United office KH 4407 User Manual [da]

3
SHREDDER
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
www.kompernass.com
ID-Nr.: KH4407-01/10-V2
KH4407
Shredder
Operating instructions
Silppuri
Käyttöohje
Dokumentförstörare
Bruksanvisning
Makuleringsmaskine
Betjeningsvejledning
Οδηγίες χρήσης
Aktenvernichter
Bedienungsanleitung
KH 4407
1234
5
6
7
CONTENT PAGE
Intended Use 2 Important safety instructions 2 Technical data 3 Items supplied 3 Appliance description 3 Commissioning 3 Operation 3 Emptying the waste container 4 Cleaning 5 Disposal 5 Warranty & Service 5 Importer 6 Troubleshooting 6
Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass the manual on to whomsoever might acquire the appliance at a later date.
- 1 -
SHREDDER KH 4407
Intended Use
This Shredder is intended exclusively for the shredding of paper, credit cards and CD’s. All other usages or modifications are regarded as contrary to the operating instructions and contain a considerable risk of accidents.
Important safety instructions
The following safety instructions must always be complied with when using electrical appliances:
• Do not place the appliance in close vicinity to sources of heat and water source .
• Do not use the appliance close to inflammable or explosive materials and/or ignitable gases or in dusty environments.
• Do not use the appliance outdoors.
To avoid potentially fatal electric shocks:
• Should the power cable or the plug become damaged, arrange for it/them to be repaired by authorised specialists or Customer Services as soon as possible.
• Arrange for damaged or malfunctioning applian­ces to be inspected and/or repaired by a quali­fied specialist or the Customer Service Depart­ment as soon as possible.
• Do not expose the appliance to rain and never use it in a humid or wet environment.
• Ensure that the power cable never becomes moist or wet during operation.
To avoid the risk of personal injury:
• The Shredder should be used by only one per­son at a time.
• Never leave the appliance unsupervised during use.
• Keep loose clothing , long hair and jewel­lery etc well away from the cutter opening.
• NEVER place your fingers into the cutter opening
.
• NEVER place a finger into the central hole of a CD when you are feeding it into the appliance.
• Keep pets away from the appliance. They could injure themselves.
• This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used.
• The packaging material can be a source of dan­ger for children. Dispose of the material immedi­ately after unpacking or keep it in a safe place not accessible to children.
• Lay the power cable in such a way that no one can tread on or trip over it.
- 2 -
Tips for safety:
• Place the appliance in the immediate vicinity of an electrical power socket. Do not use an exten­sion cable. Ensure that the appliance and the po­wer socket are easily and quickly accessible in the event of an emergency.
• Never overburden the appliance. The paper shredder is designed for brief operating periods.
• In cases of danger, immediately remove the elec­trical plug from the socket.
• NEVER use the shredder for tasks for which it was not designed.
• Always be attentive! Always pay attention to what you are doing and act with common sense. Never use the appliance when you are distracted or don’t feel well.
Technical data
Mains voltage: 220-240 V ~50Hz Nominal current: 1,8 A Rated output: 380 W Protection class: II Cutting process for Paper: Crosscut, 4x18 mm particles Working width: 223 mm CO Time: 3 minutes
Appliance description
Cutter attachment
q
Switch
w
Cutter opening for CD/Credit cards
e
Cutter opening for paper
r
Large waste receptacle (Paper)
t
Power cable
y
Small waste receptacle (transparent) /
u
Viewing window
Commissioning
• First of all, place the cutter attachment qonto the large waste receptacle cable side.
• Slide the small waste receptacle in the opening on the front side of the large wa­ste receptacle
• Connect the paper shredder to a power socket.
is located at the rear, i.e. on the closed
y
.
t
so that the power
t
for plastics
u
Operation
Switching the appliance on:
• Place the switch shredding.
to the position for
w
CO Time
The C.O. Time (Continuous Operation) details how long an appliance may be used without the motor overheating and being damaged. After the appliance has run for for this period it must be switched off until the motor has cooled itself down.
Items supplied
Shredder KH 4407 Operating Instructions
Inserting paper:
• Insert paper from above and in portrait format into the cutter opening for paper
The motor starts automatically and switches itself off automatically if no further paper is inserted. You can shred up to 7 sheets (80g/m same time.
- 3 -
.
r
2
paper) at the
Inserting credit cards:
• Open the safety flap over the cutter opening for CD/Credit cards
• Insert the credit card from above into the middle of the CD/Credit card cutter opening can only shred one credit card at a time. ALWAYS insert them into the CD/Credit card cutter opening
with the broad side leading. If you do not,
e
the magnetic strip will not be destroyed.
e
.
. You
e
Note: Always insert the credit card into the
middle of the cutter opening the shredding process will not start!
. If you do not,
e
Note: Should you need to be absolutely sure
that the information on the magnetised strip has been irrevocably destroyed, insert the cre­dit card into the middle of the cutter opening for paper Take note that the waste will then fall into the large collection container ty if first, so as to ensure an easier separation of paper and plastic waste..
Inserting a CD:
r
.
. If need be, emp-
t
Warning!: NEVER place a finger into the cen-
tral hole of a CD when you are feeding it into the appliance.
• Insert the CD from above into the middle of the CD/Credit card cutter opening shred one CD at a time.
Clearing a material blockage:
• Press and hold the switch the item to be shredded become jammed. The appliance now goes into reverse and the material to be shredded is returned.
• Place the switch soon as the jammed item is returned.
Switching the appliance off:
• To switch the appliance off, move the switch into the middle position (OFF).
w
into position (OFF) as
w
. You can only
e
in position should
w
Emptying the waste container
• Empty the waste container t/uregularly.
• Dispose of the waste material in an environmen­tally responsible manner.
Emptying the large waste container (Paper)
Important: Remove the power plug from the
wall socket to avoid an unintended starting of the appliance.
• Remove the cutter attachment waste container
• Remove the small waste container of the large waste container not fall out.
• Empty the large waste container everything back together again.
Emptying the small waste container (Plastic)
• Remove the small waste container front of the large waste container
• Replace it after emptying it.
Notice regarding overheating of the appliance:
If it overheats, the appliance switches itself off automatically.
t
.
Important: Remove the power plug from the
wall socket to avoid an unintended starting of the appliance.
• To switch the appliance off, move the switch into the middle position (OFF).
• Empty the waste containers
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch is placed in the position .
from the large
q
u
, so that it does
t
and then put
t
u
to empty it.
t
.
t/u
at the front
from the
w
w
- 4 -
Cleaning
Warranty & Service
Danger! Always remove the power plug
before cleaning the appliance. There is a risk of electric shock!
Warning!! The cutters in the appliance are
very sharp! Risk of personal injury!
• Empty the waste containers t/uregularly.
• Clean the waste containers attachment and, if required, with a mild detergent.
• Remove possible residues in the cutter openings
e/r
ance is unplugged before commencing this!
with a lightly moistened cloth
q
with a suitable object. Ensure that the appli-
t/u
and the cutter
Disposal
Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC.
Dispose of the appliance through an approved dis­posal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
Dispose of all packaging materials in an environmentally responsible manner.
The warranty for this appliance is for 3 years from the date of purchase. The appliance has been ma­nufactured with care and meticulously examined be­fore delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Depart­ment. Only in this way can a post-free despatch for your goods be assured.
The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile compo­nents, e.g. buttons or batteries. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampe­ring not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. The warranty period will not be extended by repairs made under warranty. This applies also to replaced and repaired parts. Any damage and defects extant on purchase must be reported immediately after un­packing the appliance, at the latest, two days after the purchase date. Repairs made after the expira­tion of the warranty period are subject to payment.
DES UK LTD
Tel.: 0871 5000 700 e-mail: support.uk@kompernass.com
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
e-mail: support.ie@kompernass.com
(£ 0.10 / minute)
- 5 -
Importer
KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY
www.kompernass.com
Troubleshooting
If the material to be shredded jams:
This means that you have attempted to feed too much material into the appliance (max. 7 sheets 80g/m max. 1 CD/DVD).
• Place the switch to be shredded become jammed. The appliance now goes into reverse and the material to be shredded is returned.
• Place the switch soon as the jammed item is returned.
If the appliance suddenly ceases operation:
This means that the appliance has overheated and the automatic safety cut-out has activated itself.
Important: Remove the power plug from the
wall socket to avoid an unintended starting of the appliance
2
paper, max. 1 credit card,
in position should the item
w
in position (OFF), as
w
If the appliance doesn`t allow itself to be switched on:
• Check that the plug is correctly connected to a wall socket.
• Try out a different wall socket.
• The appliance is probably defective. Have the appliance checked by qualified specialists.
When the appliance is switched on, however, the shredding process will not start:
• The appliance has overheated and triggered the automatic safety switch-off.
Important: Remove the power plug from the
wall socket to avoid an unintended starting of the appliance.
• To switch the appliance off, move the switch into the middle position (OFF).
• Allow the appliance to cool down.
• Replace the power plug into the socket.
• Switch the appliance on, in that the switch is placed in the position .
The cutter attachment
• Place the cutting attachment position.
is not correctly placed.
q
in the correct
q
w
w
• To switch the appliance off, move the switch into the middle position (OFF).
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch is placed in the position .
w
w
- 6 -
SISÄLLYSLUETTELO SIVU
Määräystenmukainen käyttö 8 Tärkeitä turvaohjeita 8 Tekniset tiedot 9 Toimituslaajuus 9 Laitteen kuvaus 9 Käyttöönotto 9 Käyttö 9 Keruusäiliön tyhjentäminen 10 Puhdistus 11 Hävittäminen 11 Takuu & huolto 11 Maahantuoja 11 Vikatapauksessa 12
Säilytä käsikirja myöhempää käyttöä varten. Jos myyt laitteen, anna käsikirja uudelle omistajalle!
- 7 -
SILPPURI KH 4407
Määräystenmukainen käyttö
Asiakirjasilppuri soveltuu ainoastaan paperin, luottokorttien ja CD-levyjen silppuamiseen. Laitteen muu käyttö tai muuttaminen on määräysten vastaista ja aiheuttaa huomattavia tapaturmavaaroja.
Tärkeitä turvaohjeita
Seuraavia turvaohjeita on noudatettava aina sähkölaitteita käytettäessä:
• Älä aseta laitetta lämpö- tai vesilähteiden lähel­le.
• Älä käytä laitetta pölyisissä tai räjähdysalttiissa ympäristöissä (syttyvät kaasut, höyryt, orgaanisten liuottimien höyryt).
• Älä käytä laitetta ulkoilmassa.
Hengenvaarallisen sähköiskun välttämiseksi:
• Anna vialliset virtajohdot tai verkkopistokkeet heti valtuutetun ammattihenkilöstön tai valtuu­tetun huoltoliikkeen vaihdettavaksi vaarojen välttä­miseksi.
• Anna vaurioituneet ja muut kuin moitteettomasti toimivat laitteet välittömästi valtuutetun ammatti­henkilöstön tai huoltoliikkeen tutkittavaksi ja korjattavaksi.
• Älä altista laitetta sateelle, äläkä myöskään koskaan käytä sitä kosteassa tai märässä ympäristössä.
• Varmista, ettei virtajohto koskaan kastu tai kostu käytön aikana.
Loukkaantumisvaaran välttäminen:
• Vain yksi henkilö kerrallaan saa käyttää asiakir­jasilppuria.
• Laitetta ei saa koskaan jättää ilman silmälläpitoa käytön aikana.
• Pidä väljä vaatetus , pitkät hiukset , korut ja vastaavat poissa leikkuuaukkojen läheltä.
• Älä koskaan työnnä sormia leikkuuaukkoihin
.
• Älä koskaan työnnä sormiasi CD:n keskellä olevaan reikään työntäessäsi CD:tä silppuriin.
• Pidä eläimet poissa laitteen läheltä. Ne saattavat loukata itsensä.
• Tätä laitetta ei ole tarkoitettu sellaisten henkilöiden (mukaan lukien lapset) käyttöön, joiden rajoitetut, fyysiset, aistilliset tai henkiset kyvyt tai kokemuksen ja/tai tiedon puute estävät käytön, lukuun ottamatta tilanteita, joissa heitä valvoo turvallisuudesta vastaava henkilö tai joissa he ovat saaneet tältä ohjeita laitteen käytöstä.
• Pakkausmateriaali saattaa olla lapsille vaarallista. Hävitä pakkausmateriaali välittömästi pakkauksen avaamisen jälkeen tai säilytä sitä lapsilta ulottu­mattomissa.
• Sijoita verkkojohto siten, että sen päälle ei voi astua tai ettei siihen voi kompastua.
Näin toimit turvallisesti:
• Sijoita laite pistorasian välittömään läheisyyteen. Älä käytä jatkojohtoa. Huolehti siitä, että laite ja verkkopistoke ovat helppopääsyisessä paikassa ja hätätilanteessa heti käsillä.
• Älä ylikuormita laitetta. Asiakirjasilppuri on tarkoitettu käytettäväksi lyhyitä ajanjaksoja kerrallaan.
• Vedä vaaran uhatessa pistoke heti pistorasiasta.
• Älä koskaan käytä asiakirjasilppuria tarkoituk­senvastaisesti.
• Ole aina tarkkaavainen! Keskity siihen mitä teet ja toimi aina järkevästi. Älä koskaan käytä laitetta, jos et pysty keskittymään tai jos et tunne oloasi hyväksi.
- 8 -
Tekniset tiedot
Käyttöönotto
Verkkojännite: 220-240 V ~50 Hz Nimellisvirta: 1,8 A Nimellisteho: 380 W Suojausluokka: II Paperin leikkaustapa: ristiinleikkaus, 4x18 mm:n
partikkelit Työskentelyleveys: 223 mm LK-aika: 3 minuuttia
LK-aika
LK-aika (lyhytaikaiskäyttö) ilmoittaa, kuinka kauan laitetta voidaan käyttää moottorin ylikuumenematta ja vaurioitumatta. Annetun LK-ajan jälkeen laite on kytkettävä pois päältä niin pitkäksi aikaa, että moot­tori on jäähtynyt.
Toimituslaajuus
Silppuri KH 4407 Käyttöohje
Laitteen kuvaus
Leikkuulaite
q
Kytkin
w
Leikkuuaukko CD/luottokortti
e
Leikkuuaukko paperi
r
Suuri keruusäiliö (paperille)
t
Virtajohto
y
Pieni keruusäiliö (läpinäkyvä) / tarkastusikkuna
u
• Aseta seuraavaksi leikkuulaite qkeruusäiliölle niin, että virtajohto ysijaitsee takana, sulje-
t
tulla puolella.
• Työnnä pieni muovijätteiden keruusäiliö
keruusäiliön
• Liitä asiakirjasilppuri pistorasiaan.
etupuolella olevaan aukkoon.
t
u
suuren
Käyttö
Laitteen käynnistäminen:
• Aseta kytkin
.
Paperin syöttäminen:
• Vie paperi pystyasennossa paperin leikkuuaukkoon ylhäältä käsin.
r
Moottori käynnistyy automaattisesti ja sammuu myös jälleen automaattisesti, kun paperia ei syötetä lisää. Laite leikkaa jopa 7 arkkia (80g/m ria) samanaikaisesti.
Luottokortin syöttäminen:
• Avaa CD-/luottokorttileikkuuaukon
oleva turvaläppä.
• Vie luottokortti ylhäältä keskelle CD-/luottokortti-
leikkuuaukkoa luottokortin kerrallaan. Vie luottokortti CD-/luotto­korttileikkuuaukkoon Muuten magneettinauha ei tuhoudu.
Ohje: Vie luottokortti aina keskelle CD-/luotto-
korttileikkuuaukkoa ei käynnisty!
silppuamista varten asentoon
w
e
. Laite leikkaa vain yhden
e
aina leveä sivu edellä.
e
. Muutoin leikkuutapahtuma
e
2
-pape-
päällä
- 9 -
Ohje: Jos haluat olla varma, että magneettirai-
dassa olevat tiedot tuhoutuvat lopullisesti, työn­nä luottokortti keskelle paperille tarkoitettua leikkuuaukkoa Huomaa, että jätteet putoavat silloin suureen keruusäiliöön ennen, jotta voit lajitella paperi- ja muovijätteet helpommin.
CD-levyn syöttäminen:
.
r
. Tyhjennä se tarvittaessa tätä
t
Keruusäiliön tyhjentäminen
• Tyhjennä keruusäiliöt t/usäännöllisesti.
• Hävitä jätteet ympäristöystävällisesti.
Suuren keruusäiliön (paperi) tyhjentäminen
Huomio: Irrota verkkopistoke pistorasiasta
tahattoman käynnistämisen välttämiseksi.
Varoitus: Älä koskaan työnnä sormiasi CD:n
keskellä olevaan reikään työntäessäsi CD:tä silppuriin.
• Vie CD ylhäältä keskelle CD-/luottokorttileikkuu­aukkoa kerrallaan.
Materiaalitukoksen selvittäminen:
• Siirrä kytkin jää kiinni. Takaperoiskäynti on nyt päällä ja leikattava tuo­te kulkeutuu jälleen ulos.
• Aseta kytkin leikattava tuote on syötetty ulos.
Laitteen sammuttaminen:
• Sammuta laite asettamalla kytkin
. Laite leikkaa vain yhden CD-levyn
e
asentoon , jos leikattava tuote
w
asentoon (OFF) heti, kun
w
(OFF).
keskiasentoon
w
• Poista leikkuulaite qsuurelta keruusäiliöltä t.
• Irrota pieni keruusäiliö eteenpäin vetämällä, jotta se ei putoaisi ulos
t
säiliötä tyhjennettäessä.
• Tyhjennä suuri keruusäiliö
kaikki osat yhteen.
Pienen keruusäiliön (muovi) tyhjentäminen
• Irrota pieni keruusäiliö eteenpäin vetämällä tyhjennystä varten.
t
• Aseta se tyhjennyksen jälkeen takaisin paikoilleen.
Ohje laitteen ylikuumentumisen varalle:
Ylikuumentuessaan laite sammuu automaattisesti.
suuresta keruusäiliöstä
u
ja aseta jälleen
t
suuresta keruusäiliöstä
u
Huomio: Irrota verkkopistoke pistorasiasta
tahattoman käynnistämisen välttämiseksi.
• Sammuta laite asettamalla kytkin wkeskiasentoon
(OFF).
• Tyhjennä keruusäiliöt
• Anna laitteen jäähtyä.
• Liitä verkkopistoke jälleen pistorasiaan.
• Kytke laite päälle asettamalla kytkin
.
t/u
.
asentoon
w
- 10 -
Loading...
+ 26 hidden pages