Universal Remote Control (URS) MRX-10 User Manual
Owner’s Manual
MRX-10 Advanced Network
System Controller
MRX-10 Owner’s Manual ©2010-2014 Universal Remote Control, Inc.
The information in this Owner’s Manual is copyright protected. No part of this
manual may be copied or reproduced in any form without prior written consent
from Universal Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN
THIS MANUAL.
The information in this Owner’s Manual may be subject to change without prior
notice.
Total Control is a registered trademark of Universal Remote Control, Inc.
URC - Control the Experience is a registered trademark of Universal Remote
Control, Inc.
All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.
Universal Remote Control,Inc.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OF CONTENTS
Introduction 1
Features and Benefits 1
Parts Guide 1
Front Panel Descriptions 2
Rear Panel Descriptions 3
Specifications 4
Limited Warranty Statement 5
End User Agreement 7
Federal Communication Commission
Interference Statement 8
Regulatory Information to the user 9
Declaration of Conformity 10
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER
Introduction
The MRX-10 Advanced Network System Controller controls all
MRX series connected devices throughout the entire home. Press a
button on a Total Control remote or keypad to issue a command
from the MRX-10 to turn off the lights in every room all while
watching a movie. View the artist name, song title and album art
your child is listening to in their room from a Total Control remote
or keypad. Also control whole house music from sources such as a
DMS-1200, DMS-100, SNP-1 and a PSX-2.
Features and Benefits
l Stores and issues commands and macros for all IP, IR, RS-
232, Relay, Sensor and 12V controlled devices to MRX series
base stations in one system.
l Provides 2-Way communication with Total Control remotes
and keypads.
l Control URC Lighting with an optional RFTX-1 RF Transmitter.
l Can be programmed off premises via the internet.
l Easy rack-mounting via optional RMK-1 rack mounting kit.
Parts Guide
The MRX-10 Advanced Network System Controller includes:
1 - MRX-10 Network System 1 - Ethernet Cable
1 - AC Power Adapter 8 - IR Emitters with standard 3.5mm
1 - Power Cord plugs
1 - Adjustment Tool 1 - Installation Manual
Page 1
MRX-10 ADVANCED NETWORK SYSTEM CONTROLLER
Front Panel Descriptions
The front panel consists of 2 indicator lights which will illuminate
when in use.
Power LED
Ethernet LED Total Control llumination
Reset
Power LED: Indicates that the MRX-10 is powered on when lit.
Ethernet LED: Indicates the network connectivity status of the MRX-
10. On=Connected, Off=not connected, Blinking=attempting to
connect.
Total Control Illumination: Attractive, adjustable accent lighting.
Reset: Press for one second and release to reboot the MRX-10.
Page 2
Loading...