Uniflame 269922 Owner's Manual

®

Outdoor Patio Heater

A

B

C

Wheel Assembly Kit

Component

1. Wheel Assembly . . . . . . . . . . . . . . . . . . . . . 56-01-378

Step

Attach wheel assembly during heater assembly

Note: Attach wheel assembly to base prior to attaching the weight plate.

A. Attach wheel assembly to base using 2 sets of wheel bolts (A), wheel washers (C) and wheel nuts (B).

B. Continue heater assembly in Owner’s Manual.

1

Hardware

A Wheel Bolt 2 pcs

5/16” - 18 x 15 Stainless Steel Hex Head Bolt

B Wheel Nut 2 pcs

5/16” - 18 Stainless Steel Hex Nut

C Wheel Washer 2 pcs

8 mm Stainless Steel Washer

Attach wheel assembly after heater is assembled

A. Lay heater on its side. Be careful not to damage your dome. Support the post on a box or other sturdy item.

B. Remove weight plate, if needed.

C. Attach wheel assembly to base using 2 sets of wheel bolts (A), wheel washers (C) and wheel nuts (B).

D. Reassemble weight plate, if removed.

E. Stand heater upright.

Manufactured in China for:
Blue Rhino Global Sourcing, LLC
104 Cambridge Plaza Drive, Winston-Salem, NC 27104 USA

1.800.762.1142, www.bluerhino.com

© 2005 Blue Rhino Global Sourcing, LLC. All Rights Reserved
Endless Summer® is a Registered Trademark of Blue Rhino Global Sourcing, LLC. All Rights Reserved

WK-INS-100 E