Universal remote control MX-450 User Manual

MX-450:Auxiliary Remote Macro Editing On Screen No PC Required
Eliminate Programming Bottlenecks!
Specify MX-450’s for secondary rooms and areas.There is a very strong
demand for lower priced controllers to operate modest priced home
theaters and secondary rooms in larger installations, such as master
bedrooms, studies and kitchens. Many dealers do not provide all of
programming by a PC equipped programmer a bottleneck to pro-
duction. As a result, dealers utilize remotes that program stand-
alone, without a PC. Installers forced to setup these standalone
programming remotes are often frustrated in any attempt to
make the remote automate the system using macros.
View and Edit Macros on Screen
Macro programming is a critical function for delivering a specific sequence of commands to a variety of components in order to provide clients with an easy to use system. In all past standalone
programmed remotes, installers were faced with the challenging
task of programming macros without being able to modify their
work on the fly. Thus, if one step is wrong in the macro (for
example, one delay is too short); the entire macro had to be
deleted and completely re-programmed.
Until now, that is. The MX-450's most revolutionary feature is
Macro Editing. This has never been seen before in a standalone pro-
grammed remote. At last, the programmer can see the actual macro
steps clearly displayed on the remote controls' screen. Fine tuning, re-
ordering, adjusting delays and adding steps to the macros can nowbe
done without deleting previous work!
Delight Clients with Bright Color and Great Ergonomics
The new URC MX-450 delivers an easy to sell cutting edge form factor, extraordinary functionality and a beautiful color display. The graphical user interface is bright and easily backlit at the touch of the Light button. Engaging graphical icons for devices, activities and the most popular chan­nels are all pre-programmed.
COMP L E TE
CONTROL
COMP L E TE
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
www
.universalremote.com
Specifications
LCD Screen - 2” TFT Color LCD (176 x 220 Pixels)
Memory - 32 Megabits of Flash Memory
Total Customization Capability - Up to 18 devices on 3 Main pages with up to 8 pages for each device; plus up to eight pages of favorite channels for a total of 155 pages.
Learning Capability - Standard frequencies (15kHz to 460kHz)
Macro Capability - Up to 255 steps each
IR Range (Line of Sight via Infrared) - 30-50 feet, depending on the environment
RF Range (radio frequency) - 50 to 100 feet, depend­ing upon the environment
RF Frequency - 418MHz
Weight - 9 ounces (with battery loaded)
Size - 8” H x 2.25” W x 1.25” D
Batteries - Four AA Alkaline Batteries (included)
Battery Life - 18 Hours of continuous button press­ing with backlighting and LCD ON (months of use for most users). Users should expect some variation based on the brand of alkaline batteries used.
Note: In actual use, the MX-450 protects itself if it gets stuck between couch cushions (with a button being continuously pressed). After 30 seconds the MX-450 will turn off, and will not turn on again until the button is released.
COMP L E TE
CONTROL
COMP L E TE
Adjust Delays on the Fly
By simply selecting the Delay you want to adjust, then using the Left/Right Cursor buttons, you can increase or decrease the amount of delay in the macro.
Add/Insert Steps or Jumps
At any time you can add a new step to a macro.The step will be inserted after the step you select in the macro list. By selecting a Jump step from the Add Menu, you can reset the jump destina­tion using the Left/Right cursor buttons.
Move/Re-order Steps Anywhere
Simply select a step with the SEL button, then use the Up/Down Cursor buttons to move it to a new position.
Test Macros While You Edit, Save When It Works!
Instead of constantly entering and exiting setup mode to test, simply test and keep working until you have success. No more wasted time.
The MX-450 Standalone Setup Revolution - Macro Editing On Screen!
Loading...