicates:
LAN
• Illuminated: Connected
• Off: Not connected
LED indicates:
Wireless
• Illuminated: Communicating with Bulbs
• Off: Not connected
Power
Rear Panel Descriptions
DC 5V Port used to connect the supplied
Power
power cable. For best results, ONLY use the
supplied power cable.
LAN
Port used to connect ethernet cable to
communicate over the network.
LAN
(Ethernet )
Chapter 1: URC LED Lighting Overview 3
User Settable Scenes
The URC Professional Certified Installer has configured your LED light bulbs and gateway to work with your ccGEN2/Total Control
system.
In addition to turning your lights ON, OFF, dimming, and selecting a lighting scene, you also have the ability to adjust an individual
bulb’s lighting level. Each user interface or remote control may look different but the process is the same throughout.
When viewing the Scene menu:
1. Navigate to a lighting scene, then press and hold a scene for 4 seconds. A confirmation screen opens.
2. Select Yes to adjust the scene’s lighting level.
3. Set the individual lighting levels to your preference, by pressing the left/right hard buttons (or touchscreen buttons) to
raise/lower the lights.
4. Press Save to keep the adjusted lighting levels.
Specifications
TRF-GT1 Gateway
• Power: 5V DC, 290 mA
• Size: 3.5” x 1.5” x 2.8” (W x H x D)
• Weight: 2.6 oz.
Chapter 1: URC LED Lighting Overview 4
Chapter 2: Warranty and EULA
Limited Warranty Statement
1. Limited Warranty and Disclaimers
Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under
normal usage for one (1) year from purchase when such is purchased from URC. This limited warranty is valid only in the United States of
America. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of
delivery. URC SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS AND/OR OMISSIONS MADE IN THE URC
DOCUMENTATION. URC DOES NOT WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE OR THAT THERE ARE NO
ERRORS/BUGS IN THE URC SOFTWARE.
URC warrants that at the time of purchase the URC equipment and the URC software complied with all applicable regulations and
policies of the Federal Communications Commissions (“FCC”) regarding electromagnetic interference caused by electronic/computing
devices and to the extent that the URC equipment and/or the URC software fails to so comply, URC shall, at its own expense, take all
reasonable measures to promptly cause such to comply.
URC equipment purchases from other than an authorized URC dealer or distributor are without warranty.
THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE FOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY
PROVIDED FOR HEREIN, THE EQUIPMENT, SOFTWARE AND DOCUMENTATION OF URC ARE SUPPLIED “AS IS” WITHOUT ANY
WARRANTY, EXPRESS, STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URC
EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. URC DOES NOT WARRANT, GUARANTEE, OR MAKE ANY
REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN
TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES ARE SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS,
STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL
WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE
SKILL AND CARE, OR OUTCOME OR RESULTS.
WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE
FROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE
WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE.
Chapter 2: Warranty and EULA 5
The warranty limitations and warranty disclaimers may not apply to end user in whole or in part, where such are restricted or excluded
by applicable law and such shall apply to the maximum extent permitted by applicable law.
In the event of any warranty claim, URC will, at its sole option, repair the URC equipment using new or comparable rebuilt parts, or
exchange the URC equipment for new or rebuilt equipment. In the event of a defect, these are the end user’s exclusive remedies.
All the URC equipment returned for service, exchange or repair require an RGA number. To obtain an RGA number, you must complete a
Return Request Form which you may obtain by calling (914) 835-4484 or contacting URC at returnrequest@universalremote.com. To
obtain warranty service, end user must deliver the URC equipment, freight prepaid, in its original packaging or packaging affording
adequate protection to URC at 420 Columbus Avenue, Valhalla, NY 10595. It is end user’s responsibility to backup any macro
programming, artwork, software or other materials that may have been programmed into the unit. It is likely that such data, software, or
other materials will be lost during service and URC will not be responsible for any such damage or loss. A dated purchase receipt, bill of
sale, installation contract or other verifiable proof of purchase is required. For the URC equipment support and other important
information, please visit URC's website available at www.universalremote.com or call the Customer Service Center at (914) 835-4484.
This limited warranty only covers the URC equipment issues caused by defects in material or workmanship during ordinary consumer
use. It does not cover product issues caused by any other reason, including but not limited to product issues due to commercial use,
acts of God, third-party installation,misuse, limitations of technology, or modification of or to any part of the URC equipment. This
limited warranty does not cover the URC equipment sold as used, as is, refurbished, so called "B stock" or consumables (such as
batteries).This limited warranty is invalid if the factory applied serial number has been altered or removed from the URC equipment. This
limited warranty specifically excludes the URC equipment sold by unauthorized resellers.
With the exception of URC’s IR-only, broad-based consumer remotes, none of URC’s PC programmable remotes or any of our Total
Control® whole-house equipment are authorized for online internet sales. Buying URC’s PC programmable remotes or any of our Total
Control® whole-house equipment online means buying equipment that does not have a URC’s limited warranty. Such equipment is not
eligible for URC tech support or software support, either.
2. URC’S Limitations of Liability
IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF
ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO DATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS. URC’S
LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALL BE LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTS
PAID BY END USER FOR THE URC EQUIPMENT.
Chapter 2: Warranty and EULA 6
IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS CONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE. IN NO
EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF END USER OR ANY THIRD PARTY.
THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN WHOLE OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OR
EXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.
URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BY OTHERS.
SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
OR ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT
APPLY TO END USER. THIS LIMITED WARRANTY GIVES END USER SPECIFIC LEGAL RIGHTS AND END USER MAY HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION.
End User Agreement
The terms and conditions of the End User Agreement available at www.universalremote.com/eua.php shall apply.
Chapter 2: Warranty and EULA 7
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning!
Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user's authority to operate the equipment.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. The
antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Federal Communication Commission (FCC) Radiation Exposure Statement
The device and the antenna for this device must be installed to ensure a minimum separation distance of 20 cm or more form a person's
body. Other operating configurations should be avoided.
Chapter 2: Warranty and EULA 8
OCE-0141A Rev 01-140916
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
www.universalremote.com
Loading...